[ANN] CapitalCoin | CPTL | 0% PreMine | First Moores Law PoW/PoS | ON - EXCHANGE

[Lima99]

When the exit to BITtrex is planned?

The only reason why we are not on BITtrex is because there is not much following for the Coin. The last they informed me was that they were going to keep and eye out if they see that the coin start gaining momentum that they will list the coin back in their exchange.

[Lima99]

Everyone needs to make sure that they are on the correct fork
https://bitcointalk.org/index.php?topic=683450.msg7966986#msg7966986
There was some code change in order to stop all the orphan blocks and issue the blockchain was having. But it looks like not everyone upgraded in time and the coin forked.
Follow the steps above and verify that you get back in sync with the official block explorer if you are not already.
http://capitalcoin.minepools.net:12570/chain/CapitalCoin

Bump

[AlexAce420]

Everyone needs to make sure that they are on the correct fork
https://bitcointalk.org/index.php?topic=683450.msg7966986#msg7966986
There was some code change in order to stop all the orphan blocks and issue the blockchain was having. But it looks like not everyone upgraded in time and the coin forked.
Follow the steps above and verify that you get back in sync with the official block explorer if you are not already.
http://capitalcoin.minepools.net:12570/chain/CapitalCoin

Done this three times and my coins aren't showing up.... Keep saying 257332 blocks, but the block explorer doesn't even go that high. Is there something wrong with the bootstrap file?

[Lima99]

Ok
Because you're  on a higher number than the explorer unfortunately you will need to download the blockchain again.

But This time use this as your CapitalCoin.conf (change the RPC user and password.)

 

Code:

rpcuser=SomeUser
rpcpassword=SomePassword
rpcallowip=127.0.0.1
rpcport=22133
port=22033
daemon=1
server=0
listen=0
dnsseed=0
noirc=1
maxconnections=1
connect=31.220.51.2

That will make your client only connect to the block explorer and it should not try to connect to any other node.
Once your are back in sync  then go back to using the CapitalCoin.conf on the OP

Edit- I'm in the process of uploading a new bootstrap file, that should be higher than where the fork happened.

[AlexAce420]

Ok
Because you're  on a higher number than the explorer unfortunately you will need to download the blockchain again.

But This time use this as your CapitalCoin.conf (change the RPC user and password.)

 

Code:

rpcuser=SomeUser
rpcpassword=SomePassword
rpcallowip=127.0.0.1
rpcport=22133
port=22033
daemon=1
server=0
listen=0
dnsseed=0
noirc=1
maxconnections=1
connect=31.220.51.2

That will make your client only connect to the block explorer and it should not try to connect to any other node.
Once your are back in sync  then go back to using the CapitalCoin.conf on the OP

Edit- I'm in the process of uploading a new bootstrap file, that should be higher than where the fork happened.

Syncing....

The blocks look like they're fixed, however I won't know completely until it finishes. I'll keep you updated.

Also thanks alot for the quick support.

[Lima99]

Great,

Ok I found the issue
Pool is on the Wrong Chain: ==> Multi-Pool.eu

But also I am a little concern about
https://cptl.brblocks.com.br/
As their find block cron is not running, so pay-outs are not being sent.

[AlexAce420]

Great,

Ok I found the issue
Pool is on the Wrong Chain: ==> Multi-Pool.eu

But also I am a little concern about
https://cptl.brblocks.com.br/
As their find block cron is not running, so pay-outs are not being sent.

I've been mining on cptl.brbblocks.com.br for about a week now. I've had one payout go through but yeah, all my coins have been staying unconfirmed.

[AlexAce420]

Ok
Because you're  on a higher number than the explorer unfortunately you will need to download the blockchain again.

But This time use this as your CapitalCoin.conf (change the RPC user and password.)

 

Code:

rpcuser=SomeUser
rpcpassword=SomePassword
rpcallowip=127.0.0.1
rpcport=22133
port=22033
daemon=1
server=0
listen=0
dnsseed=0
noirc=1
maxconnections=1
connect=31.220.51.2

That will make your client only connect to the block explorer and it should not try to connect to any other node.
Once your are back in sync  then go back to using the CapitalCoin.conf on the OP

Edit- I'm in the process of uploading a new bootstrap file, that should be higher than where the fork happened.

Syncing....

The blocks look like they're fixed, however I won't know completely until it finishes. I'll keep you updated.

Also thanks alot for the quick support.

The syncing just finished! Guess what!



Finally received my first payout!

**EDIT

The error you see on the bottom of the wallet is now gone.

[Lima99]

Issue with

https://cptl.brblocks.com.br/

Now resolve you should start receiving payments.


Please continue mining and remember to donate

[BillTech]

checkpoint too old errors back

[Burninj]

Anyway to have features from other coin for this one, like anon and co?

[akk123]

Issue with

https://cptl.brblocks.com.br/

Now resolve you should start receiving payments.


Please continue mining and remember to donate

Pool needs fixing cron job again.

[AlexAce420]

Yup, pool needs to be fixed again. =3

[sixteendigits]

I noticed this coin and it's ultra low difficulty and thought it would be fun to solo for a bit.  One problem I see is apparently this coin has been ultra low difficulty for too long, and the planned effect of moore's law + high power ASICs never really happened.  So there is a limit of 100 million coins, but nearly 73 million have already been mined.  At the rate coins are coming out at this difficulty, that limit of 100 million will be hit fast.  Unless this can quickly skyrocket to a multi-gigahash network and stay there, I don't see how this will not require a fork to increase the total number of coins or reduce the reward, most likely a combination of both.

[Bonez58]

Why would my wallet, which has been OPEN and mining PoS for some time now, suddenly be Out of Synch with the network?
It has been like this for several (more than 6) hours and it doesn't seem to be catching up.
This has happened on two wallets on different machines?
Very confusing 

[CryptoSkills]

THE FIRST 10 MINERS WILL GET FREE CPTL WHEN THE FIRST BLOCK WILL BE FOUND! ONLY 0.5% FEE!!!





    Low 0.5% fees!!
    High performance Node.js backend
    User friendly mining client
    Multi-coin Pool
    24/7 Support
    No registration needed! Point your miners to our pool, set your own address and start getting payout every 20 seconds!

    EU based
    DDOS protected

    Under constant improvements for your mining pleasure!

    Why choose a NOMP pool?

   1) It's Safer than a normal Pool. Cause you do not need to give any personal info such email or passwords.

    2) It's faster: point your miners, set your address in your miner config and earn coind immediately with auto payouts every 30 seconds!

    3) It's lighter for your internet connection than normal MPOS pool.

    Are you still waiting to mine on http://pools.cryptoskills.com/  ??

Quick Guide how to mine on CRYPTOSKILLS POOLS (without even entering the website!!)

Configuration:

Username: your CapitalCoin wallet address

Password: anything (could be a letter or number or whatever you want)

Algorithm: scrypt

URL (difficulty 0.001): stratum+tcp://pools.cryptoskills.com:3009 -->Little Miners
URL (Vardiff 8 ): stratum+tcp://pools.cryptoskills.com:3033
URL (difficulty 256): stratum+tcp://pools.cryptoskills.com:3257--> Bigger Miners

THE FIRST 10 MINERS WILL GET FREE CapitalCoin WHEN THE FIRST BLOCKs WILL BE FOUND!

[CryptoSkills]

Great,

Ok I found the issue
Pool is on the Wrong Chain: ==> Multi-Pool.eu

But also I am a little concern about
https://cptl.brblocks.com.br/
As their find block cron is not running, so pay-outs are not being sent.

I've been mining on cptl.brbblocks.com.br for about a week now. I've had one payout go through but yeah, all my coins have been staying unconfirmed.

Check out http://pools.cryptoskills.com !

We just opened a pool for CapitalCoin, point some hashes there!

[Bonez58]

Check out http://pools.cryptoskills.com !

We just opened a pool for CapitalCoin, point some hashes there!

For me, these pools show Dead  

[CryptoSkills]

Check out http://pools.cryptoskills.com !

We just opened a pool for CapitalCoin, point some hashes there!

For me, these pools show Dead  

What you mean sorry?

Our pool's daemon is just downloading the chain, at 80% . Finishing in a couple of minutes and will be ready!

[CryptoSkills]

Now we're up and running!