tandang2
|
|
July 10, 2017, 10:22:11 AM |
|
Beta test of Electrum-FJCWe will begin the beta test of Electrum-FJC. This time is Windows .exe version. This is for 64 bit operating system, be careful. If you participate in the test please follow the procedure below. · Download from the following URL. http://www.fujicoin.org/fujicoin/2.0/electrum-FJC-2.8.3.zip· Please unzip this to your favorite place. · Please make shortcut if necessary. · Please post problems etc. after the test. Thank you. Waw is good, i wish this can for 32 bit operation system window And do you can make electrum fjc for android ?? Thanks
|
|
|
|
motty (OP)
|
|
July 10, 2017, 10:47:51 AM |
|
Waw is good, i wish this can for 32 bit operation system window And do you can make electrum fjc for android ??
Thanks
I added 32bit now.
|
|
|
|
motty (OP)
|
|
July 10, 2017, 11:05:59 AM |
|
I would be able to host a Fujicoin-electrum server if you like. I saw that the source code is available on GitHub for the server. I wonder if it would be possible to run this on a raspberry pi.. Hi MoonWhale, The electrum-FJC's server needs absolute trust. So, it is difficult for you to operate the server.
|
|
|
|
Rw13enlib88
Legendary
Offline
Activity: 2142
Merit: 1025
|
|
July 10, 2017, 07:09:36 PM Last edit: July 10, 2017, 07:22:33 PM by Rw13enlib88 |
|
My AV is giving security warnings with the links I've tested it and ledged haven't worked but trezor yes!!! hurra!! edit: but problems trying to move FJC back to ccex edit2: when I disconnect the trezor, the logo of trezor with the green point is still there LEDGER TREZOR
|
|
|
|
motty (OP)
|
|
July 10, 2017, 10:35:19 PM |
|
My AV is giving security warnings with the links
I've tested it and ledged haven't worked but trezor yes!!! hurra!!
edit: but problems trying to move FJC back to ccex edit2: when I disconnect the trezor, the logo of trezor with the green point is still there
Hi Rw, Thank you for reporting. It was good that Wallet could physically connect with TREZOR. But it is a very dangerous test. Basically it can not be used normally until TRZOR supports Fujicoin. TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin. Then, it is highly likely that the bitcoin wallet in TREZOR is broken. I think that it is necessary to reset TRZOR.
|
|
|
|
tandang2
|
|
July 10, 2017, 11:34:43 PM |
|
Waw is good, i wish this can for 32 bit operation system window And do you can make electrum fjc for android ??
Thanks
I added 32bit now. Ok thanks Do you have electrum fjc for android? So i can check it, everywhere ina anywhere. In my smartphone I wish this coin will rissing up, price now is so low , just 30-50 satoshi So, i am sorry for bad english Thanks
|
|
|
|
Rw13enlib88
Legendary
Offline
Activity: 2142
Merit: 1025
|
|
July 11, 2017, 01:48:23 AM |
|
My AV is giving security warnings with the links
I've tested it and ledged haven't worked but trezor yes!!! hurra!!
edit: but problems trying to move FJC back to ccex edit2: when I disconnect the trezor, the logo of trezor with the green point is still there
Hi Rw, Thank you for reporting. It was good that Wallet could physically connect with TREZOR. But it is a very dangerous test. Basically it can not be used normally until TRZOR supports Fujicoin. TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin. Then, it is highly likely that the bitcoin wallet in TREZOR is broken. I think that it is necessary to reset TRZOR. Hi motty, my pleasure to help testing ElectrumFJC! I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem. At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin. I understand is very risky but i needed to try There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor
|
|
|
|
motty (OP)
|
|
July 11, 2017, 01:58:22 AM |
|
My AV is giving security warnings with the links
I've tested it and ledged haven't worked but trezor yes!!! hurra!!
edit: but problems trying to move FJC back to ccex edit2: when I disconnect the trezor, the logo of trezor with the green point is still there
Hi Rw, Thank you for reporting. It was good that Wallet could physically connect with TREZOR. But it is a very dangerous test. Basically it can not be used normally until TRZOR supports Fujicoin. TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin. Then, it is highly likely that the bitcoin wallet in TREZOR is broken. I think that it is necessary to reset TRZOR. Hi motty, my pleasure to help testing ElectrumFJC! I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem. At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin. I understand is very risky but i needed to try There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor Hi Rw, I fixed the code on the hardware wallet. And I replaced the executable file of the download site. Please download again. I think that connection will be refused by TREZOR this time. (?) I have informed to TREZOR the code to be rewritten of the firmware. Then just wait for Fujicoin to be registered in the firmware.
|
|
|
|
Rw13enlib88
Legendary
Offline
Activity: 2142
Merit: 1025
|
|
July 11, 2017, 02:30:57 AM |
|
My AV is giving security warnings with the links
I've tested it and ledged haven't worked but trezor yes!!! hurra!!
edit: but problems trying to move FJC back to ccex edit2: when I disconnect the trezor, the logo of trezor with the green point is still there
Hi Rw, Thank you for reporting. It was good that Wallet could physically connect with TREZOR. But it is a very dangerous test. Basically it can not be used normally until TRZOR supports Fujicoin. TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin. Then, it is highly likely that the bitcoin wallet in TREZOR is broken. I think that it is necessary to reset TRZOR. Hi motty, my pleasure to help testing ElectrumFJC! I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem. At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin. I understand is very risky but i needed to try There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor Hi Rw, I fixed the code on the hardware wallet. And I replaced the executable file of the download site. Please download again. I think that connection will be refused by TREZOR this time. (?) I have informed to TREZOR the code to be rewritten of the firmware. Then just wait for Fujicoin to be registered in the firmware. Hi motty, I've downloaded and I see the new the new messages For ledger And I still have the TREZOR wallet but i guess is because I already have it done Can you also ask Ledger to include Fuji please? Not sure where the issue/pull request should go, but this is their git https://github.com/LedgerHQbtw, we need more tweets like this, community asking for FJC integration in the new firmware https://twitter.com/Exchangewatch3r/status/883821598406475777
|
|
|
|
motty (OP)
|
|
July 11, 2017, 04:25:37 AM |
|
My AV is giving security warnings with the links
I've tested it and ledged haven't worked but trezor yes!!! hurra!!
edit: but problems trying to move FJC back to ccex edit2: when I disconnect the trezor, the logo of trezor with the green point is still there
Hi Rw, Thank you for reporting. It was good that Wallet could physically connect with TREZOR. But it is a very dangerous test. Basically it can not be used normally until TRZOR supports Fujicoin. TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin. Then, it is highly likely that the bitcoin wallet in TREZOR is broken. I think that it is necessary to reset TRZOR. Hi motty, my pleasure to help testing ElectrumFJC! I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem. At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin. I understand is very risky but i needed to try There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor Hi Rw, I fixed the code on the hardware wallet. And I replaced the executable file of the download site. Please download again. I think that connection will be refused by TREZOR this time. (?) I have informed to TREZOR the code to be rewritten of the firmware. Then just wait for Fujicoin to be registered in the firmware. Hi motty, I've downloaded and I see the new the new messages For ledger And I still have the TREZOR wallet but i guess is because I already have it done Can you also ask Ledger to include Fuji please? Not sure where the issue/pull request should go, but this is their git https://github.com/LedgerHQbtw, we need more tweets like this, community asking for FJC integration in the new firmware https://twitter.com/Exchangewatch3r/status/883821598406475777Hi Rw, I fixed the coin name from "Bitcoin" to "FujiCoin". For example, I think TREZOR is making a DB using the coin number as a key. Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.
|
|
|
|
Rw13enlib88
Legendary
Offline
Activity: 2142
Merit: 1025
|
|
July 11, 2017, 10:20:30 PM |
|
Hi Rw, I fixed the coin name from "Bitcoin" to "FujiCoin". For example, I think TREZOR is making a DB using the coin number as a key. Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being. Hi motty, I have tried with my trezor but it still opens the previous one. I'm gonna wipe out and try again, but I have to move the dust first I've already tried but wallet.trezor.io is showing this message: "The bitcore server doesn't seem to reply. Please select another server."
|
|
|
|
motty (OP)
|
|
July 12, 2017, 12:24:04 AM |
|
Hi Rw, I fixed the coin name from "Bitcoin" to "FujiCoin". For example, I think TREZOR is making a DB using the coin number as a key. Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being. Hi motty, I have tried with my trezor but it still opens the previous one. I'm gonna wipe out and try again, but I have to move the dust first I've already tried but wallet.trezor.io is showing this message: "The bitcore server doesn't seem to reply. Please select another server." Hi Rw, Thank you for the information I understood the content and I will try to fix it.
|
|
|
|
motty (OP)
|
|
July 12, 2017, 08:13:25 AM |
|
Hi Rw, I fixed the coin name from "Bitcoin" to "FujiCoin". For example, I think TREZOR is making a DB using the coin number as a key. Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being. Hi motty, I have tried with my trezor but it still opens the previous one. I'm gonna wipe out and try again, but I have to move the dust first I've already tried but wallet.trezor.io is showing this message: "The bitcore server doesn't seem to reply. Please select another server." Hi Rw, Thank you for the information I understood the content and I will try to fix it. Hi Rw, I reviewed the interface code with TREZOR. Please download again and test.
|
|
|
|
Rw13enlib88
Legendary
Offline
Activity: 2142
Merit: 1025
|
|
July 12, 2017, 04:01:58 PM |
|
Hi motty, I've downloaded and if I try with the previous wallets and if i try to create a new wallet the problem in both cases is that trezor is not recognized (in wallet.trezor.io is working good so it's not trezor's problem) I have tried with another trezor and same problem at creating a new wallet I have tried with Ledger and it's working! but...
|
|
|
|
motty (OP)
|
|
July 12, 2017, 04:33:04 PM |
|
Hi motty, I've downloaded and if I try with the previous wallets and if i try to create a new wallet the problem in both cases is that trezor is not recognized (in wallet.trezor.io is working good so it's not trezor's problem) I have tried with another trezor and same problem at creating a new wallet I have tried with Ledger and it's working! but... This time I reviewed the code provided by each maker of HD-Wallet. https://github.com/fujicoin/electrum-fjc/tree/master/hdmodulesRegarding TREZOR, since coin name and parameters accepting connection are defined in firmware, I think that it is more appropriate not to connect when setting as Fujicoin correctly. In short, it means that you can not connect without faking it. I also reviewed the code for Ledger. The cause of the error is not yet well understood now.
|
|
|
|
Rw13enlib88
Legendary
Offline
Activity: 2142
Merit: 1025
|
|
July 12, 2017, 09:21:37 PM |
|
This time I reviewed the code provided by each maker of HD-Wallet. https://github.com/fujicoin/electrum-fjc/tree/master/hdmodulesRegarding TREZOR, since coin name and parameters accepting connection are defined in firmware, I think that it is more appropriate not to connect when setting as Fujicoin correctly. In short, it means that you can not connect without faking it. I also reviewed the code for Ledger. The cause of the error is not yet well understood now. So bad TREZOR we cannot use it until it's included in the firmware You can ask Ledger dev here: http://slack.ledger.co/They have said in twitter that doubts can be asked https://twitter.com/BTChip/status/884611035277217792I'm gonna research if we can contact Trezor's dev to solve the issue
|
|
|
|
deztroyr1
|
|
July 12, 2017, 09:49:30 PM |
|
good to see the current progress
|
|
|
|
|
MoonWhale
Member
Offline
Activity: 218
Merit: 10
|
|
July 14, 2017, 09:02:27 AM |
|
|
|
|
|
motty (OP)
|
|
July 14, 2017, 09:06:41 AM |
|
Yes, perhaps all Ledgers.
|
|
|
|
|