[ANN][RVC] / RevoCoin / POS - POW / 10,000kh miner limit / LAUNCH 22-07

[Amph]

lol with the new update of djm34 i'm doing 10300 kh/s...for just 300 i need to disable one card or return to the last update

[deke]

Deposits from Maxminers to C-Cex not working again. I'm waiting 1 hour - still nothing.
Tx id: f0852f2c7005fb2422a66596a418c678142a4793908950d2b123e41a8263e7cf

[MaxMinersNet]

Deposits from Maxminers to C-Cex not working again. I'm waiting 1 hour - still nothing.
Tx id: f0852f2c7005fb2422a66596a418c678142a4793908950d2b123e41a8263e7cf

We can see your tx on the block chain through the block explorer, so its up to c-cex...

[rvccoin]

Deposits from Maxminers to C-Cex not working again. I'm waiting 1 hour - still nothing.
Tx id: f0852f2c7005fb2422a66596a418c678142a4793908950d2b123e41a8263e7cf

We can see your tx on the block chain through the block explorer, so its up to c-cex...

Didn't found problems with the wallet. I hope c-cex will reply soon.

[deke]

We can see your tx on the block chain through the block explorer, so its up to c-cex...

Of course, I have checked tx with block explorer. All previous deposits have been credited within 5 minutes.

[cisahasa]

what about the 280x hashrate? is 2.2 mhs fair?

miner,kernel, any specs..

[Bojcha]

what about the 280x hashrate? is 2.2 mhs fair?

miner,kernel, any specs..

posted all few pages ago.

[bbr]

what about the 280x hashrate? is 2.2 mhs fair?

miner,kernel, any specs..

i'm guessing they are using 14.6 drivers which increases the hash rate of x11/x13/x15 etc. I couldn't get 14.6 to work as it kept crashing my comp, no matter what settings i put in the .bat. Probably because I have undervolted my cards.

So, a work around was to stick with 14.4 drivers and then copy the opencl drivers from the 14.6 RC2 release into the sgminer folder. This increased my hash per card from 2.2 to 2.5 - nowhere near the 2.9 that Bojcha is getting but I would suspect that they have not undervolted.

[go6ooo1212]

lol with the new update of djm34 i'm doing 10300 kh/s...for just 300 i need to disable one card or return to the last update

Rig of 6 x 750TI right
I have the exact "Issue" , above 1,8 Mh/s per card

[Tam222]

Revo.SwissPool.Org will not let you create any new accounts!!!!


You can create an account but they never send you the email to verify and unlock it for first login. I Created account. Waited 30 minutes checking and re-checking my email, then created second "test" account with different email. It has been over an hour now and neither email account has received account creation mail from that pool...

PLEASE HELP!!!!

Swiss doesn't need a verify email. try logging in

[alphateam]

lol with the new update of djm34 i'm doing 10300 kh/s...for just 300 i need to disable one card or return to the last update

try lowing intensity by one

[ocminer]

Revo.SwissPool.Org will not let you create any new accounts!!!!


You can create an account but they never send you the email to verify and unlock it for first login. I Created account. Waited 30 minutes checking and re-checking my email, then created second "test" account with different email. It has been over an hour now and neither email account has received an account verification mail from that pool...


PLEASE HELP!!!!

From suprnova they always get stuck in spam boxes.. and hotmail mostly does not work at all.. try different mail addresses and look in your spamfolder

[Hatch]

Revo.SwissPool.Org will not let you create any new accounts!!!!


You can create an account but they never send you the email to verify and unlock it for first login. I Created account. Waited 30 minutes checking and re-checking my email, then created second "test" account with different email. It has been over an hour now and neither email account has received account creation mail from that pool...

PLEASE HELP!!!!

Swiss doesn't need a verify email. try logging in

DIRECT QUOTE;

"Unable to login: Account locked. Please Check your Email for instructions to unlock."

[Bojcha]

what about the 280x hashrate? is 2.2 mhs fair?

miner,kernel, any specs..

i'm guessing they are using 14.6 drivers which increases the hash rate of x11/x13/x15 etc. I couldn't get 14.6 to work as it kept crashing my comp, no matter what settings i put in the .bat. Probably because I have undervolted my cards.

So, a work around was to stick with 14.4 drivers and then copy the opencl drivers from the 14.6 RC2 release into the sgminer folder. This increased my hash per card from 2.2 to 2.5 - nowhere near the 2.9 that Bojcha is getting but I would suspect that they have not undervolted.

will tell you secret. i actually use 13.12 drivers and 14.6rc2 installed on top of it.
i generate bin with 14.6 and then roll back to 13.12. and all works much better.
when i need 14.6 i just update driver from device manager. switching between drivers is less then 10 sec.

[rvccoin]

Revo.SwissPool.Org will not let you create any new accounts!!!!


You can create an account but they never send you the email to verify and unlock it for first login. I Created account. Waited 30 minutes checking and re-checking my email, then created second "test" account with different email. It has been over an hour now and neither email account has received account creation mail from that pool...

PLEASE HELP!!!!

Swiss doesn't need a verify email. try logging in

DIRECT QUOTE;


"Unable to login: Account locked. Please Check your Email for instructions to unlock."

Please contact Swisspool directly or try a different pool.

[bbr]

what about the 280x hashrate? is 2.2 mhs fair?

miner,kernel, any specs..

i'm guessing they are using 14.6 drivers which increases the hash rate of x11/x13/x15 etc. I couldn't get 14.6 to work as it kept crashing my comp, no matter what settings i put in the .bat. Probably because I have undervolted my cards.

So, a work around was to stick with 14.4 drivers and then copy the opencl drivers from the 14.6 RC2 release into the sgminer folder. This increased my hash per card from 2.2 to 2.5 - nowhere near the 2.9 that Bojcha is getting but I would suspect that they have not undervolted.

will tell you secret. i actually use 13.12 drivers and 14.6rc2 installed on top of it.
i generate bin with 14.6 and then roll back to 13.12. and all works much better.
when i need 14.6 i just update driver from device manager. switching between drivers is less then 10 sec.

Sneaky!

You could just place the following files in your sgminer folder from your 14.6 installation folder:

amd_opencl32.dll  (for win 32)
amd_opencl64.dll  (for win 64)
amdocl.dll
amdocl_as32  (for win 32)
amdocl_as64  (for win 64)
amdocl_ld32  (for win 32)
amdocl_ld64  (for win 64)
amdocl64.dll  (for win 64)

Will save the extra step of having to switch drivers.

[Hatch]

Please contact Swisspool directly or try a different pool.

Thanks for the response... I tried contacting them first before trying to get some attention here. Another pool would be great if one could put more than 10k hashes at either one of them...

In any case, I would be really surprised if I am the only one having this issue...




P.S. Just tried logging in to either acount and re-checked both email accounts and spam boxes... STILL NO GO    

[rvccoin]

Please contact Swisspool directly or try a different pool.

Thanks for the response... I tried contacting them first before trying to get some attention here. Another pool would be great if one could put more than 10k hashes at either one of them...

In any case, I would be really surprised if I am the only one having this issue...




P.S. Just tried logging in to either acount and re-checked both email accounts and spam boxes... STILL NO GO   

Why don't you try one of the other pools?

[deke]

Another deposit to c-cex not credited. Damn...

[ocminer]

I just tried to reg there and my mail came within seconds, but into my spam acc. I'm using gmail