[ANN] FujiCoin | Japan | Since 2014 | The Best Crypto Currency

[tandang2]

Beta test of Electrum-FJC

We will begin the beta test of Electrum-FJC.
This time is Windows .exe version.
This is for 64 bit operating system, be careful.
If you participate in the test please follow the procedure below.

· Download from the following URL.
http://www.fujicoin.org/fujicoin/2.0/electrum-FJC-2.8.3.zip
· Please unzip this to your favorite place.
· Please make shortcut if necessary.
· Please post problems etc. after the test.

Thank you.
 

Waw is good, i wish this can for 32 bit operation system window
And do you can make electrum fjc for android ??

Thanks

[1713556914]

1713556914

[motty]

Waw is good, i wish this can for 32 bit operation system window
And do you can make electrum fjc for android ??

Thanks

I added 32bit now.
 

[motty]

I would be able to host a Fujicoin-electrum server if you like. I saw that the source code is available on GitHub for the server. I wonder if it would be possible to run this on a raspberry pi.. 

Hi MoonWhale,

The electrum-FJC's server needs absolute trust.
So, it is difficult for you to operate the server.
 

[Rw13enlib88]

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!


edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

LEDGER






TREZOR

[motty]

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
 

[tandang2]

Waw is good, i wish this can for 32 bit operation system window
And do you can make electrum fjc for android ??

Thanks

I added 32bit now.
 

Ok thanks
Do you have electrum fjc for android?
So i can check it, everywhere ina anywhere. In my smartphone

I wish this coin will rissing up, price now is so low , just 30-50 satoshi

So, i am sorry for bad english

Thanks

[Rw13enlib88]

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
 

Hi motty,

my pleasure to help testing ElectrumFJC!   

I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem.
At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin.
I understand is very risky but i needed to try 
There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor

[motty]

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
 

Hi motty,

my pleasure to help testing ElectrumFJC!  

I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem.
At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin.
I understand is very risky but i needed to try  
There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor

Hi Rw,

I fixed the code on the hardware wallet.
And I replaced the executable file of the download site.
Please download again.
I think that connection will be refused by TREZOR this time. (?)

I have informed to TREZOR the code to be rewritten of the firmware.
Then just wait for Fujicoin to be registered in the firmware.
 

[Rw13enlib88]

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
 

Hi motty,

my pleasure to help testing ElectrumFJC!  

I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem.
At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin.
I understand is very risky but i needed to try  
There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor

Hi Rw,

I fixed the code on the hardware wallet.
And I replaced the executable file of the download site.
Please download again.
I think that connection will be refused by TREZOR this time. (?)

I have informed to TREZOR the code to be rewritten of the firmware.
Then just wait for Fujicoin to be registered in the firmware.
 

Hi motty,

I've downloaded and I see the new the new messages

For ledger


And I still have the TREZOR wallet but i guess is because I already have it done



Can you also ask Ledger to include Fuji please?
Not sure where the issue/pull request should go, but this is their git
https://github.com/LedgerHQ


btw, we need more tweets like this, community asking for FJC integration in the new firmware
https://twitter.com/Exchangewatch3r/status/883821598406475777

[motty]

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
 

Hi motty,

my pleasure to help testing ElectrumFJC!  

I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem.
At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin.
I understand is very risky but i needed to try  
There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor

Hi Rw,

I fixed the code on the hardware wallet.
And I replaced the executable file of the download site.
Please download again.
I think that connection will be refused by TREZOR this time. (?)

I have informed to TREZOR the code to be rewritten of the firmware.
Then just wait for Fujicoin to be registered in the firmware.
 

Hi motty,

I've downloaded and I see the new the new messages

For ledger


And I still have the TREZOR wallet but i guess is because I already have it done



Can you also ask Ledger to include Fuji please?
Not sure where the issue/pull request should go, but this is their git
https://github.com/LedgerHQ


btw, we need more tweets like this, community asking for FJC integration in the new firmware
https://twitter.com/Exchangewatch3r/status/883821598406475777

Hi Rw,

I fixed the coin name from "Bitcoin" to "FujiCoin".
For example, I think TREZOR is making a DB using the coin number as a key.
Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.
 

[Rw13enlib88]

Hi Rw,

I fixed the coin name from "Bitcoin" to "FujiCoin".
For example, I think TREZOR is making a DB using the coin number as a key.
Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.
 

Hi motty,

I have tried with my trezor but it still opens the previous one.
I'm gonna wipe out and try again, but I have to move the dust first
I've already tried but wallet.trezor.io is showing this message:
"The bitcore server doesn't seem to reply. Please select another server."

[motty]

Hi Rw,

I fixed the coin name from "Bitcoin" to "FujiCoin".
For example, I think TREZOR is making a DB using the coin number as a key.
Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.
 

Hi motty,

I have tried with my trezor but it still opens the previous one.
I'm gonna wipe out and try again, but I have to move the dust first
I've already tried but wallet.trezor.io is showing this message:
"The bitcore server doesn't seem to reply. Please select another server."

Hi Rw,

Thank you for the information
I understood the content and I will try to fix it.
 

[motty]

Hi Rw,

I fixed the coin name from "Bitcoin" to "FujiCoin".
For example, I think TREZOR is making a DB using the coin number as a key.
Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.
 

Hi motty,

I have tried with my trezor but it still opens the previous one.
I'm gonna wipe out and try again, but I have to move the dust first
I've already tried but wallet.trezor.io is showing this message:
"The bitcore server doesn't seem to reply. Please select another server."

Hi Rw,

Thank you for the information
I understood the content and I will try to fix it.
 

Hi Rw,

I reviewed the interface code with TREZOR.
Please download again and test.

[Rw13enlib88]

Hi motty,

I've downloaded and if I try with the previous wallets



and if i try to create a new wallet



the problem in both cases is that trezor is not recognized
(in wallet.trezor.io is working good so it's not trezor's problem)

I have tried with another trezor and same problem at creating a new wallet


I have tried with Ledger and it's working!




but...

[motty]

Hi motty,

I've downloaded and if I try with the previous wallets



and if i try to create a new wallet



the problem in both cases is that trezor is not recognized
(in wallet.trezor.io is working good so it's not trezor's problem)

I have tried with another trezor and same problem at creating a new wallet


I have tried with Ledger and it's working!




but...

This time I reviewed the code provided by each maker of HD-Wallet.
https://github.com/fujicoin/electrum-fjc/tree/master/hdmodules

Regarding TREZOR, since coin name and parameters accepting connection are defined in firmware, I think that it is more appropriate not to connect when setting as Fujicoin correctly.
In short, it means that you can not connect without faking it.

I also reviewed the code for Ledger.
The cause of the error is not yet well understood now.
 

[Rw13enlib88]

This time I reviewed the code provided by each maker of HD-Wallet.
https://github.com/fujicoin/electrum-fjc/tree/master/hdmodules

Regarding TREZOR, since coin name and parameters accepting connection are defined in firmware, I think that it is more appropriate not to connect when setting as Fujicoin correctly.
In short, it means that you can not connect without faking it.

I also reviewed the code for Ledger.
The cause of the error is not yet well understood now.
 

So bad TREZOR we cannot use it until it's included in the firmware

You can ask Ledger dev here:
http://slack.ledger.co/
They have said in twitter that doubts can be asked
https://twitter.com/BTChip/status/884611035277217792

I'm gonna research if we can contact Trezor's dev to solve the issue

[deztroyr1]

good to see the current progress 

[motty]

This time I reviewed the code provided by each maker of HD-Wallet.
https://github.com/fujicoin/electrum-fjc/tree/master/hdmodules

Regarding TREZOR, since coin name and parameters accepting connection are defined in firmware, I think that it is more appropriate not to connect when setting as Fujicoin correctly.
In short, it means that you can not connect without faking it.

I also reviewed the code for Ledger.
The cause of the error is not yet well understood now.
 

So bad TREZOR we cannot use it until it's included in the firmware

You can ask Ledger dev here:
http://slack.ledger.co/
They have said in twitter that doubts can be asked
https://twitter.com/BTChip/status/884611035277217792

I'm gonna research if we can contact Trezor's dev to solve the issue

Hi Rw,

I have made a pull request for Ledger.
https://github.com/LedgerHQ/ledger-wallet-chrome/pull/37
 

and trezor, keepkey
https://github.com/trezor/trezor-mcu/pull/192
https://github.com/keepkey/keepkey-firmware/pull/18
 

[MoonWhale]

Will FujiCoin work with Nano Ledger S? 

[motty]

Will FujiCoin work with Nano Ledger S? 

Yes, perhaps all Ledgers.