sorehammer
|
|
August 13, 2014, 09:54:28 AM |
|
What ever you get you have to make sure the clearance between the fans is good, you don't want the fans on that one hitting the other ones and if you have the fans blowing down then you need a fan blowing across the board dispersing the heat from the heat sinks just my opinion.
|
|
|
|
me2014
|
|
August 13, 2014, 10:12:57 AM |
|
Can anyone tell us how much longer we need to wait just to contact us about shipping,not to mention to tell us when does shipping start? :/
|
|
|
|
Cortex7
|
|
August 13, 2014, 04:12:36 PM |
|
Can anyone tell us how much longer we need to wait just to contact us about shipping,not to mention to tell us when does shipping start? :/
Yes, I'm also very eager to hear about shipping for Batch1 GB people. I realise @Marto must be VERY busy right now but it would be nice to know approx shipping date.
|
|
|
|
nexus99
Legendary
Offline
Activity: 910
Merit: 1000
|
|
August 13, 2014, 04:36:38 PM |
|
Can anyone tell us how much longer we need to wait just to contact us about shipping,not to mention to tell us when does shipping start? :/
Yes, I'm also very eager to hear about shipping for Batch1 GB people. I realise @Marto must be VERY busy right now but it would be nice to know approx shipping date. We are all excited to get our mitts on the boards. I have been ignoring this for a while but I think I'll get my cooler and controller orders in today. Its feels like these should be shipping soon!!
|
|
|
|
MoneyMuscles
Member
Offline
Activity: 94
Merit: 10
|
|
August 13, 2014, 07:12:20 PM |
|
There is customs clearence here that can be 2 to 3 business days. I did not get confirmation for your order from Minersource
I just followed the instructions given in the OP for this group buy. I made the order through technobit, Gave the shipping info on the website and through pm, and checked off wire transfer as instructed. The Instructions said technobit would confirm my order after those steps were taken but it has not yet happened.BA 1564 is mine and bobsag3 has previously confirmed this as apart of the list: Final list was just sent to them, you shouldn't have gotten it before ~3 hours ago.
BAS 584 BAS 1341 BAS 2470 BAS 1564 BAS 1341 BAS 2470
MS2514A MS2095 MS1540
Should be it, will double check in the morning, doesnt include minersource orders
I had to pm the Technobit order number to a Minersource member here (Thomas), he confirmed the order with Technobit then. What you quoted is the list sent to BA to be converted to chips, they will only convert to chips if they hear back from the person who placed the order confirming the chip conversion. I am showing this to show that bobsag3 confirmed me in group 2 because he was the one to put forth the original request as a group to BA for a chip conversion. I have: -Confirmed my transfer with BA -Tracked shipping from China to Bulgaria -Sent an order exactly like in the Original Post to TechnoBit I do not have a TechnoBit order number to ask about because my order was never confirmed on TechnoBit like the instructions said it was supposed to. Im trying to buy all this assembly for the TB boards off of Minersource but how am I supposed to know when to buy when I don't even know if any of this has been organized thoroughly and Im going to even receive my boards when everyone else is scheduled to.
|
|
|
|
thomas_s
|
|
August 13, 2014, 07:19:04 PM |
|
There is customs clearence here that can be 2 to 3 business days. I did not get confirmation for your order from Minersource
I just followed the instructions given in the OP for this group buy. I made the order through technobit, Gave the shipping info on the website and through pm, and checked off wire transfer as instructed. The Instructions said technobit would confirm my order after those steps were taken but it has not yet happened. BA 1564 is mine and bobsag3 has previously confirmed this as apart of the list: Final list was just sent to them, you shouldn't have gotten it before ~3 hours ago.
BAS 584 BAS 1341 BAS 2470 BAS 1564 BAS 1341 BAS 2470
MS2514A MS2095 MS1540
Should be it, will double check in the morning, doesnt include minersource orders
I had to pm the Technobit order number to a Minersource member here (Thomas), he confirmed the order with Technobit then. What you quoted is the list sent to BA to be converted to chips, they will only convert to chips if they hear back from the person who placed the order confirming the chip conversion. I am showing this to show that bobsag confirmed me in group 2 I have: -Confirmed my transfer with BA -Tracked shipping from China to Bulgaria -Sent an order exactly like in the Original Post to TechnoBit I do not have a TechnoBit reference number to ask about because my order was never confirmed on TechnoBit like the instructions said it was supposed to. Im trying to buy all this assembly for the TB boards off of Minersource but how am I supposed to know when to buy when I don't even know if any of this has been organized thoroughly and Im going to even receive my boards when everyone else is scheduled to. If you confirmed your conversion with BA they sent your order information and chip count to Technobit you just need to create an order on their website with the same information you used with BA and mention in the notes that it was a BA conversion.
|
|
|
|
MoneyMuscles
Member
Offline
Activity: 94
Merit: 10
|
|
August 13, 2014, 07:20:15 PM |
|
If you confirmed your conversion with BA they sent your order information and chip count to Technobit you just need to create an order on their website with the same information you used with BA and mention in the notes that it was a BA conversion.
I have done all that... This is exactly what Im saying. Edit: It actually changed in the last half hour thomas_s I will pm you the order number that shows up. thanks
|
|
|
|
twisted
Newbie
Offline
Activity: 35
Merit: 0
|
|
August 13, 2014, 08:58:27 PM |
|
If you confirmed your conversion with BA they sent your order information and chip count to Technobit you just need to create an order on their website with the same information you used with BA and mention in the notes that it was a BA conversion.
I have done all that... This is exactly what Im saying. Edit: It actually changed in the last half hour thomas_s I will pm you the order number that shows up. thanks I'm in a pretty similar situation... Except that my order on technobit is still pending... I've also converted my chips for assembly and I did put an order on Technobit as requested. I've sent pms on both marto & bobsag but haven't received any reply so my order is in limbo but hope it's because of the whole pressure to solve this BA mess.
|
|
|
|
y_boonstra
|
|
August 13, 2014, 09:51:06 PM |
|
I have a lot of problems to get my second ordernr wich is in batch 2 to get converted to chips.. Im PM Bob, Thomas, David from ecointalk i even email BS but NOBODY answers.. i never got an confimation email for my B2 conversion from BA and i cannot get trough anybody!!
Bob, i pmd you serveral times i need some help on this one!!
|
|
|
|
MoneyMuscles
Member
Offline
Activity: 94
Merit: 10
|
|
August 14, 2014, 12:21:45 AM |
|
If you confirmed your conversion with BA they sent your order information and chip count to Technobit you just need to create an order on their website with the same information you used with BA and mention in the notes that it was a BA conversion.
I have done all that... This is exactly what Im saying. Edit: It actually changed in the last half hour thomas_s I will pm you the order number that shows up. thanks I'm in a pretty similar situation... Except that my order on technobit is still pending... I've also converted my chips for assembly and I did put an order on Technobit as requested. I've sent pms on both marto & bobsag but haven't received any reply so my order is in limbo but hope it's because of the whole pressure to solve this BA mess. Mine is also still pending, thats partially what I've been trying to communicate to TechnoBit and Minersource.
|
|
|
|
marto74
|
|
August 14, 2014, 07:30:15 AM |
|
So, a little clearness on orders and order confirmations. 1.When using chip vs assembly payment option you place an order with technobit and choose bank wire payment. 2. The order is accepted when the chips get here and miner source confirm to me that your order ref is part of this GB deal. All confirmed by miner source orders are "payment accepted " now
|
|
|
|
sorehammer
|
|
August 14, 2014, 07:49:43 AM |
|
Cheers for all your help marto your service has been top notch I look forward to making more orders with you in the near future . Same goes for bobsag3 at minersource.
|
|
|
|
Qeu
|
|
August 14, 2014, 07:54:15 AM |
|
So, a little clearness on orders and order confirmations. 1.When using chip vs assembly payment option you place an order with technobit and choose bank wire payment. 2. The order is accepted when the chips get here and miner source confirm to me that your order ref is part of this GB deal. All confirmed by miner source orders are "payment accepted " now
I paid with btc and got "payment accepted" since I placed the order on 17th July, any difference for those orders, I asked by using your messaging service in the order page itself. Is there any date solid for shipping batch 1 orders, now the one from last Saturday went by without any update yet?
|
|
|
|
marto74
|
|
August 14, 2014, 08:44:01 AM |
|
So the GB order means some produces boards as a batch in order to keep costs as down as possible. You might paid on 17-th , but the start is as soon the all the chips for the batch arrive here. I think you used the GB discount , right ? We are doing our best here.
|
|
|
|
Qeu
|
|
August 14, 2014, 09:00:28 AM |
|
I think you used the GB discount , right ? We are doing our best here.
Yes, the GB. I know you do your best, but a date or schedule would be nice, you know where we come from (BA) and what we went through with those next week next week next week next week schedules. This is starting to feel the same if you mention a date, miss it, and don't give updates about why and what's next.
|
|
|
|
sorehammer
|
|
August 14, 2014, 09:28:38 AM |
|
I have to give marto credit I only had one board and it's sitting at the parcel depot waiting for me. So he will deliver most of you have a fair few boards being produced and he has a small team doing this and many other orders.
|
|
|
|
y_boonstra
|
|
August 14, 2014, 11:28:22 AM |
|
I have a lot of problems to get my second ordernr wich is in batch 2 to get converted to chips.. Im PM Bob, Thomas, David from ecointalk i even email BS but NOBODY answers.. i never got an confimation email for my B2 conversion from BA and i cannot get trough anybody!!
Bob, i pmd you serveral times i need some help on this one!!
Up
|
|
|
|
y_boonstra
|
|
August 14, 2014, 11:29:28 AM |
|
Marto,
How many chips do i still have in my TB account?
|
|
|
|
marto74
|
|
August 14, 2014, 11:52:10 AM |
|
PM me order ref
|
|
|
|
marto74
|
|
August 14, 2014, 11:59:20 AM |
|
I think you used the GB discount , right ? We are doing our best here.
Yes, the GB. I know you do your best, but a date or schedule would be nice, you know where we come from (BA) and what we went through with those next week next week next week next week schedules. This is starting to feel the same if you mention a date, miss it, and don't give updates about why and what's next. Look We have some production back drafts, but I do not want to create a new "LCD delivery" issue. In any case it is in our hands. The tricky part is that each board final test have to be with cooling , otherwise the chips will be burned ,and then it have to be dissembled before shipping. This just eats a lot of time time. The boards are produced and tested for the last couple of days and each of you will be contacted for shipping , according to your shipping instructions. I understand that after months of waiting any day of delay is frustrating , but in the end I think that week to 10 days delay will be top for this GB assembly. Best Martin
|
|
|
|
|