[ANN] KoreCoin [X13][PoS] | V1.2 - UPDATE | Anonymous going live 27th June

[binaryclock]

i rented on dedicated pool. getting 100% rejects

It's an x13 coin.  Make sure your renter is setup correctly.  I'd raise a ticket with your rental company.

[1715060115]

1715060115

[1715060115]

1715060115

[ocminer]

ocminer - that's odd.  We started off very slowly too... only had 200mh/s for the first 20 mins, then 500mh/s for 60 mins, then it ramped up.  There wasn't any "massive switch on" or anything and I'm using the nodes internal to the wallet.

I think we're all synced now tho!

I've noticed a massive spike in (net) hashrate  according to my logs and after that a massive loss of pool-hashrate... Then it obviously forked..

I've always got the seednodes from OP in my .conf .. did not seem to be enough this time..

At least we're synced now, but it's really hard with you guys in too

[vectisitch]

yes i rented x13

[binaryclock]

ocminer - that's odd.  We started off very slowly too... only had 200mh/s for the first 20 mins, then 500mh/s for 60 mins, then it ramped up.  There wasn't any "massive switch on" or anything and I'm using the nodes internal to the wallet.

I think we're all synced now tho!

I've noticed a massive spike in (net) hashrate  according to my logs and after that a massive loss of pool-hashrate... Then it obviously forked..

I've always got the seednodes from OP in my .conf .. did not seem to be enough this time..

At least we're synced now, but it's really hard with you guys in too

Yes, but I think that spike are PoS blocks.  This wallet is already staking isn't it?

[KoreCoin]

ocminer - that's odd.  We started off very slowly too... only had 200mh/s for the first 20 mins, then 500mh/s for 60 mins, then it ramped up.  There wasn't any "massive switch on" or anything and I'm using the nodes internal to the wallet.

I think we're all synced now tho!

I've noticed a massive spike in (net) hashrate  according to my logs and after that a massive loss of pool-hashrate... Then it obviously forked..

I've always got the seednodes from OP in my .conf .. did not seem to be enough this time..

At least we're synced now, but it's really hard with you guys in too

We have had a massive spike in net hash to upwards of 70gh/s compared to 10gh/s an hour or so ago. We have compensated all lost coins to ocminer to provide to their miners. Everything is looking good now.

If the pool devs or anyone has any other issues let us know!

[zhulick]

ocminer - that's odd.  We started off very slowly too... only had 200mh/s for the first 20 mins, then 500mh/s for 60 mins, then it ramped up.  There wasn't any "massive switch on" or anything and I'm using the nodes internal to the wallet.

I think we're all synced now tho!

can you please check to make sure you're not blocking miningrigrentals somehow...

when nova forked, i jumped over to your pool... was able to mine for a few minutes, but then was bounced and could not reconnect...

this happens occasionally, and only when i use mrr...

[ashour]

On which pool should I mine now

[binaryclock]

ocminer - that's odd.  We started off very slowly too... only had 200mh/s for the first 20 mins, then 500mh/s for 60 mins, then it ramped up.  There wasn't any "massive switch on" or anything and I'm using the nodes internal to the wallet.

I think we're all synced now tho!

I've noticed a massive spike in (net) hashrate  according to my logs and after that a massive loss of pool-hashrate... Then it obviously forked..

I've always got the seednodes from OP in my .conf .. did not seem to be enough this time..

At least we're synced now, but it's really hard with you guys in too

We have had a massive spike in net hash to upwards of 70gh/s compared to 10gh/s an hour or so ago. We have compensated all lost coins to ocminer to provide to their miners. Everything is looking good now.

If the pool devs or anyone has any other issues let us know!

When shibe has PoS blocks at the same time as PoW blocks, sometimes the PoS blocks would make the pools fork.  There was also a large amount of hash on the network when that happened from the PoS blocks.

ocminer, check the block it forked on, see if it was on PoS block.

[ocminer]

ocminer - that's odd.  We started off very slowly too... only had 200mh/s for the first 20 mins, then 500mh/s for 60 mins, then it ramped up.  There wasn't any "massive switch on" or anything and I'm using the nodes internal to the wallet.

I think we're all synced now tho!

I've noticed a massive spike in (net) hashrate  according to my logs and after that a massive loss of pool-hashrate... Then it obviously forked..

I've always got the seednodes from OP in my .conf .. did not seem to be enough this time..

At least we're synced now, but it's really hard with you guys in too

We have had a massive spike in net hash to upwards of 70gh/s compared to 10gh/s an hour or so ago. We have compensated all lost coins to ocminer to provide to their miners. Everything is looking good now.

If the pool devs or anyone has any other issues let us know!

When shibe has PoS blocks at the same time as PoW blocks, sometimes the PoS blocks would make the pools fork.  There was also a large amount of hash on the network when that happened from the PoS blocks.

ocminer, check the block it forked on, see if it was on PoS block.

it was block 812 it forked on, we did not find it, must be an other pool

[ocminer]

On which pool should I mine now

every pool is good now

[KoreCoin]

@Pool devs,

You can use stake=0 in the KoreCoin.conf to stop from mining PoS blocks.

[binaryclock]

@Pool devs,

You can use stake=0 in the KoreCoin.conf to stop from mining PoS blocks.

Yes, i have that set.  My wallet is not staking, but that doesn't stop PoS blocks from entering the blockchain.  Well it didn't on shibe that is!.  Just keep a heads up.

[vectisitch]

must be a problem with dedicated . changed to nova and i'm now hashing

[Koko]

Can't connect to Dedicated for some reason, was mining Pioneercoin then switched to Korecoin and no connection.

[whatdidshedo]

i rented on dedicated pool. getting 100% rejects

Can't connect to Dedicated for some reason, was mining Pioneercoin then switched to Korecoin and no connection.

i had issue with one of my rental moving on dedicated it didn't recognize it, so i'm on suprnova and it works like a charm

[huynhthuan999]

@Pool devs,

You can use stake=0 in the KoreCoin.conf to stop from mining PoS blocks.

What is the stake? Kore why deduct my Balance?

[KoreCoin]

@Pool devs,

You can use stake=0 in the KoreCoin.conf to stop from mining PoS blocks.

What is the stake? Kore why deduct my Balance?

Only pool ops should use stake=0, sorry what happened to your balance?

[ocminer]

Try with updated nodes on front page and try the repairwallet command if there are any problems and let us know!

-ocminer if you could roughly work out how many coins were lost from this and pm us? we will compensate you so you can spread to your workers?

> 500 KORE for me....  

don't worry, i'll payout all the blocks

wow thx, i'll set donations 

thx, almost all blocks have been payed out, waiting for the donation from the devs and I'll payout the rest too, i hope i'm not loosing all miners to dedicated, half is already gone...

you are not loosing me i'm staying since i just noticed it , no point to switch now cause you fixed it

thx, all blocks have been set to confirmed now, so you all did not loose 1 coin.

Thanks & Props to the Kore dev !

while you're fiddling around with the pool, is it possible for you to tweak the vardiff a bit ?

nova has a tendency to crank up the vardiff a bit too high... this often chokes my rigs as my workers often do not get a fighting chance to submit work before a block is found...

as an example, dedicated typically keeps my rigs at a vardiff of .06-.08... nova keeps me at .256... here is what my rigs look like mining nova - https://www.miningrigrentals.com/rigs/1784

the hashrate is all over the place... i know this is not abnormal or anything, but when i mine on dedicated it looks nothing like that, and pretty much stays at a solid straight line...

now that the difficulty is a bit higher it's actually not so bad, but earlier when the diff was between 50-100, there were long stretches where all i saw line after line of "block found", with my workers never getting a chance to submit work... if the vardiff was a bit lower, they would have a shot...

so again, if you get a chance, can you please tweak the vardiff a bit ?

thanks for your heads up, i'll check that and tweak it accordingly

[ashour]

When will the coin be on an exchange ? Or Im I just wasting hashing power

[ocminer]

@Pool devs,

You can use stake=0 in the KoreCoin.conf to stop from mining PoS blocks.

added this now