[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

www.awesomeminer.com

GPU MINING

	Native overclocking Use the Native overclocking to control the clock speed, voltage, power and fan               properties of your GPU's. Awesome Miner provides the unique feature of performing overclocking operations for both AMD and nVidia GPU's without using any external applications. In addition to the native overclocking feature, clocking can also be performed via remote control of MSI Afterburner. The overclocking can automatically be applied at a large scale across an entire mining farm based on the current mining algorithm.	Profit switching The Profit switching feature will optimize the mining for maximum profitability               based on statistics from both standard mining pools and multi-coin pools. Access all popular mining pools with just a click to get started with the profit based mining right away. Use the benchmark to let Awesome Miner test multiple mining algorithms and mining software and measure the hashrate and power usage for each of them to optimize the profit switching decisions.
	Power consumption The current Power consumption is displayed for both AMD and nVidia GPU's, independent of which mining software being used. The mining profit is calculated and displayed in real time based on the current power consumption, hashrate and the current mining pool.	Any crypto currency, Any software Includes support for over 40 of the most popular mining software. Several hundred crypto currencies are included with statistics and revenue information. Full flexibility to add and deploy any custom mining software, algorithm, crypto currency and mining pool.
	GPU monitoring Display and monitor GPU properties including clock speed, fan speed, power consumption and temperature. Define actions to take in case a GPU is failing or running too warm.	Windows and Linux Manage and monitor GPU miners running on either Windows or Linux. Awesome Miner Remote Agent supports both platforms.

ASIC MINING

	ASIC support Manage and monitor all popular ASIC devices without installing any software on the         device. Use profit switching on ASIC miners to prioritize mining on the most profitable pool. Supported ASIC miners includes, but are not limited to: Bitmain Antminer, Baikal, Canaan Avalon, DragonMint, Hyperbit, iBeLink, Innosilicon, Obelisk and Whatsminer.	Antminer Bitmain Antminer is a popular ASIC miner and all Antminer models are fully                   supported, including features for automatic configuration of Privileged API access, firmware upgrades and configuration of default pools.
	Automation and SSH Automate the mining operations by defining triggers and macros where the ASIC miner can be instructed to perform operations like changing mining pool or rebooting the ASIC miner. Any SSH command can be sent to an ASIC miner, for example to force a reboot or shudown.	Optimized Antminer firmware Use the optimized Antminer firmware to get significant hashrate improvements and more features. The firmware supports display of power usage, LED flash, sleep mode, antivirus scan and multiple predefined hashrate modes. All these features are integrated in Awesome Miner. Supports Antminer S9, S9i, S9j, T9+, L3+, S17, S17 Pro, T17 Awesome Miner can also interact with the open source Antminer firmware provided by Braiins-OS

FEATURES

	Notifications and Recovery Use the predefined rules or define custom rules to take full control of the mining             operations. Detection of high temperatures, slow mining progress, hanging miners and disconnected miners. Automatic restart of miners, with fully customizable triggers and actions. Define custom rules to automate tasks and setup schedules. Notifications are displayed in the user interface and can also be sent by e-mail or web hooks. With a Cloud Services subscription also as Telegram App notifications and SMS messages.	API Use the HTTP API to interact with Awesome Miner from external applications and           get access to monitoring information about the miners. Use the API to provision and control the mining via external applications. Use the powerful built-in C# script engine to create customized triggers and actions. Develop custom C# scripts for monitoring and performing mining and pool operations.
	Dashboard & Mining history The dashboard gives an overview of all running miners and their total performance, revenue, profit and power consumption. View long-term mining history, generate charts and export CSV-data to Excel for even more powerful data processing and visualization.	Organize miners Organize your miners using miner groups to make management of larger number of miners easier. Operations can be performed either on individual miners or on one or many groups of miners. Define and assign tags to miners to filter and make it easier to identify properties of a miner.
	Templates Use templates to apply a predefined configuration to one or many miners in a single operation.	Balance monitoring Monitor your assests using Coin wallet balance feature and the Pool balance feature for the most popular mining pools.

ANTMINER FIRMWARE




The custom firmware improves the hashrate performance, increases the power efficiency and provides more features.
Use Awesome Miner for free when running the firmware with a 3% mining fee

Getting started
Frequently Asked Questions
Getting started with Awesome Miner
Getting started with Profit Switching
Custom Antminer firmware
Automatic setup of API access for Antminer

Awesome Miner Affiliate Program
By joining the Awesome Miner Affiliate Program, you can earn a commission when you refer new customers to Awesome Miner. A commission of up to 12 % will be paid for each sale.
Read more about the affiliate program

Help
Frequently Asked Questions and Help topics

About
Awesome Miner is available in both Free and Paid editions. The Free edition includes many of the features.
No signup required to get started.

Download and read more on the Awesome Miner web site

Please try the software and give feedback about what kind of functionality you would like to see in the next version. All comments and suggestions are welcome. The goal is to make mining easier and also provide powerful features to manage the mining.

Thanks!
Patrik Engström - IntelliBreeze Software AB
Twitter: @AwesomeMinerApp
Web site: www.awesomeminer.com

[1621260911]

1621260911

[1621260911]

1621260911

[1621260911]

1621260911

[1621260911]

1621260911

[1621260911]

1621260911

[1621260911]

1621260911

[patrike]

Changelog

Version 8.4.6 (2021-04-30)
 Features
  - Remote Agent includes both English and Russian language. The language can be changed via the Remote Agent context menu.
  - New status filter to only show enabled miners
  - New property filter for miner group name
  - Added additional wallet balance units
 Changes
  - When selecting miner groups, only consider visible miners for the groups, not those hidden by filters
  - Optimized CPU usage and bandwidth usage for built-in web server
 Mining software
  - TeamRedMiner 0.8.2
  - XmRig 6.12.1
  - Gminer 2.54
  - RhMiner 2.3b
  - Nanominer 3.3.5

Version 8.4.5 (2021-04-20)
 Features
  - Telegram notifications can be sent to specific Telegram groups, making it easier to make the messages available to more users
 User interface
  - Miner group name will be displayed in the list of notifications
  - Keyboard shortcuts for navigating between the tabs in the Awesome Miner main window. Ctrl+Tab for changing to the next tab and Ctrl+Shift+Tab for changing to the previous tab.
 Changes
  - Increase the maximum number of rows for heat maps
  - Permanently removed Blazepool
 Mining software
  - T-Rex miner 0.20.1
  - SrbMiner-Multi 0.7.3
  - Gminer 2.53
 Corrections
  - Correction to processing of the Mining Pool Hub API response, to handle any incomplete data better

Version 8.4.4 (2021-04-14)
 Features
  - CSV file export from Mining History
 Changes
  - Save heat map configuration for where to expand the map (top/left or bottom/right)
  - Reduce bandwidth usage for local web server
 Mining software
  - Lolminer 1.26

Version 8.4.3 (2021-04-13)
 ASIC mining
  - Added support for Goldshell ASIC miners
  - Improve detection of Innosilicon ASICs
  - Improve detection of Whatsminer ASICs
 Features
  - Mining history will keep track of the miner power usage over time
  - Heat maps can be configured for automatic sorting of miners by IP address
  - The trigger for dead device detection has been improved to detect failed Antminer hash boards
 Mining software
  - Gminer 2.51
  - XmRig 6.11.2
  - T-Rex miner 0.20.0
  - SrbMiner-Multi 0.7.2
 Corrections
  - Correction to a scenario where the web proxy feature could cause a crash of Remote Proxy
  - Correction to Nanopool ERG coin balance

Version 8.4.2 (2021-04-09)
 ASIC mining
  - Whatsminer hashrate display will use the 1 minute average value by default, as it's a more realistic representation of the current hashrate
  - Whatsminer M32s supported
  - Avalon 1246 support improved
  - Innosilicon Scrypt miner support improved
 GPU mining
  - Easier to find the GPU to overclock by allowing double click on a GPU in the GPU tab to switch to the GPU clocking tab
 Features
  - New hashrate trend trigger for comparing the average hashrate of the last hours to the average hashrate over the last 6 days
 Mining software
  - Gminer 2.50
  - Nanominer 3.3.4
  - XmRig 6.11.1
  - Lolminer 1.25
  - Miniz Miner 1.7x3
  - CpuMiner-Opt 3.16.2
 Corrections
  - Correction to GPU selection for Phoenix Miner when selecting a single GPU with index 10 or above.

Version 8.4.1 (2021-04-01)
 Mining software
  - Gminer 2.49
  - T-Rex miner 0.19.14
 Corrections
  - Correction to the heatmap feature to automatically add miners
  - Correction to the web based operation for moving miners to a group while a filter is active
  - Correction to GPU selection for disconnected Managed Miners

Version 8.4 (2021-03-26)
 GPU mining
  - GPU overclocking for AMD 6000-series. Note: Memory clocking may be restricted in the same way as it's restricted using the official tools from AMD
  - Improved GPU selection for Managed Miners and Managed Profit Miners, where the last know set of GPUs are listed for disconnected miners.
  - Notifications improved to include more details about the GPU causing the rule to trigger. (For triggers related to a specific device)
 Features
  - New tab for Remote Proxy miner discovery details (used for large scale mining operations only)
  - Miner group view can display the lowest miner temperature, configurable in the Options dialog, General section
 Mining software
  - Gminer 2.48
  - TeamRedMiner 0.8.1.1
  - SrbMiner-Multi 0.7.1
  - NbMiner 37.1
  - Nanominer 3.3.2
  - T-Rex miner 0.19.12
  - CpuMiner-Opt 3.16.1
  - XmRig 6.10
 Corrections
  - Correction to Antminer S9k and S9SE ASIC chip temperature reading
  - Corrections to Remote Proxy
  - Correction to a profit switching scenario with Phoenix Miner
  - The web based miner group view will use the global setting for chip temperature display, similar to the Windows application
  - Correction to a scenario related to nVidia GPUs that could cause memory leaks. Note that nVidia drivers 460.x and 461.x have an internal memory leak as well, causing any process that monitors power usage to leak memory.
  - Correction to Telegram messages for additional users included in the default Administrator user group
  - Correction to a scenario where the same API port could be assigned to two Managed Miners

Version 8.3.3 (2021-03-08)
 GPU mining
  - Improved overclocking support for AMD Radeon VII on Linux. Note: Any existing Clocking Profiles for Radeon VII on Linux must be updated after the upgrade.
  - Improved compatibility for reading AMD GPU information on Linux
 User interface
  - Columns in the Miners tab can be hidden via the toolbar Appearance, Columns button.
 Mining software
  - Gminer 2.46
 Corrections
  - Correction to serialization of specific pool types sent to Remote Agent on Linux
  - Correction to the rule for detecting miners not hashing correctly

Version 8.3.2 (2021-03-05)
 ASIC mining
  - LED flash for Antminer Z15
 GPU mining
  - Improved reading of AMD GPU information display on Linux
 Features
  - Improved performance when executing commands on a large number of miners
  - Added new predefined rule to make it easier to detect and reboot miners not hashing correctly
 User interface
  - The Profit Profile Properties dialog can be resized to better display all GPU clocking configuration
  - Use blue color in the heat map to illustrate miners with minus degree temperature
  - The page titles of the web interface will include the name of the selected page, group or miner
 Mining software
  - SrbMiner-Multi 0.6.9
 Corrections
  - Correction to Nicehash region when using the Excavator mining software
  - Removed pools (not intended for the profit switcher) from the profit switcher configuration

Version 8.3.1 (2021-03-01)
 GPU mining
  - Easier to both apply and save the overclocking for a specific miner
  - Allow lower voltage to be set for AMD 5000-series on Linux
  - Added additional coin images
 Features
  - A Remote Proxy (used for large scale mining operations) can be configured to act as a web proxy
 Integration
  - Nicehash pool regions updated. NOTE: If you use Nicehash mining, please ensure the closest region is selected in the Options dialog, Profit switching section, after the upgrade.
 Mining software
  - SrbMiner Multi 0.6.8
 Corrections
  - Correction to display of Nicehash balance for external addresses
  - Correction to log rotation of Remote Agent and Remote Proxy
  - Correction to Remote Proxy automatic miner discovery based on the IP range syntax
  - Correction to a profit switching scenario if a miner recently was converted from a Managed Miner to a Managed Profit Miner

Version 8.3 (2021-02-23)
 User interface
  - New Awesome Miner logo
 Features
  - Open ASIC miner configuration page via the Awesome Miner web interface
  - Heat map boxes in web interface will automatically resize to a bit smaller size for larger heatmaps
 Integration
  - Display of revenue when mining on HiveOn pool
 Mining software
  - Gminer 2.45
  - XmRig 6.9

Version 8.2.7 (2021-02-17)
 ASIC mining
  - StrongU ASIC miners officially supported
 Features
  - When application authentication is enabled, ask for credentials again when restoring from system tray (notification area).
  - Heatmaps can be configured to automatically add miners
  - Updated Russian translation
 Mining software
  - Nanominer 3.2.2
  - T-Rex miner 0.19.11
  - CpuMiner-Opt 3.15.6
  - XmRig 6.8.2
  - SrbMiner-Multi 0.6.7
 Corrections
  - Correction to applying Clocking Profile Groups

Version 8.2.6 (2021-02-11)
 CPU mining
  - Display temperature for Ryzen 5000 series CPU
 Features
  - Introducing a concept of a secondary coin for pools, intended for merge-mining scenarios, where the pool revenue will be based on the income from two different coins
  - Per GPU power usage display in the web interface
 Integration
  - Binance.US supported for Exchange Balance
  - Updated Mining Pool Hub pool list
 Mining software
  - SrbMiner 0.6.6
  - Nanominer 3.2.1
  - T-Rex 0.19.10, including improved GPU mapping based on new PciBusID property
 Corrections
  - Correction to display of PciBusID when using the manual GPU mapping feature

Version 8.2.5 (2021-02-05)
 ASIC mining
  - Whatsminer specific properties can be configured via the ASIC Tools menu
  - Improved compatibility with Whatsminer firmware version 1.3 (January 2021)
 Features
  - Miner graph improved to display Power usage, Revenue per day and Profit per day
  - Heat maps can be defined with a larger maximum size
 Mining software
  - SrbMiner Multi 0.6.5
  - XmRig 6.8.1
  - TeamRedMiner 0.8.1
  - Lolminer 1.21, including use of the new watchdog feature
 Corrections
  - Correction to nVidia GPU clocking on Linux

Version 8.2.4 (2021-01-27)
 ASIC mining
  - The operations for LED flash and miner sleep mode will show a progress dialog to indicate the result of these operations
 Features
  - New rule trigger Device Profile for detecting GPU core clock or GPU memory clock
 Mining software
  - XmRig 6.8
  - Lolminer 1.20
  - Gminer 2.44
  - PhoenixMiner 5.5c
 Corrections
  - Corrections to communication interface for Remote Agent on Linux

Version 8.2.3 (2021-01-22)
 Features
  - Operation to move a miner to a group made available to the miner specific page in the web interface
 Integration
  - Updated Mining Pool Hub pool list
 Mining software
  - Excavator 1.6 supported. Requires manual download
  - Bminer 16.4.5
  - TeamRedMiner 0.8.0
  - T-Rex miner 0.19.9
 Corrections
  - Correction to use HTTPS for a few additional coin related API sources
  - Correction to scrolling in a long list of miner groups in the web interface

Version 8.2.2 (2021-01-15)
 Mining software
  - Gminer 2.42
  - XmRig 6.7.2
 Corrections
  - Correction to Profit Profile configuration of delayed GPU clocking profile
  - Correction to Antminer diagnostics feature to use custom SSH port if configured

Version 8.2.1 (2021-01-13)
 GPU mining
  - GPU clocking can be set with a delay when a miner is started. Configurable per miner and per algorithm in the Profit Profile.
 Features
  - Telegram messages can be sent to additional user accounts if given permissions on the User Group
  - Device Hashrate trigger improved with more configuration options
 Integration
  - Additional pool balance support for Ethermine and Flypool
 Mining software
  - Lolminer 1.19
  - Gminer 2.41
  - CryptoDredge 0.26.0
  - T-Rex 0.19.7
  - NbMiner 36.1
  - XmRig 6.7.1
  - Nanominer 3.1.5
  - SrbMiner Multi 0.6.3
 Corrections
  - Correction to sorting of the Information column

Version 8.2 (2021-01-06)
 ASIC mining
  - Improved API compatibility with custom Antminer firmware
 GPU mining
  - Managed Software (in the Options dialog) can be customized for Linux
 Features
  - Show hashrate and temperature graph in the details panel for the selected miner
  - Introducing the concept of Quick Access Toolbar, where you can right click on almost any toolbar button or sub menu item in the main window and add it to the Quick Access Toolbar. The command will show up as a separate button in the top left corner of the main window.
  - The highlight colors currently named Information 1, Information 2 and so on can be given a user defined description. To define a description, use the 'Rename' menu item in the Highlight Miners or Highlight Groups toolbar buttons.
  - The Information column can be configured to display the hashrate of each individual device for a miner
  - The profit switching setting for minimum time to say on a pool can now be configured for up to 999 minutes.
  - Led flash support for Antminer S15, T15, S17 and T17 running Bitmain firmware
 Integration
  - Ethermine pool balance
 Improvements
  - Improved sorting for the Information column
  - Updated default list of mining software for AMD and nVidia Profit Profiles
 Mining software
  - SrbMiner 0.6.2
  - Gminer 2.40
  - XmRig 6.7
  - T-Rex miner 0.19.5
  - NbMiner 36.0
  - Bminer 16.4.2
  - TeamRedMiner 0.7.22
  - CpuMiner-Opt 3.15.5
  - PhoenixMiner 5.4c
  - Lolminer 1.17
 Corrections
  - Correction to the link to the Nicehash web site
  - Correction to Nanominer VerusHash device reporting
  - Changed timeout for reboot of Antminer S19
  - Correction to AMD RX 5000 series overclocking on Linux

Version 8.1.13 (2020-12-14)
 Mining software
  - T-Rex miner 0.19.4
  - TeamRedMiner 0.7.20
  - Gminer 2.34
  - WildRig miner 0.28.2
  - SrbMiner Multi 0.5.9
  - NbMiner 35.0
  - Miniz Miner 1.6x, updated download link for Linux
 Corrections
  - Correction to launching recent versions of T-Rex miner on Linux

Version 8.1.12 (2020-12-11)
 GPU mining
  - Reading the nVidia fan speed is supported with the latest nVidia driver (v460.79). Note: A number of mining software isn't fully compatible with the latest nVidia drivers yet, please wait with upgrading the nVidia drivers if possible.
 Features
  - Miner Group summary can be configured for multiple additional properties to display. Configurable in the Options dialog, General section
  - Miner Group summary can be configured to display the 24 hour average hashrate for the miners
 Mining software
  - TeamRedMiner 0.7.19
  - Nanominer 3.1.4
  - T-Rex miner 0.19.3
  - CpuMiner-Opt 3.15.3
  - Miniz Miner 1.6x, including improved integration by displaying hashrate with decimals

Version 8.1.11 (2020-12-07)
 Integration
  - More balance units for wallet balance feature
 Mining software
  - NbMiner 34.5
  - Nanominer 3.1.3
  - T-rex miner 0.19.1
  - XmRig 6.6.2
  - SrbMiner Multi 0.5.8, with improved integration for displaying console output when running in administrator mode
  - Miniz Miner, improved integration for displaying console output when running in administrator mode
  - Lolminer API integration improved for External Miners
 Corrections
  - Improved AMD GPU detection on Linux
  - Improved connection management for Remote Agent on Linux. Note: The Test Connection and Network Scan operations will require Remote Agent to also be upgraded to the latest version.

Version 8.1.10 (2020-11-28)
 Integration
  - Nicehash Octopus pool added
 Mining software
  - PhoenixMiner 5.3b including EtcHash support for Ethereum Classic fork
  - Nanominer 3.1.2
  - Gminer 2.33
  - XmRig 6.6.1
  - SrbMiner Multi 0.5.7

Version 8.1.9 (2020-11-25)
 ASIC mining
  - Operations to pause mining and resume mining supports Bitmain firmware for Antminer S15/T15 and S17/T17
  - Detection of Canaan Avalon 11-series miners and more exact detection of Avalon ASIC miners in general
  - Display firmware version for more ASIC models on the Summary tab for the selected miner
  - Improved hashrate display compatibility with custom Antminer Z11 firmware by FuddWare
 Mining software
  - Lolminer 1.16
  - XmRig 6.6
  - Nanominer 3.1.1
  - T-Rex miner 0.18.11
  - NbMiner 33.8
  - SrbMiner 0.5.6
  - TeamRedMiner 0.7.18
  - PhoenixMiner 5.2e
 Corrections
  - Correction to setting Power mode (Work mode) for Antminer S17+
  - Correction to license allocation for External Miners being changed to Disabled state

Version 8.1.8 (2020-11-20)
 CPU mining
  - Improved display of power usage for CPU mining
 Features
  - Connection to Remote Agent can be tested via the Managed Miner Properties
 Mining software
  - Nanominer 3.1
  - T-Rex miner 0.18.10
 Corrections
  - Improved EthMiner API compatibility

Version 8.1.7 (2020-11-19)
 ASIC mining
  - Configuration of Power mode (Work mode) for Antminers running Bitmain firmware for S15/T15 and S17/T17
 Features
  - Trigger for Miner State can be configured with a duration the miner must be in the specific state before triggered
  - Notes can be added to Miner groups
  - Improved selection of Mining software to use based on detected nVidia CUDA version available
  - Feature to send a ping request to a Remote Agent process and display the response time (toolbar: Tools -> System Tools -> Ping)
 Mining software
  - Nanominer 3.0.1
  - Gminer 2.30
  - T-rex miner 0.18.9, incl. use of new worker ID parameter
  - PhoenixMiner 5.2d
  - Miniz Miner 1.6w2
  - CpuMiner-Opt 3.15.2
  - Bminer 16.3.6
  - NbMiner 33.4
  - LolMiner 1.15
  - XmRig 6.5.3
 Corrections
  - Correction to AMD Ryzen temperature display
  - Correction to detection of AMD GPU memory on Linux
  - Correction to AMD GPU name display on Linux
  - Correction to display of coin value in the status bar for coins with only a USD value

Version 8.1.6 (2020-11-06)
 GPU mining
  - Linux GPU mining: The AMD GPU model name will be displayed more exactly (like 'Radeon RX 5700XT' instead of 'Radeon RX 5600/5700/5700XT'). Please check any GPU clocking rules based on device name after the upgrade.
 Features
  - Web interface includes the operation to Enable or Disable an External Miner
 User interface
  - Organize rule actions with group labels to make it easier to find
 Mining software
  - Bminer 16.3.4
  - NbMiner 33.3
  - SrbMiner 0.5.5
  - TT-miner 6.0
  - TeamRedMiner 0.7.17
 Corrections
  - Correction to GPU mapping for T-Rex miner
  - Correction to API processing for EthMiner
  - Correction to display of Core Voltage Limit for GPU Clocking Profiles in the Options dialog

Version 8.1.5 (2020-10-30)
 GPU mining
  - Added the EtcHash algorithm to support the upcoming changes for Ethereum Classic
 CPU mining
  - Improved detection of number of cores for AMD Ryzen
 Mining software
  - Lolminer 1.12
  - Nanominer 1.12
 Corrections
  - Correction to Ryzen temperature display

Version 8.1.4 (2020-10-29)
 GPU mining
  - Improved clocking and voltage support for older AMD GPUs on Linux
  - Display of voltage for more kinds of AMD GPUs on Linux
  - GPU Clocking Groups can be configured to match multiple mapping conditions per GPU
  - Support for selecting and detecting nVidia CUDA version 11.1
 CPU mining
  - Update library for reading CPU information to improve temperature reading support for Ryzen CPUs
 Features
  - Trigger for checking pool shares and hardware errors in percent has been improved to also check for a specific number of hardware errors
  - Easier to edit GPU Clocking Profiles via the GPU Clocking tab
 Integration
  - Wallet balance for SiaPrime (SCP)
 Mining software
  - TeamRedMiner 0.7.16c
  - NbMiner 33.1
  - T-Rex miner 0.18.5
 Corrections
  - Correction to MAC address reading from Whatsminer ASIC

Version 8.1.3 (2020-10-20)
 GPU mining
  - Improved support for overclocking of AMD Radeon RX 5000-series on Linux
  - Improved auto start procedure for Managed Miners after reboot
 Features
  - External Miner API endpoint includes MAC address
 User interface
  - Managed Miner configuration for Device Profile moved to the Advanced section as it not used very often
 Mining software
  - TeamRedMiner 0.7.14
  - Lolminer 1.11, including correction in Awesome Miner for Ethereum hashrate display
  - XmRig 6.4
  - Gminer 2.29
  - T-Rex Miner 0.18.2
 Corrections
  - Correction to the display of usage in "Time" in the Mining History dialog

Version 8.1.2 (2020-10-13)
 ASIC mining
  - Improved compatibility with Antminers running custom firmware
 Features
  - Improved variable support for command line arguments
 Mining software
  - Gminer 2.28
  - SrbMiner 0.5.4
  - T-rex Miner 0.18.1
 Corrections
  - Correction to ASIC pool operations over the Cgminer API

Version 8.1.1 (2020-10-08)
 ASIC mining
  - Whatsminer integration improved to display fan speed and power usage
  - Improved Avalon support when using multiple miners per controller to handle the case if the Avalon controller reports the same miner twice
 Features
  - Improved Device Count trigger to allow additional compare operations
  - Miner status API includes MAC address of miner
 Changes
  - Improved processing of miner commands
 Mining software
  - TeamRedMiner 0.7.13
  - SrbMiner 0.5.3
  - NbMiner 32.1
  - XmRig 6.3.5
  - CpuMiner-Opt 3.15.0
  - Lolminer 1.10
  - WildRig 0.28.0
  - Gminer 2.27
  - Miniz Miner 1.6w
 Corrections
  - Correction to execution of batch commands configurable per algorithm in a Profit Profile

Version 8.1 (2020-10-01)
 Features
  - Quick filter box in the Find toolbar to find miner or miners by IP address or description
  - Miner property filter for IP address or description
  - Heat map: Filtering for list of miners
  - Heat map: The dialog for configuring the heat map size also includes a setting if the column and row headers should be displayed
  - Heat map: Web interface support
  - Heat map: General improvements
  - Improved sorting of miners in the list of available miners for a heat map
  - The information column can display the MAC address of a miner
  - Proft Profile can be configured to run mining software with administrator privileges, configurable per algorithm
  - Introduce varable [tags] to get a comma separated list of all tags for a miner
 Integration
  - Wallet balance feature can be configured to send custom HTTP headers when requesting balance from a block explorer
 Changes
  - External Miners in Disabled state will no longer consume a license
  - Introduce a one second delay when making multiple calls to the same block explorer for wallet balance of multiple addresses
 Mining software
  - SrbMiner 0.5.2, including support for more algorithms
  - T-Rex 0.17.3, including support for Nicehash pool Ethereum mining and use of PCI Bus ID device order
  - NbMiner 32.0, including more fleixble support for specifying pool protocol for Ethereum
  - WildRig 0.27.5
  - XmRig 6.3.4
  - Gminer 2.26
  - TeamRedMiner 0.7.11
  - Nanominer 1.11.0
  - Bminer 16.3.1
 Corrections
  - Correction to Zergpool region URLs
  - Correction to Graviex exchange balance
  - Correction to list of groups when moving miners in web interface
  - Correction to tooltip display for miners in the heat map

Version 8.0.1 (2020-09-11)
 GPU mining
  - Improved output from Diagnostics
 Features
  - Heat map for display of temperatures and hashrates of miners. Heat maps can be created from a Miner Group in the Groups tab.
 Mining software
  - Miniz Miner 1.6v6
  - TeamRedMiner 0.7.10
  - SrbMiner Multi 0.5.1. This version is configured differently compared to older versions
  - Lolminer implementation updated to use algorithm parameter instead of coin parameter
 Corrections
  - Correction to Fan Speed trigger for ASIC miners
  - Correction to wallet balance total in case one of the wallets failed to update correctly

Version 8.0  (2020-09-07)
 Important:
   Awesome Miner and Remote Agent now requires Microsoft .NET Framework 4.7.2 or later.
   - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required.
   - For Windows 7, Windows 8 and older versions of Windows 10 and Windows Server, please download and install:
     https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer
 Awesome Miner Antminer firmware
  - Antminer firmware S17, S17+, T17, T17+ version 2.0.3 supported and released
  - The rule action to set Firmware mining profile has been improved to allow any mining profile property to be set
 ASIC mining
  - The operations to set Default Pools, Reboot, Change firmware and set web password have been redesigned to work on multiple kinds of ASIC miners
  - NOTE: If using Innosilicon, Avalon 10-series or Whatsminer, please open the Properties of the External Miner and select the correct ASIC hardware type. The miner credentials are also entered for the External Miner Properties or globally in the Options dialog, Mining Settings section.
  - Avalon 10-series ASIC integration improved with: Default Pools, LED on/off, Pause/Resume mining, Set network settings
  - Avalon ASIC support for latest firmware versions
  - Whatsminer ASIC integration improved with: Reboot, Restart, Default Pools, LED on/off, Pause/Resume mining, Change password, Firmware updates, Set network settings. Requires August 2020 firmware.
  - Antminer S19 improvements, including operations to pause (sleep) and resume mining
 GPU mining
  - Display of PCI Bus ID on the GPU tab
  - Display of GPU memory size and GPU memory manufacturer on the GPU tab
  - The GPU information dialog (View GPU Details) can also show information for Linux based systems
  - Detection of nVidia Cuda 10.2 and 11.0 to support selection of mining software with dependencies on recent Cuda versions
 Features
  - Miner groups: The miners in a group can be sorted by IP address
  - Miner groups: Display of ideal hashrate. Configurable in the Options dialog, General section
  - Miner groups: Display the number of hashing miners (miners with a non-zero hashrate). Configurable in the Options dialog, General section
  - Miner groups: Miners can be added to Virtual miner groups via the Miners tab, via the context menu, Group section
  - Miner groups: Virtual miner groups can be opened from the Groups tab - opened in Miners tab with a filter for the selected virtual miner group
  - Miner groups: Use colors to indicate if a miner group (on the group page) has one or more miners not hashing or not running at all
  - Filtering: Filtering of miners to only show miners with zero hashrate
  - Filtering: Improved miner list filtering where filtering can be applied on a number of properties. Configurable via the toolbar Find, Property filter.
  - Filtering: Improved miner list filtering by introducing profiles, where filters can be saved with a name and activated with a click
  - Filtering: The miner list indicates if a filter is active, including a button to clear all active filters
  - Information column: Display ASIC chip temperature
  - Information column: Display ASIC firmware version for more ASIC models
  - Add miner wizard: Network scan supports IP ranges to be entered like 192.168.0-2.100-199
  - Add miner wizard: External Miners can also be added with IP ranges, to add a large number of miners at once
  - For large mining operations where the concept of Global command queue is displayed, use right click to be display a context menu where the queue can be cleared
  - Export of all selected miners and their current status to CSV. The feature can be acccessed via the toolbar Tools -> Export -> Export to CSV
  - The dashboard will display Pool balance, Wallet balance and Exchange balance when the coin is Bitcoin
  - Mining history can store statistics in 1 hour intervals instead of 5 minutes, if configured
 Security
  - Permissions to access Virtual Groups can be assigned to user groups
  - Improvements when using multiple user accounts in the Windows application, where it's made possible to sign out and sign in with another account (via the Menu).
  - Configurable permission: Financial details, to define if revenue, profit, and balance should be displayed
  - Configurable permission: Manage user groups, to define if groups can be added, modified and removed
  - Configurable permission: Organize miners, to define if miners can be moved to other groups
  - When a user is assigned access to all miners, all virtual groups will also be included
 Integration
  - Added wallet balance support for ARRR and updated for KMD
  - Pool balance for F2pool
  - Zergpool regions configurable
 Configuration
  - The Total group in Groups tab can be hidden. Right click on the area of groups to show or hide this group. If hidden, the group will be hidden in the web interface as well.
  - Number of coins to show with exchange rate the status bar can be configured (from 0 - 20). The default is still to show 15 coins. Configurable in the Options dialog, Coins section.
  - Variables (to be used by rules) can be view and configured in the Properties of a miner
 User interface
  - Improved use of metric units for large hashrate and power usage
  - External Miner Properties organized to have the most common settings available in the General section while less common settings have been moved to the Advanced section
  - Summary tab for a miner has been reorganized to give a better overview
  - ASIC tools menu has been reorganized to match the improved support of ASIC miners for several of the operations
  - Rule action menu for ASIC related operations has been reorganized in a similar way
  - Operations performed via the ASIC tools menu with progress display will now list all miners with their configured ASIC hardware before any operation is performed
  - Added more coin images
 Web
  - The feature to move miners to a group is made available via the web interface
  - Web interface can redirect to a the requested page after signing in
  - Ideal hashrate and number of hashing miners is displayed on the Groups page in the web interface
 Changes
  - Adjusted timeout values for ASIC miner web requests
 Mining software
  - CryptoDredge 0.25.1
  - XmRig 6.3.3
  - GMiner 2.22
  - T-Rex 0.16.2
  - Nanominer 1.10.1
  - Lolminer 1.07
  - Bminer 16.3
  - Miniz 1.6v5
  - PhoenixMiner 5.1c
 Corrections
  - Correction to display of GPU PCI Bus ID when using automatic mapping to system monitoring
  - Correction to web dashboard circle graph
  - Correction to Mining Pool Hub pool balance
  - Correction to Remote Agent running on Fedora Linux with 7 digit process identifiers
  - Correction to reading of nVidia power usage on Linux
  - Correction to NbMiner Ethereum mining protocol for 2miners.com

Version 7.8.5 (2020-07-31)
 ASIC mining
  - Managed Hosts used as Remote Proxies will include the number of External Miners using it
 GPU mining
  -  GPU selection improved for systems with a mix of AMD and nVidia GPUs when mining with NbMiner and WildRig Miner
 Rules
  - A rule can be configured to execute the list of actions of another rule
  - A rule can be configured to execute the actions for a fixed list of miners instead of using the triggered miners
  - Adding a new user defined rule will enable it by default
 Integration
  - Updated block explorer for BTCP for wallet balance
  - Added Nicehash Cuckarooz29 pool
 Mining software
  - Bminer 16.2.12
  - Gminer 2.20
  - XmRig 6.3.1
  - TeamRedMiner 0.7.9
  - Nanominer 1.9.6
 Corrections
  - Correction to display for number of active miners in the group summary

Version 7.8.4 (2020-07-13)
 ASIC mining
  - Antminer Z15 supported with correct hashrate display
 GPU mining
  - Bulk edit of number of expected GPUs, for use with Device Count trigger to detecting missing GPUs
 Rules
  - The Device Count trigger made more flexible to support trigger conditions not only on missing devices but also when the number of devices are on the expected level
 Mining software
  - Add mining software: XMR-Stak-RX
  - Gminer 2.15
  - Lolminer 1.04
  - XmRig 6.2.3

Version 7.8.3 (2020-07-06)
 GPU mining
  - Added additional mining algorithms
 Features
  - The Information column can be configured to display the Antminer ASIC voltage
 Changes
  - The Mining History will ignore unrealistic temperature readings reported by mining software or ASIC miners
 Mining software
  - GMiner 2.13
  - Lolminer 1.03
  - NoncerPro nVidia Miner 3.3.1

Version 7.8.2 (2020-07-02)
 Awesome Miner Antminer firmware
  - User interface update: Added Mining Profile configuration property for Reset Profile
 Features
  - Operations can be performed on groups (both standard groups and Virtual miner groups) on the Groups tab in the same way operations are performed on the Miners tab
  - The groups on the Groups tab will display power efficiency and average miner revenue if configured
 Mining software
  - GMiner 2.12
  - Lolminer 1.02
  - WildRig Miner 0.25.2
  - CpuMiner-Opt 3.14.3

Version 7.8.1 (2020-06-30)
 GPU mining
  - Support for BeamHashIII mining
 Features
  - Virtual miner groups - displayed and configured on the Groups tab
    - Virtual miner groups are not displayed on the Miners tab and not related to the primary group structure
    - A Virtual miner group can include any number of miners and miner groups. Multiple Virtual miner groups can include the same miners.
    - Virtual miner groups can be used for miner selection for rules
    - Rule action 'Virtual miner group' to either add or remove miners from a Virtual miner group
  - Mining history setting for usage display in percent or time is saved
 Changes
  - Hide secondary hashrate for mining software with dual mining support in case dual mining isn't used
  - If miner revenue calculations are configured to consider the average hashrate the power usage should also be adjusted to match the average hashrate relative the current hashrate
 Mining software
  - GMiner 2.11
  - Lolminer 1.01
  - TeamRedMiner 0.7.7
  - Bminer 16.2.6
  - Miniz miner 1.6v3
 Corrections
  - Correction to Miner Group Summary setting that wasn't saved correctly when restarting the application

Version 7.8 (2020-06-26)
 ASIC mining
  - Improved support for monitoring of Antminers running BraiinsOS BOSminer
 GPU mining
  - Added additional algorithms
 Rules
  - Multiple rules can be selected and removed in a single operation
  - Improved import and export of rules
  - Configuration to ignore rules on startup. Configurable in the Options dialog, Advanced section
  - All rules can be paused via the toolbar Tools -> Rules -> Pause all rules. The rules can be resumed using the same menu.
 Features
  - Mining History can report usage in either percent or time (previously only percent was displayed)
  - Miner Group summary can display average revenue per miner. Configurable in the Options dialog, General section.
  - Miner revenue calculations can be configured to use the average miner hashrate instead of the current hashrate (default). Configurable in the Options dialog, General section.
  - List active rules for a specific Miner Group. Available via the context menu for a miner group, Group -> Rules.
 Mining software
  - NbMiner 31.3
  - XmRig Miner 6.2.2
  - Bminer 16.2.4
  - T-Rex Miner 0.15.8
  - Lolminer 1.0

Version 7.7.6 (2020-06-19)
 Awesome Miner Antminer firmware
  - Antminer firmware S17, S17+, T17, T17+ version 2.0.1 released
  - Added configuration for the new Mining Profile properties in version 2.0.1
  - Updated user interface for Mining Profile configuration
 Features
  - Notification action can be configured with webhook HTTP headers
 Corrections
  - Correction to display for current mining profile

Version 7.7.5 (2020-06-17)
 Awesome Miner Antminer firmware
  - List Mining Profile power usage for Antminer S17 and T17.
 Features
  - Progress column adds support for expression 'miningHelper.GetBtcPerDay()'
  - Information column adds Revenue in USD/day and Profit in USD/day
  - Webhook action can set custom HTTP headers
 Configuration
  - Configurable if Dashboard should count disabled miners in total number
 Mining software
  - SrbMiner Multi 0.4.7
  - TeamRedMiner 0.7.6
 Corrections
  - Correction to system uptime trigger
  - Correction to license usage check for subscriptions
  - Correction to Prohashing pool balance

Version 7.7.4 (2020-06-11)
 Awesome Miner Antminer firmware
  - The ASIC tab displays the ideal hashrate per device
 ASIC mining:
  - The ASIC tab displays the fan speed in a separate column
 Rules
  - The trigger for Miner State includes additional disconnected stats to consider
 Mining software
  - XmRig Miner 6.2
  - Wildrig Miner 0.25.1
  - Gminer 2.10
  - TeamRedMiner 0.7.5
  - CpuMiner-Opt 3.14.2
  - SrbMiner 0.4.6
  - PhoenixMiner 5.0e

Version 7.7.3 (2020-06-02)
 ASIC mining
  - Pool changes supported for Antminers running BraiinsOS BOSminer
 Features
  - Rule variables via Check Variable trigger and Set Variable action. Can for example be used as counters for how many times a rule has been executed for a specific miner.
  - Rule action to move miners to miner group
  - Tag filtering can be set to Inverted mode, to show all miners that don't meet the filter criteria
 User interface
  - Miner list can be sorted by average hashrate
 Mining software
  - SrbMiner 0.4.5
 Corrections
  - Correction to sorting by time in the list of notifications for a specific miner

Version 7.7.2 (2020-05-28)
 GPU mining
   - Improved Device Count trigger. A Managed Miner (and Managed Profit Miner) can be configured for an expected number of mining devices (GPUs, CPUs) in the Properties, Advanced section, of the miner. The Device Count trigger can be configured to trigger if the number of reported mining devices are less than expected.
   - Diagnostics improved to detect and display additional Visual C++ runtime versions installed
 Features
  - New rule trigger for system uptime
  - Rules can be configured to limit the number of executions per day
  - The Information column can be configured to display the revenue and profit in BTC per day, no matter which primary display currency is being used.
  - The Information column can be configured to display number of mining devices
 User interface
  - Operations to expand all and collapse all miner groups
 Mining software
  - PhoenixMiner 5.0b
  - Bminer 16.2.1
  - T-Rex Miner 0.15.7
  - XmRig miner 5.11.2
  - TeamRedMiner 0.7.3
 Corrections
  - Correction to profit switcher calculations for Luxor Equihash pool
  - Correction to WildRig running on Linux

Version 7.7.1 (2020-05-21)
 Features
  - Awesome Miner API endpoint for reading and setting GPU clocking properties
 Integration
  - Luxor Mining Pool Equihash pool profit display
  - Nicehash account balance. Requires to be configured in the Options dialog, Balance section
  - Mining Dutch pool list updated
 Changes
  - When adding multiple External Miners by a list of IP addresses, any duplicates compared to what's already added in Awesome Miner will be ignored
 Mining software
  - Kawpow Miner 1.2.3
  - Miniz Miner 1.5t3
  - CpuMiner-Opt 3.13.2
  - WildRig Miner 0.24.1
  - TeamRedMiner 0.7.1
  - NanoMiner 1.9.4
  - Z-enemy Miner 2.6.2
 Corrections
  - Correction to ASIC chip ideal hashrate calculations for Awesome Miner Antminer S9 Dual mode firmware
  - Correction to GPU selection using Claymore Ethereum Miner in systems with a mix of AMD and nVidia GPUs
  - Correction to Mining Profile selection for rule action and added missing 65 TH mining profile selection for Antminer S17 running latest firmware version

Version 7.7 (2020-05-14)
 ASIC mining
  - Set custom configuration properties adds support for setting pool properties using property name expressions like: pools[0].url
 GPU mining
  - Only show mining software version when known and not when defining a custom software version
  - The feature to automatically map GPUs to system monitoring will always be enabled
 Features
  - Russian language support. The language is configurable in the Options dialog, General section.
 Rules
  - Antminer feature 'Set custom configuration properties' available via rule actions
 User interface
  - Added support for sorting on pool in the miner list
 Mining software
  - Added software: Kawpow Miner 1.2.2
  - T-Rex miner 1.15.6
  - WildRig Miner 0.23.2
  - SrbMiner-Multi 0.4.4
  - NanoMiner 1.9.3
  - CpuMiner-Opt 3.13.1
  - TT-Miner 5.0.1

Version 7.6 (2020-05-06)
 ASIC mining
  - Fan speed display for BraiinsOS BOSminer
 GPU mining
  - Configuration of time span for mining process restart on frequent crashes. Configurable in the Options dialog, Mining Settings.
  - RVN coin prepared for Kawpow algorithm. Fork and algorithm change on May 6th, 18:00 GMT. Coin statistics may not be correct for some period of time after the fork.
 Features
  - Support for improved concurrency when using large scale mining operations. The concurrency level can now be increased to 200 in the Options dialog, Advanced section.
 User interface
  - Sorting of the Progress column can sort on the value displayed as part of a custom expression
 Integration
  - Updated Ethereum, Verge and Bitcoin Cash block explorers for wallet balance
 Mining software
  - NanoMiner 1.9.1
  - T-Rex miner 1.15.4
  - NbMiner 30.2
  - WildRig Miner 0.20.6
  - Z-enemy Miner 2.5
  - Bminer 16.2
 Corrections
  - Correction to the PROTO parameter for Phoenix Miner when mining UBQ

Version 7.5.5 (2020-04-30)
 Awesome Miner Antminer firmware
  - New firmware version 3.8.7.1 for Antminer L3+/L3++. After the upgrade, a Mining Profile must be applied for the Antminer to operate at the correct hashrate.
 ASIC mining
  - Temperature display for BraiinsOS BOSminer
 Changes
  - Improved log file rotation
 Mining software
  - Gminer 2.09
  - CpuMiner-Opt 3.12.8.2
  - NbMiner 30.0
 Corrections
  - Managed Profit Switcher correction for a specific scenario where Phoenix Miner is used in combination with thresholds
  - Correction to profit factors calculations for user defined pools in specific scenarios

Version 7.5.4 (2020-04-24)
 Features
  - Display of power efficiency in the miner list and displayed as an average per miner group. Configurable in the Options dialog, General section.
 Mining software
  - TT-miner 4.0.0
  - XmRig 5.11.1
 Corrections
  - Correction to triggers detecting the current Firmware Mining Profile for Antminer S17/T17
  - Correction to profit factors calculations for user defined pools in specific scenarios

Version 7.5.3 (2020-04-22)
 Features
  - Added HTTP API for modifying configuration file properties on Antminers
  - The Information column can include power efficiency expressed as Watt/TH
  - Show Antminer firmware date on the Summary tab for a selected miner
  - The use of MiningWorker variable in the pool password field can be used even when 'Add to worker name' is disabled on the miner
 Mining software
 - CpuMiner-Opt 3.12.8.1
  - XmRig 5.11

Version 7.5.2 (2020-04-16)
 Awesome Miner Antminer firmware
  - Introducing firmware for Antminer S17+
  - Introducing firmware for Antminer T17+
 ASIC mining
  - Antminer K5 supported with temperature display and device details
 GPU mining
  - Improved support for Ubuntu 20.04 for Remote Agent on Linux
 Mining software
  - SrbMiner Multi 0.4.3
  - CpuMiner-Opt 3.12.8

Version 7.5.1 (2020-04-10)
 Awesome Miner Antminer firmware
  - Make the existing feature Default Pools (via web) available for Antminers running the Awesome Miner Antminer firmware, in case SSH isn't preferred
  - Improved display of temperatures when a hashboard isn't working
 Mining software
  - SrbMiner 0.4.2
  - Gminer 2.06
  - RhMiner 2.3
  - NbMiner 29.1
 Corrections
  - Correction to hashrate display for Claymore Neoscrypt miner

Version 7.5 (2020-04-02)
 ASIC mining
  - Innosilicon miners can be rebooted via the web interface. The External Miner has a new property 'Miner type' where Innosilicon can be selected, required for the Innosilicon specific reboot operation.
  - The External Miner property for Avalon 10 miners has been moved to be a part of the new 'Miner type' property, where Avalon 10 is one of the options.
 GPU mining
  - IMPORTANT: Awesome Miner will by default automatically map GPU monitoring details to the GPUs reported by the mining software, unless manual 'Map to system monitoring' is used. To disable the new behavior, go to the Options dialog, GPU Settings section, where 'Automatic device mapping' can be disabled.
  - Improved device mapping when using a mix of GPU models
 Rules
  - Added trigger for looking at the current Mining Profile for Antminers running the Awesome Miner firmware
 User interface
  - The list of active mining devices for a miner can be selected and copied to clipboard
 Changes
  - Using the new subscription based licenses with Managed Miners, only one license is consumed per host instead of per miner instance.
 Mining software
  - CpuMiner-Opt 3.12.7
  - XmRig 5.10.0
  - SrbMiner 0.4.1
  - WildRig miner 0.20.5b
  - Gminer 2.04
  - NbMiner 28.1
  - Bminer 16.1
 Corrections
  - Correction to pool and worker name display on the Pools tab in specific dual mining scenarios
  - Correction to dual mining revenue calculations for specific pool combinations

Version 7.4 (2020-03-17)
 ASIC mining
  - Network scan for Antminers supports a new mode where the hostname of the miner can be defined as part of the scan - also linking the hostname with the External Miner
  - Add multiple External Miners at once by specifying a list of IP addresses in the Add Miner wizard
  - Support copy of IP addresses to clipboard from the list of results when performing ASIC operations like Default Pools or Configure API Access
  - Antminer IP Reporter feature, where pressing the 'IP Report' button on an Antminer. This feature can be accessed via the toolbar Tools -> ASIC Tools.
 GPU mining
  - Edit GPU Clocking Profiles directly from the Benchmark dialog
  - Added additional algorithms
  - Improved device power usage detection for GPU mining benchmark
 Rules
  - New trigger for mining uptime. Can be used to define behaviors after the mining has been running for a certain period of time.
  - Improved trigger 'Detect dead/sick device' to detect ASIC chip marked as Red by the Awesome Miner Antminer firmware
 Features
  - The profit switcher can be configured for a second switching interval with another threshold level. Example: If the primary interval is 3 minutes with a 20% threshold, the secondary interval can be 8 minutes with a 10% threshold.
  - The profit switcher for External Miners supports the setting for Minimum time on pool
  - A profit profile can be configured to override the global value for Minimum time on pool. Can for example be used to switch pools for ASIC miners less often than GPU miners.
  - The information column can be configured to show the notes entered for a miner, mining software, ASIC description and ASIC details
 Mining software
  - Gminer 2.01, incl. dual mining of Ethereum + Handshake
  - NbMiner 27.7
  - XmRig 5.9
  - CpuMiner-Opt 3.12.6.1
  - SrbMiner 0.4.0
  - NoncerPro nVidia Miner 3.3.0
 Corrections
  - Correction to GPU Clocking Profile Groups on Linux
  - Correction to benchmark of Handshake algorithm for NbMiner and Gminer
  - Correction to Phoenix Miner algorithms
  - Correction to main window behavior to prevent it from staying on top
  - Correction to API reports taking long time to generate due to slow ASIC miner responses
  - Correction to display of mining software uptime when more than one day
  - Correction to Task Scheduler setup in environments where the computer name and user name is identical
  - Improved behavior in case the computer time is being changed
  - Improved fan speed display for Awesome Miner Antminer firmware with fan check turned off

Version 7.3.8 (2020-03-02)
 Corrections
  - Correction to Antminer detection (issue introduced in 7.3.7)
  - Correction to web interface when screen height was very small

Version 7.3.7 (2020-03-02)
 ASIC mining
  - Antminer network settings (IP address and hostname) can be configured via the toolbar Tools -> Antminer network
 Mining software
  - CpuMiner-Opt 3.12.5
  - WildRig Miner 0.20.4
  - SrbMiner Multi 0.3.7
  - NbMiner 27.4
 Corrections
  - Correction to XmRig GPU device order reporting
  - Make Pool Configuration available via the local web interface even when running in mobile mode

Version 7.3.6 (2020-02-26)
 Awesome Miner Antminer firmware
  - Improved firmware installation for Antminer L3+ with better unlock support
 ASIC mining
  - Added feature to configure Antminer network settings (via the ASIC Tools menu)
 Configuration
  - Added new setting for the automatic API access configuration, to indicate if a mining process restart should be automatically performed
 Mining software
  - CpuMiner-Opt 3.12.4.3
  - XmRig 5.7
  - Gminer 1.98
  - WildRig Miner 0.20.2
  - SrbMiner Multi 0.3.6

Version 7.3.5 (2020-02-24)
 GPU mining
  - Added additional algorithms and coin images
 Features
  - Awesome Miner will automatically update mappings of coin algorithms from our cloud servers. New coins can also be introduced faster this way.
 Mining software
  - XmRig integration improved to display CPU and GPU devices separately
  - SrbMiner Multi 0.3.5, including Linux support
  - NbMiner 27.2, including Hanshake dual mining support
  - Bminer 16.0.7, including Hanshake dual mining support
  - Lolminer 0.9.8
  - CpuMiner-Opt 3.12.4.2
  - Nanominer 1.8.2
  - Gminer 1.97
 Corrections
  - Correction to configuration of increased GPU power usage reporting in percent for Linux
  - Correction to display of API identifier for Managed Templates
  - Improved display of chip status for Awesome Miner firmware even if the configuration file isn't complete

Version 7.3.4 (2020-02-15)
 Awesome Miner Antminer firmware
  - Firmware version 1.0 for Antminer S17 and T17.
  - Updated mining profile configuration in Awesome Miner to support the new firmware version
 Features
  - Network Scan improved to allow adding found ASIC miners by hostname instead of IP address
  - Network Scan user interface improved and more of the scan settings are saved
 Mining software
  - XmRig 5.6
  - CryptoDredge 0.23
  - Nanominer 1.8.1
 Corrections
  - Correction to how accepted and rejected shares from the DevFee pools are excluded from the total number of shares in the miner list

Version 7.3.3 (2020-02-14)
 Awesome Miner Antminer firmware
  - Firmware for Antminer L3+ officially supports Antminer L3++ as well
 Integration
  - Made more CryptoNight related algorithms available for Yiimp-based pools
 User interface
  - Updates to control alignments
  - Disable access to 'Default pools (via web)' for miners running the Awesome Miner Antminer firmware. Use the SSH method instead.
 Features
  - Exchange filter on volume can be configured to favor high volume exchanges while still being able to fallback a lower volume exchange if no better exchange is available
 Mining software
  - CpuMiner-Opt 3.12.3
  - RhMiner 2.2b
 Corrections
  - Correction to display of ASIC chip performance for Antminer T9+ running the Awesome Miner firmware

Version 7.3.2 (2020-02-11)
 Awesome Miner Antminer firmware
  - Exclude the accepted and rejected shares from the DevFee pools in the total number of shares in the miner list
 ASIC mining
  - Reboot support for Avalon 10 ASIC miners
  - Bulk Edit of property for Avalon 10 on External Miners
 Features
  - Automatic backup of all configuration before upgrading to a new version
 Integration
  - Changed block explorer for BTC to get bech32 address support
 User interface
  - New information icon and tooltip design
 Mining software
  - Bminer 16.0.5
  - CpuMiner-Opt 3.12.2
  - Nanominer 1.8
  - RhMiner 2.2
 Corrections
  - Correction to setting fan speed for nVidia RTX 2000 on Linux

Version 7.3.1 (2020-02-06)
 Corrections
  - Correction to wallet balance display for user defined coins with a value specified in USD instead of BTC
  - Correction to loading of Tag related actions

Version 7.3 (2020-02-06)
 Awesome Miner Antminer firmware
  - New firmware release (0.9.9 beta2) for Antminer S17 and T17 available
  - Mining Profile configurable for Antminer S17 and T17
  - ASIC chip performance display for Antminer S17 and T17
  - Mining Profile configurable for Antminer T9+
  - Firmware mining profile can be access via the main toolbar of Awesome Miner
 ASIC mining
  - Improved pool change support for Avalon 10 ASIC miners
  - Improved display of the speed of all fans for recent Antminers and Canaan Avalon miners
 GPU mining
  - System monitoring of disk space will query for free disk space less frequently
  - Automatic disable of Windows Update on all mining computers, configurable via the Options dialog, Mining Settings section
  - Automatic update of Remote Agents, configurable via the Options dialog, General section
 Features
  - The API to set coin profitability will also allow for making name changes to a user defined coin
  - The Information column can be configured to display the fan speed for ASIC and GPU miners
 Integration
  - Luxor mining pool
  - Nicehash CuckaToo32 pool added
 Configuration
  - Increased the maximum wait times configurable in the Options dialog, Mining settings
 User interface
  - Updates to text strings in the user interface to be more consistent
 Mining software
  - Bminer 16.0.3
  - Miniz Miner 1.5t
  - CpuMiner-Opt 3.12.0
  - XmRig 5.5.3
  - Nanominer 1.7.3
  - Lolminer 0.9.7, incl. improved algorithm parameter configuration via Awesome Miner
  - RhMiner 2.1c
  - Gminer 1.96
  - SrbMiner Multi 0.3.1
Corrections
 - Correction to date display in the benchmark window
 - Correction to device selection when using Gminer with both AMD and nVidia

Version 7.2.10 (2020-01-21)
 GPU mining
  - Improved compatibility for reading GPU power usage on recent nVidia driver versions
 Mining software
  - Gminer 1.95
  - Bminer 16.0.1
  - Lolminer 0.9.6
  - Nanominer 1.7.1
  - CpuMiner-Opt 3.11.5
  - SrbMiner Multi 0.3
 Corrections
  - Correction to sorting by temperature in the miner list

Version 7.2.9 (2020-01-17)
 Mining software
  - Gminer 1.94
  - CpuMiner-Opt 3.11.4
 Corrections
  - Correction to scenario when creating a new user defined coin
  - Ensure all new Online Services pools are enabled for the profit switcher by default

Version 7.2.8 (2020-01-16)
 Features
  - Cloning of Clocking Profile Groups and Profit Profile Groups via the Options dialog
 Integration
  - Nicehash Cuckaroom29 pool added
  - Removed Mining Pool Hub CryptonightV4 pool from profit switcher
 Mining software
  - Bminer 16.0
  - Gminer 1.93
  - Lolminer 0.9.5.1
  - Nanominer 1.7
 Corrections
  - Correction to power usage display for Antminer L3+ running the Awesome Miner Antminer firmware

Version 7.2.7 (2020-01-14)
 ASIC mining
  - Support for pool changes on Avalon 10 miners where the standard management interface isn't available
 GPU mining
  - Added Gminer dual mining support
  - Possible to configure empty personalization string for algorithms and software where a default value is used
 Features
  - Awesome Miner can update coin exponential factors and algorithm overrides without having to install a new software version
 Integration
  - Improved Mining Dutch mining information
 Mining software
  - CpuMiner-Opt 3.11.3
  - XmRig 5.5.1
  - Z-enemy Miner 2.4
 Corrections
  - Correction to profit switching calculations for dual mining

Version 7.2.6 (2020-01-09)
 GPU mining
  - Support variables in the command line field for a pool
  - The configuration file for the mining software NanoMiner and XmRig can be modified via the Properties of a Managed Miner
 Integration
  - Nicehash Eaglesong pool added
  - Nicehash SHA-256 AsicBoost pool added in addition to the standard SHA-256 pool
  - Updated block explorer for ETC wallet balance
 Mining software
  - CpuMiner-Opt 3.11.1
  - Phoenix Miner 4.9c
 Corrections
  - Correction to nVidia GPU initialization on Linux

Version 7.2.5 (2020-01-02)
 Awesome M

[Bulk-Neteller Ltd]

nice article and post here. am learning a lot.

[compile]

Well I would use it if it worked.

Either sgminer crashes or I have restricted permission.  Plus sent an email for help this morning and still haven't heard back.

[patrike]

Well I would use it if it worked.

Either sgminer crashes or I have restricted permission.  Plus sent an email for help this morning and still haven't heard back.

Hi,
I have answered your e-mail now, about 5 hours after it was sent. Many thanks for trying out the software.

For the restricted access problem, I've sent you instructions how to enable write-mode for the cgminer/sgminer API that is required by Awesome Miner for many of the features.

Again, many thanks for helping out making the software better!

[poplolnman]

my antivirus keeps on blocking the miners...never had any problems with any miners except those downloaded by your program....

[mrreece]

Working well for me on a test box. Any chance of getting it working with Cudaminer?

[patrike]

my antivirus keeps on blocking the miners...never had any problems with any miners except those downloaded by your program....

When using the automatic download feature in Awesome Miner, a zip-file will be downloaded from the official download location if still available. As a fallback, an identical copy of the original zip-file can be automatically downloaded from the Awesome Miner web site.

However, most anti-virus software warn about cgminer and similar mining software because they are being used by trojans and other malware. If you run into this problem, you can always manually download cgminer / sgminer and configure Awesome Miner to that use that downloaded instance instead.

[patrike]

Working well for me on a test box. Any chance of getting it working with Cudaminer?

Thanks for testing Awesome Miner. Cudaminer doesn't provide any API's for getting statistics and information from the miner. I've noticed that this is one of the items on their Todo-list, so it might be available in future versions. Once Cudaminer provides an API, support for Cudaminer can be implemented in Awesome Miner.

[Bombadil]

Working well for me on a test box. Any chance of getting it working with Cudaminer?

Thanks for testing Awesome Miner. Cudaminer doesn't provide any API's for getting statistics and information from the miner. I've noticed that this is one of the items on their Todo-list, so it might be available in future versions. Once Cudaminer provides an API, support for Cudaminer can be implemented in Awesome Miner.

Don't get your hopes up for an API. I started making a profit-switcher for cuda, and had to "consume" the cmd output to get all the data. It's such a PITA, I ended up just working on the profit calculation part, and so my Profit Calc was born
Anyways, if you really want cuda integrated, you'll either need to reprogram cudaminer/ccminer with an API yourself () or consume it and run it in the background. CudaManager does the same but hasn't been updated for ccminer IIRC.

[yudhistira]

I was try to setup my miner
but it always stop working

this is my setting

stratum from nicehash
x11 algo
miner from local computer

[patrike]

I was try to setup my miner
but it always stop working

this is my setting

stratum from nicehash
x11 algo
miner from local computer

Could you please send me the Awesome Miner log file to info@awesomeminer.com? The log file can be accessed from the Options dialog, Advanced section. Thanks!

[patrike]

Don't get your hopes up for an API. I started making a profit-switcher for cuda, and had to "consume" the cmd output to get all the data. It's such a PITA, I ended up just working on the profit calculation part, and so my Profit Calc was born
Anyways, if you really want cuda integrated, you'll either need to reprogram cudaminer/ccminer with an API yourself () or consume it and run it in the background. CudaManager does the same but hasn't been updated for ccminer IIRC.

Many thanks for the information. Good luck with the development of the profit calculator.

[patrike]

Version 1.0 released: Awesome Miner 1.0 Product Announcement

Next generation pool switching: Awesome Profit Switching
Awesome Miner introduces the next generation of profit switching multi-algorithm pool mining. By using both real-time coin profitability statistics to switch between single-coin pools and also using real-time statistics from popular auto-switching multi-pools, Awesome Miner can automatically switch between mining a specific coin or mine on the currently most profitable auto-switching multi-pool.

Awesome Profit Switching makes it possible to get higher profits than any of the auto-switching multi-pools alone, by automatically switching between multiple algorithms and multiple multi-pools.

Read more

[bullus]

I tested the hashrates, but it's quite a bit lower than the sgminer v5 beta, are there any improvements in the future?

Next generation pool switching: Awesome Profit Switching
Awesome Miner introduces the next generation of profit switching multi-algorithm pool mining, Awesome Profit Switching. By using both real-time coin profitability statistics to switch between single-coin pools and also using real-time statistics from popular auto-switching multi-pools, Awesome Miner can automatically switch between mining a specific coin or mine on the currently most profitable auto-switching multi-pool.

Awesome Profit Switching makes it possible to get higher profits than any of the auto-switching multi-pools alone, by automatically switching between multiple algorithms and multiple multi-pools.

So u can switch between tmb and nicehash or a sinlge coin-pool which is more profitable? and how does it calculate it and switch, api keys?

Another question;

Last time I configure it , it wasn't possible to use different xIntensity for each algo, let's say I want xI=64 for X11 and xI=51 for x13/x15, is that possible?

[williamj2543]

If I still mined, I would use this. Too bad I can't make any money anymore, the difficulty is too high these days

[patrike]

I tested the hashrates, but it's quite a bit lower than the sgminer v5 beta, are there any improvements in the future?

Awesome Miner 1.0 already uses the latest Sgminer v5 Beta: sgminer-5.0-pre-release-2014-07-20. You can also point Awesome Miner to use your own installation of a recent Sgminer v5 Beta.

If you get a little lower hash rates, I think you have to change the default settings a bit to match what you typically use. I will describe how to do that below.

Next generation pool switching: Awesome Profit Switching
Awesome Miner introduces the next generation of profit switching multi-algorithm pool mining, Awesome Profit Switching. By using both real-time coin profitability statistics to switch between single-coin pools and also using real-time statistics from popular auto-switching multi-pools, Awesome Miner can automatically switch between mining a specific coin or mine on the currently most profitable auto-switching multi-pool.

Awesome Profit Switching makes it possible to get higher profits than any of the auto-switching multi-pools alone, by automatically switching between multiple algorithms and multiple multi-pools.

So u can switch between tmb and nicehash or a sinlge coin-pool which is more profitable? and how does it calculate it and switch, api keys?

Yes, currently only TradeMyBit and NiceHash provides this kind of profitability information via their API's. I'm trying to get more multi-pool services to provide this information. The NiceHash API is fully public and doesn't require any API-key and the TradeMyBit requires your API-key (totally free to use, and can be found on your TradeMyBit account page).

For the single-coin pools, Awesome Miner support CoinChoose, CoinWarz and WhatMine as coin statistics providers. It's recommended to use either CoinWarz or WhatMine because they are updated more frequently and supports many more coins. Those will however require API-keys that are limited unless you pay.

The profit switching feature simply compares the current normalized BTC / 1MH / Day statistics for all the active pools of a miner. It will automatically detect NiceHash and TradeMyBit pools based on their URL. Every 30 minutes (configurable) it will change to the most profitable pool.

The profit switching feature is implemented using standard features provided by Awesome Miner rules and scripts, so anyone with interest can modify it and develop their own version. The feature is developed using the Awesome Miner C# Script API, and the source code can be found here: Awesome Profit Switching source code

Another question;

Last time I configure it , it wasn't possible to use different xIntensity for each algo, let's say I want xI=64 for X11 and xI=51 for x13/x15, is that possible?

You can configure this using different Device Profiles . For each pool, you can configure that a specific Device Profiles should be used. You can for example create one "X11-profile" and another "X13/X15-profile", and you configured your X11-pool to use the Device Profiles "X11-profile" and your X13 and X15 pools to use the Device Profiles "X13/X15-profile".

You can configure the Device Profiles in Options dialog, Device Profile section. If you already have a Device Profiles defined (for example "X-algorithm devices" if you imported the prepared configuration), you can clone this one and modify the copy. If not, just create the new device profiles you need.

The prepared Device Profiles are very generic, and you might have to tweak them a bit to get a good hash rate for your system, just like you used to tweak your Sgminer configuration file.

[bullus]

Thank u for the answers..I set up now and made device profiles and it's using my optimized bins, already build.

Another question.
-Let's say one gpu is dead and awesome miner is rebooting my rig, does it restart my sgminer automatic or is awesome miner only logging? Or do have to start sgminer first?

-if my rig is rented and awesome profits switching is enable, will it change the pool to tmb or nicheash? That's not realy the way.

Edit;
when awsome profit switching is enabled it is switching to another pool when my rig is rented.
Can u make a exceptional/option for betarigs/miningrigrental?

[patrike]

Thank u for the answers..I set up now and made device profiles and it's using my optimized bins, already build.

Another question.
-Let's say one gpu is dead and awesome miner is rebooting my rig, does it restart my sgminer automatic or is awesome miner only logging? Or do have to start sgminer first?

-if my rig is rented and awesome profits switching is enable, will it change the pool to tmb or nicheash? That's not realy the way.

Edit;
when awsome profit switching is enabled it is switching to another pool when my rig is rented.
Can u make a exceptional/option for betarigs/miningrigrental?

Thanks for your comments.

To automatically start mining when Awesome Miner starts, use the setting "Autostart miner" in the properties of your Managed Miner.
If you want Awesome Miner to autostart when Windows is starting, use the setting "Autostart when Windows starts" that can be found in the General section of the Options dialog.

I have to look into how to solve the rental issue. Because if you use Betarigs, you need that pool to be priority 0 (highest priority) all the time, even when it's Disabled (not rented). That should be possible to implement.

For MiningRigRental it will be a bit more difficult, as we don't know if your rig is rented by just looking at the pool, because you could mine at your pool configured in their settings - right? Maybe this can be solved by implementing their API to figure out if the rig is rented or not.

I will get back to you once I have more information.

[bullus]

Thank u for the answers..I set up now and made device profiles and it's using my optimized bins, already build.

Another question.
-Let's say one gpu is dead and awesome miner is rebooting my rig, does it restart my sgminer automatic or is awesome miner only logging? Or do have to start sgminer first?

-if my rig is rented and awesome profits switching is enable, will it change the pool to tmb or nicheash? That's not realy the way.

Edit;
when awsome profit switching is enabled it is switching to another pool when my rig is rented.
Can u make a exceptional/option for betarigs/miningrigrental?

Thanks for your comments.

To automatically start mining when Awesome Miner starts, use the setting "Autostart miner" in the properties of your Managed Miner.
If you want Awesome Miner to autostart when Windows is starting, use the setting "Autostart when Windows starts" that can be found in the General section of the Options dialog.

I have to look into how to solve the rental issue. Because if you use Betarigs, you need that pool to be priority 0 (highest priority) all the time, even when it's Disabled (not rented). That should be possible to implement.

For MiningRigRental it will be a bit more difficult, as we don't know if your rig is rented by just looking at the pool, because you could mine at your pool configured in their settings - right? Maybe this can be solved by implementing their API to figure out if the rig is rented or not.

I will get back to you once I have more information.

I have several pools for betarigs (x11-x13-x15-nist5) they are prio 0-3. If x13 is rented (prio 1) does it switch to prio 0, otherwise u have to switch manualy and sometime u forget that. Maybe u can set how many pools u have at betarigs and it should check from prio 0-3 , instead of only check prio 0..
Hope u can implement it somehow.
Anither problem was that it didn't switch to betarig when my rig was rented, I had to close awesome miner or uncheck the awesome profit switching.

miningrigrental is indeed a bit more difficult.

edit
first I made a external miner and the device profiles was working what I set.
second I made a manage miner other wise u can't start the miner when it logs on windows, but the device profiles doesn't work.
When I want to edit my profile it ask for the 3 options and it doesn't use the device profiles.
for example it should use worksize 64, but it is building a binary with worksize 256.

edit2
I used my batfile and that doesn't work, when using the sgminer.exe it is working.

Where can I insert these parameters? normaly it is in my bat-file

Code:

timeout /t 30
COLOR 0A

In the commandline it doesn't work

edit3  
For  Awesome Profit Switching, is it better to use the multi-multi switch port or the normal port?

edit4
I set Awesome Profit Switching to 2minutes and see if it switch when looking at the online services, but it doesn't switch.
tmb x11 second profitable but doesn't switch to it, it hash the pool with the highest alive prio.

edit5
I set up a poolgroup with tmb multi-multi-ports and the normal as failovers.
Problem is that the prio is at alfabet way, I can change it with the prioritize option but if I restart the miner it's back to alfabet prio.

example

default
x11 multi prio 0
x11 normal prio 1
x13 multi prio 2
x13 normal prio 3
x15 multi prio 4
x15 normal prio 5

I want this, even when u restart the miner after prioritize
x11 multi prio 0
x13 multi prio 1
x15 multi prio 2
x11 normal prio 3
x13 normal prio 4
x15 normal prio 5

Got it, in pool option u can set the prio 

sorry for the many edits