[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

how can I remove the uploaded miners (to hosts) easily?

I found 2 locations

C:\Users\Administrator\AppData\Roaming\AwesomeMinerService
C:\Users\Administrator\AppData\Local\AwesomeMinerService\UploadedSoftware

The easiest way is to do it via the list of miners in the Awesome Miner main application. Please right click on a miner and select System Tools -> Cleanup of all downloaded and uploaded mining software.

[1715114935]

1715114935

[1715114935]

1715114935

[patrike]

how can I remove the uploaded miners (to hosts) easily?

I found 2 locations

C:\Users\Administrator\AppData\Roaming\AwesomeMinerService
C:\Users\Administrator\AppData\Local\AwesomeMinerService\UploadedSoftware

The easiest way is to do it via the list of miners in the Awesome Miner main application. Please right click on a miner and select System Tools -> Cleanup of all downloaded and uploaded mining software.

but it's delete  all of them including the latest of all miner that's using too? 

It's correct that it will remove all mining software. However, if you do this while the Remote Agent isn't mining, and then you start it again, it will re-download the mining software it needs. The result will be that all non-used and all uploaded mining software will be gone.

An alternative if you only want to remove the uploaded mining software would be to use System Tools -> Execute Remote Command, where you use a command line for removing a specific folder.

[citronick]

Patrike -- any plans to support FPGA miners like Blackminer F1s ?

[patrike]

Patrike -- any plans to support FPGA miners like Blackminer F1s ?

Thanks for your question. Blackminer F1 is already supported by Awesome Miner. There are a few users running this FPGA miner together with Awesome Miner.

I don't have any first hand experience in setting up this miner myself. It could be that you need to enable the monitoring API via the web interface of this miner before you can access it via Awesome Miner.

[STSMiner]

Patrike -- any plans to support FPGA miners like Blackminer F1s ?

Thanks for your question. Blackminer F1 is already supported by Awesome Miner. There are a few users running this FPGA miner together with Awesome Miner.

I don't have any first hand experience in setting up this miner myself. It could be that you need to enable the monitoring API via the web interface of this miner before you can access it via Awesome Miner.

Patrike,

I've sent you a private message on this .... I have an issue getting mine to work.

[patrike]

Awesome Miner version 7.1.7 (Development preview of 7.2)

 GPU mining
  - Introducing an easier way to save entire GPU Clocking Profile Groups, either as default profile for a miner or as a separate profile group. The feature can be access via the GPU Clocking tab for the selected miner.
  - Save current Managed Miner settings to a Managed Template. The feature can be accessed via the context menu for a Managed Miner
 Features
  - Execute Awesome Miner rules via command line parameters, for easier integration with script languages
 Mining software
  - Gminer 1.79
  - XmRig 5.0.1
  - NbMiner 26.2
  - Lolminer 0.9
  - TeamRedMiner 0.6.0
  - TT-Miner 3.1.1
  - CpuMiner-Opt 3.9.10
  - Phoenix Miner 4.8c
 Changes
  - Remove support for the old web interface
  - By specifying the property ALLCOINS with value 0 for Claymore Ethereum Miner configuration file, Awesome Miner will not add the allcoins flag to the command line
 Corrections
  - Correction to Prohashing.com integration to include a few missing pools

[narousberg]

Hi Boss
can you create small elements for this lists:
  GPU clocking profile;
  Profit Profile;
please add to this lists column sorting feature.

Any chance that we get functionality to export/import of "Profit profiles" ? I understand, that is not easy due database structure. Maybe you can create some tool, which created new database entries in destination database and so import can be done.

Regards

[narousberg]

patrike, can you add power limit override function to Profit profile?
where with this new power setting all GPU power parameters for all algoritms will be override, only in this concrete profit profile.
At the moment i need create a new "profit profile" if i want create profile with 75% power, another one if i want 80% and so on...

and later you can improve rule section with this new function "override profile power settings" ....

Regards

[patrike]

Hi Boss
can you create small elements for this lists:
  GPU clocking profile;
  Profit Profile;
please add to this lists column sorting feature.

Any chance that we get functionality to export/import of "Profit profiles" ? I understand, that is not easy due database structure. Maybe you can create some tool, which created new database entries in destination database and so import can be done.

Regards

The next development release will have a few changes to these lists in the Options dialog. For GPU Clocking Profiles, I've not yet made the changes as I also need to find a way to fit all details - maybe using "PL" for "Power Limit" and so on.

patrike, can you add power limit override function to Profit profile?

Thanks for all other suggestions as well

[patrike]

Awesome Miner version 7.1.8 (Development preview of 7.2)

 GPU mining
  - Benchmark dialog will show preliminary hashrate during the benchmark
 CPU mining
  - CPU temperature and frequency can be displayed even if Awesome Miner or Remote Agent isn't running with Administrator privileges
  - CPU temperature is displayed in the miner list in the same way as for GPU and ASIC miners
  - CPU temperature is displayed for each CPU in the CPU tab for the selected miner
  - Improved support for reading the temperature for AMD Ryzen
 User interface
  - The list of configurable items are now displayed with multiple columns in the Options dialog for Managed Templates, Clocking Profile Groups, Profit Profiles and Profit Profile Groups.
 Mining software
  - Gminer 1.81
  - CpuMiner-Opt 3.9.11
  - Lolminer 0.9.1
 Corrections
  - Correction to profit switcher for External Miners running the Awesome Miner firmware

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

[patrike]

Update on Awesome Miner Antminer firmware

Our web site has been updated about the custom firmware we provide for Antminers. Currently supported Antminers:

• Antminer S9, S9i, S9j
• Antminer T9+
• Antminer L3+
• Antminer S17, S17 Pro
• Antminer T17

Antminer S9k, S9SE and S17e will be supported in the near future.

On average an hashrate performance increase of 10%+ can be expected for Antminer S9 and 40%+ for Antminer S17.

Unlock and installation
Awesome Miner can automatically unlock Antminers (where SSH is disabled and signature check is enforced) in order to install the firmware. The unlock and automatic installation is supported on all Antminers listed above with the only exceptions being:

• Antminer S9 running Bitmain firmware from July 2019 - requires SD-card to install
• Antminer L3+ running Bitmain firmware from July 2019 - requires SD-card to install

Awesome Miner for free
The firmware has a mining fee of either 2% or 3%. The firmware editions with a 3% mining fee includes an Awesome Miner license and doesn't consume any of the licenses available in Awesome Miner. This makes it possible to run Awesome Miner with all features and with any numbers of miners without paying anything for the license - as long as the firmware with a 3% mining fee is being used.

More information
For more details about the firmware, please see:
https://www.awesomeminer.com/antminerfirmware

[bjbitcoin]

Anybody mining with the OW1 ASIC?  I can't find much information about it.

[patrike]

Anybody mining with the OW1 ASIC?  I can't find much information about it.

I don't have any experience with this miner myself, but I do know there are some Awesome Miner users running it together with Awesome Miner.

Maybe someone else here have more experience?

[patrike]

Awesome Miner version 7.2

 ASIC mining
  - Made it easier to unlock Antminers in a unified way, with support for S9, T9+, S15, T15, S17, S17 Pro, T17. (S9 and T9+ cannot be unlocked if running the Bitmain July 2019 firmware).
 GPU mining
  - Introducing an easier way to save entire GPU Clocking Profile Groups, either as default profile for a miner or as a separate profile group. The feature can be access via the GPU Clocking tab for the selected miner.
  - Save current Managed Miner settings to a Managed Template. The feature can be accessed via the context menu for a Managed Miner
  - Benchmark dialog will show preliminary hashrate during the benchmark
 CPU mining
  - CPU temperature and frequency can be displayed even if Awesome Miner or Remote Agent isn't running with Administrator privileges
  - CPU temperature is displayed in the miner list in the same way as for GPU and ASIC miners
  - CPU temperature is displayed for each CPU in the CPU tab for the selected miner
  - Improved support for reading the temperature for AMD Ryzen
 Features
  - Execute Awesome Miner rules via command line parameters, for easier integration with script languages
 User interface
  - The list of configurable items are now displayed with multiple columns in the Options dialog for Managed Templates, Clocking Profiles, Clocking Profile Groups, Profit Profiles and Profit Profile Groups.
 Mining software
  - XmRig 5.0.1
  - NbMiner 26.2
  - TeamRedMiner 0.6.0
  - TT-Miner 3.1.1
  - Phoenix Miner 4.8c
  - Gminer 1.81
  - CpuMiner-Opt 3.9.11
  - Lolminer 0.9.1
 Changes
  - Remove support for the old web interface
  - By specifying the property ALLCOINS with value 0 for Claymore Ethereum Miner configuration file, Awesome Miner will not add the allcoins flag to the command line
 Corrections
  - Correction to profit switcher for External Miners running the Awesome Miner firmware
  - Correction to Prohashing.com integration to include a few missing pools

[GEBucky]

Has anyone configured Bminer with f2pool on Grin31? I think I have tried every configuration I can think of in AM. Gminer works great. But would love to try Bminer. Thanks

[narousberg]

Hi boss
 big thanks for features in last update.
 can you add in benchmark: max reached value of hashrate during benchmark. No need to save in profile, only for information, than user know when benchmark can be stoped.
 can you add colors to miner hashrate value. If actual value less then saved value in profile, color go to the red color zone , if more then saved in profile then go in green color zone. In this case user can quick see if something wrong with miner or profile can be better optimized.

Regards
 

[tf2addict]

Is profit calculation for Monero RandomX working?  I'm showing $0.00 per day with 3kH/s.  I tried overriding the coin algorithm under the Statistics Providers settings but it didn't help.

[Chevy_Roadster]

Hi Patrike can you please add Nicehash RandomX in the next release.  Thanks in advance 😎

[GKumaran]

Hey, need better profit/data/api for sub 1 satoshi coins

[patrike]

Has anyone configured Bminer with f2pool on Grin31? I think I have tried every configuration I can think of in AM. Gminer works great. But would love to try Bminer. Thanks

If the exact same pool parameters works fine on Gminer, but fails on Bminer, it might be some incompatibilty issue related to Bminer you run into here. Please also note that Gminer is frequently updated with new releases while Bminer hasn't been updated for quite a while now.