[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[fanepatent]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

[1715087370]

1715087370

[1715087370]

1715087370

[Depredation]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

If he's pool mining its fine if there's no shares to submit; it means he didn't hit the pool deadline of 75000.

[Razerglass]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html

[fanepatent]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html

BURST-8NZ9-X6AX-72BK-2KFM2

[burstcoin]

yes. at first start just using 16gb and keeps rising until fills up all memory. maybe im doing something wrong.

when i open 6 miner on 32gb machine memory usage at start 16gb and keeps rising and later fills up all memory. stagger size is 1024. total capacity is 6 tb.

how can i configure windows machine or plots to use less memory?

The actual mining does not consume much memory. Plotting yes.
from the command "run_generate.bat 987654567890987612 0 80000 8000 7" that you are using to start plotting, 8000 represents the stagger size. The number of nonces to generate in a stack (stagger). And one nonce has 256 Kb of space/memory consumed/used
So, if you lower that you will lower the amount of memory needed to plot.

So your saying that you only start the miners and they start using 32 Gb of RAM?

There are 2 aspects to this.

1. edit your mine.bat's -Xmx parameter. Xmx sets the max memory each JVM instance is allowed.

2. Windows 7's prefetching has a tendency to attempt to load and keep in memory large amounts of plot data after it sees you keep reading the same files repeatedly. Ironically it sometimes can try to preload so much that there isn't enough memory left for the miner to actually function, causing instability. If you start mining, see the ram usage increasing, then close the miners and see that most of the memory has not been released, this is likely your issue. I had 2 machines that started fine, then started having stability issues like this, and disabling prefetching fixed both of them immediately. To do this, open the services manager, stop and disable superfetching, then open regedit, go to HKLM/system/currentcontrolset/control/sessionmanager/memory management/prefetchparameters, and set enable prefetch, and enable superfetch to 0. Then reboot

[newuser01]

Look here to see if you are mining on the pool or not

http://178.62.39.204:8121/shares

If your address has shares, you are mining.

[Razerglass]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html

BURST-8NZ9-X6AX-72BK-2KFM2

i enter my passphrase and copy and paste that wallet for recipient

and get this error  {"errorCode":5,"errorDescription":"Unknown account"}

[fanepatent]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html

BURST-8NZ9-X6AX-72BK-2KFM2

i enter my passphrase and copy and paste that wallet for recipient

and get this error  {"errorCode":5,"errorDescription":"Unknown account"}

What version is your wallet?

[Razerglass]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html

BURST-8NZ9-X6AX-72BK-2KFM2

i enter my passphrase and copy and paste that wallet for recipient

and get this error  {"errorCode":5,"errorDescription":"Unknown account"}

What version is your wallet?

1.0.3 do i have to have 1 burst for it to work?
looked on the website and my # isnt on there. does it have to do with it not having shares to submit?

[fanepatent]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html

BURST-8NZ9-X6AX-72BK-2KFM2

i enter my passphrase and copy and paste that wallet for recipient

and get this error  {"errorCode":5,"errorDescription":"Unknown account"}

What version is your wallet?

1.0.3 do i have to have 1 burst for it to work?

Oh. Yes, you do. Give me your address, I'll send you

[burstcoin]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html

BURST-8NZ9-X6AX-72BK-2KFM2

i enter my passphrase and copy and paste that wallet for recipient

and get this error  {"errorCode":5,"errorDescription":"Unknown account"}

What version is your wallet?

1.0.3 do i have to have 1 burst for it to work?
looked on the website and my # isnt on there. does it have to do with it not having shares to submit?

Yes you need 1 burst for the assignment fee. After a few confirmations ~15 minutes your numerical id should show on the pool's allowed users list.

Lastly, you'll need to rename or move your passphrases.txt file. If the miner can find a passphrase, it tries to solo mine instead. If you see deadlines being shown in the miner it is trying to solo.

[redsn0w]

Could anyone from you send me some burst  for test the pool v2 ?

This is my address : BURST-UA4H-FQ2V-6JRK-6JF6B    thanks   .

[fanepatent]

Could anyone from you send me some burst  for test the pool v2 ?

This is my address : BURST-UA4H-FQ2V-6JRK-6JF6B    thanks   .

7 sent to you.

[Razerglass]

does this look right for pool mining? its just sitting there not doing anything else

It shouldn't say that there is no share to submit to pool.  If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden

When I was plotting I didnt always finish the plot so sometime the miner says

Error reading file

Does the miner use the nounces that are available or does it not use that file at all because it's not complete?

If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space



edit: exactly like the person above xD

It still uses the files, you're ok.


Also, just tested and simlinks work.

what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html

BURST-8NZ9-X6AX-72BK-2KFM2

i enter my passphrase and copy and paste that wallet for recipient

and get this error  {"errorCode":5,"errorDescription":"Unknown account"}

What version is your wallet?

1.0.3 do i have to have 1 burst for it to work?

Oh. Yes, you do. Give me your address, I'll send you

cheers! BURST-Q4TR-YKRW-6RAN-EDBC8 you've been an amazing help, friend

ok i renamed it, it was giving a deadline still

after i removed it from the same directory it still says "targetdeadline" 75000 and no valid shares to submit to the pool, am I missing something?

[redsn0w]

Could anyone from you send me some burst  for test the pool v2 ?

This is my address : BURST-UA4H-FQ2V-6JRK-6JF6B    thanks   .

7 sent to you.

Thank you , when I will generate some burst  I will send you back the 7 burst .

[fanepatent]

cheers! BURST-Q4TR-YKRW-6RAN-EDBC8 you've been an amazing help, friend

ok i renamed it, it was giving a deadline still

after i removed it from the same directory it still says "targetdeadline" 75000 and no valid shares to submit to the pool, am I missing something?

And 7 sent to you
And the messages it gives are normal. Chill

edit: thank you for the Doge

[Razerglass]

sweet got the long message i don't care about, thank you for the coin.  so everything looks good. i can finally go to bed. thanks a bunch guys! wonderful community here defiantly will be sticking around goodnight. i look forward to learning more and stacking some HDD's up tommorrow

[fanepatent]

sweet got the long message i don't care about, thank you for the coin.  so everything looks good. i can finally go to bed. thanks a bunch guys! wonderful community here defiantly will be sticking around goodnight. i look forward to learning more and stacking some HDD's up tommorrow

Good night and come back with results

[Vandalay23]

Where are you block 7789?

[redsn0w]

Any new for the generator of plot  in C ? Or nothing else ?