[CLOSED]Minion Chip Assembly GB

[bobsag3]

We have not received the list from Marto yet.

[bboerst]

We have not received the list from Marto yet.

Marto- Can we please get this list sent to Minersource so that shipping can continue?

[bobsag3]

Heres some pics of what we got:





Problem though.
Although the board advertises that it will work with all intel 1150 coolers, it does not. We have tried several coolers so far, and none fit into the mounting holes on the board, or the weird metal brackets included.

[sorehammer]

Not to be a arse but that is not the same configuration as the board I got I have none of those funny cooler mounts.

[Airwhale]

Problem though.
Although the board advertises that it will work with all intel 1150 coolers, it does not. We have tried several coolers so far, and none fit into the mounting holes on the board, or the weird metal brackets included.

bobsag/Matt:

Have you tried the arctic 7s that marto sells on his website?  Does anything fit on those boards?

What is the total % of boards that you have?

Marto:  

Why haven't you sent the list yet?  How much work does it take?  We have been waiting 6-7 weeks beyond what is promised by you... to be held up on this easily sent thing is really, really frustrating.

[sorehammer]

Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.

[marto74]

Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.

No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder.
Yours is with bended sheetmetal and cutted in two plastic holder.
WE came out with this , because cuting and bending of the original parts can lead to some mistakes and troubles.
All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height

[bobsag3]

Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.

No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder.
Yours is with bended sheetmetal and cutted in two plastic holder.
WE came out with this , because cuting and bending of the original parts can lead to some troubles.
All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height

There is a HUGE difference between what is posted on your site : "Intel socet 1150 compatible coller for each chip top"

and

"All Arctic intel coolers"

We have tried several zalman and intel stock coolers, not a single one works.

[marto74]

Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.

No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder.
Yours is with bended sheetmetal and cutted in two plastic holder.
WE came out with this , because cuting and bending of the original parts can lead to some troubles.
All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height

There is a HUGE difference between what is posted on your site : "Intel socet 1150 compatible coller for each chip top"

and

"All Arctic intel coolers"

We have tried several zalman and intel stock coolers, not a single one works.

height?
Give me the exact model you choose and I'll will get one localy and make adapter for you

[bobsag3]

Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.

No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder.
Yours is with bended sheetmetal and cutted in two plastic holder.
WE came out with this , because cuting and bending of the original parts can lead to some troubles.
All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height

There is a HUGE difference between what is posted on your site : "Intel socet 1150 compatible coller for each chip top"

and

"All Arctic intel coolers"

We have tried several zalman and intel stock coolers, not a single one works.

height?
Give me the exact model you choose and I'll will get one localy and make adapter for you

Its not the height. The mounting points for the heatsinks are way off. Why are the 4 mounting holes around the ASIC not just standard placement 1150 holes?

Neither
http://www.newegg.com/Product/Product.aspx?Item=N82E16835203019&nm_mc=KNC-GoogleAdwords&cm_mmc=KNC-GoogleAdwords-_-pla-_-CPU+Fans+%26+Heatsinks-_-N82E16835203019&gclid=CjwKEAjwnNqgBRDdgOitrZPj6yYSJACM86tDKWiJNVeJNfxJaFlmdyhgT4GU304-cUyk5Hm5uMef4RoCEvnw_wcB
Nor
http://www.newegg.com/Product/Product.aspx?Item=N82E16835118128&cm_re=cnps5x-_-35-118-128-_-Product

Work as tested so far

[marto74]

actualy they are 80mm pitch
We have only one model here localy that we bought and was diferent - it is some evercool.
Anyway with all this troubles with production this is the easy one.
If you pre-bought quontity or have one of a choise , just give the model and I'll adopt it.
best solution from my point of view .
We got arctic freezer 7 from the beginning 3 months back and design it with it.
Honestly never cross checked with other vendors coolers .
Board redesign is not doable solution now.
So we'll produce for you any adapter you will need for free.
My non-bitcoin job is mechanical design and tooling production so it is easy part for me

[y_boonstra]

Martin,

Is it possible to send my batch 1 and batch 2 group nuy orders at the same time without delaying the shipment? my B2 order is only 1 board.

[sorehammer]

But wouldn't all 1150 coolers have the legs in the same place with only a slight variance.

[dogjunior]

actualy they are 80mm pitch
We have only one model here localy that we bought and was diferent - it is some evercool.
Anyway with all this troubles with production this is the easy one.
If you pre-bought quontity or have one of a choise , just give the model and I'll adopt it.
best solution from my point of view .
We got arctic freezer 7 from the beginning 3 months back and design it with it.
Honestly never cross checked with other vendors coolers .
Board redesign is not doable solution now.
So we'll produce for you any adapter you will need for free.
My non-bitcoin job is mechanical design and tooling production so it is easy part for me

I was going to use the ZALMAN CNPS5X. If you can build an adapter for this that would be great. Otherwise I might be able to use zip ties and lock them down this way since it has a clip that would hold down the cooler to the mount.
 

[marto74]

But wouldn't all 1150 coolers have the legs in the same place with only a slight variance.

Yes but we do not use clips , but screws that fit in to treaded holes in the base heatsink.
SO there is no gap while cliping.
Excuse my English here

[marto74]

For the zalman
I have similar model of evercool here that is originally for AMD and circle plastic adapter for Intel.
I'll try to make a set of 8 sheetmetal brackets with hinge for the AMD style attachment and ship it to minersource for testing  witht he next sending

[y_boonstra]

INTEL 1155 and 1150



INTEL 2011



Looks like a mistake Martin.. 80mm hole spacing is the same as a socket 2011 cooler

[sorehammer]

Damn not good from the specs that would make them socket 2011 not 1150

[sorehammer]

Well i almost bought a lot of coolers that weren't artic but since i was able to get a deal from Pistachio here he saved my ass. He may still have some left if other need them, in the mean time i got 400gh worth of antminers for about 120$ and they've been pumping away .

i just got a antminer also for some extra ghs

[Qeu]

LGA1150, LGA1155, LGA1156, all have 75mm distance between the socket holes.   All coolers made for these sockets use the 75 mm. did you use an AMD frame from the Arctic Cooling Freezer 7 Pro's box to determine your holes?

I see no updates in my technobit account regarding shipping, which would happen Friday or today?Any tracking code to share?

I have 48 of these I need adaption for, http://www.pugetsystems.com/parts/CPU-Cooling/Stock-Intel-115x-CPU-Fan-6414,
32 of these http://www.deepcool.com/product/cpucooler/2013-12/7_120.shtml

Bobsag3, still nobody available to tell me by pm where that refund check went/is now?