[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[111magic]

Updated the source:

https://github.com/magi-project/magi

Block data:

http://coinmagi.org/bin/block-chain/

Wallet downloads:

http://coinmagi.org/bin/m-wallet-1.4.1/

Changes:

* Update block version to 5 and reject any other versions

* Minimum coin age raise to 8 hours

* Coin maturity to be increased to 500 blocks

* Staking will be default to be disabled unless given "posii=1" in magi.conf

* Updated checkpoints

Here is Joe's post again

[1715575899]

1715575899

[1715575899]

1715575899

[Windozxpert]

In case anyone was wondering where the new wallet is: coinmagi.org/bin/m-wallet-1.4.1/
32 and 64 bit already compiled.  

The download link on the home page still goes to the old wallet.

It's an old version.
The correct one is 1.4.1.1

Oh crap, my bad. Thanks for correction.

Wait.. that's the same link I provided. 1.4.1 That's the correct one, right?

[goldlabel]

So wat version wallet , 1.4.1 or 1.4.1.1 and if its 1.4.1.1 where can we download it

[DisasterFaster]

So wat version wallet , 1.4.1 or 1.4.1.1 and if its 1.4.1.1 where can we download it

It's 1.4.1.1 and it's not downloadable in binary format yet. You would have to compile it.

[DisasterFaster]

I have the new wallet (1.4.1), get it twice to be sure. But, from whatever reason, even if I have 4 connections, wallet refuse to synchronize. It's blocked 2 days ago (block no: 1.446.791). Any advice, greatly appreciated.

Earlier the dev said to use this IP to synch so you could sure give it a try:

addnode=104.128.225.215

[malafaya]

My suggestion for those waiting for a binary of v1.4.1.1:

User ex33s made available the blockchain after the problematic 9 or so blocks [1446792 to 1446800, I believe] at https://poolinfo.systms.org/#magi.
You could try copying that blockchain to your wallet and I suppose v1.4.1 should run well from there on.
This is my not so wild guess but could someone please confirm this works?

[Windozxpert]

So wat version wallet , 1.4.1 or 1.4.1.1 and if its 1.4.1.1 where can we download it

It's 1.4.1.1 and it's not downloadable in binary format yet. You would have to compile it.

Do you use Visual Studio to compile it? Usually there is information on what prereqs. on Github, but there's none provided.

[DisasterFaster]

My suggestion for those waiting for a binary of v1.4.1.1:

ex3ss made available the blockchain after the problematic 9 or so blocks at  https://poolinfo.systms.org/#magi .
You could try copying that blockchain to your wallet and I suppose v1.4.1 should run well from there on.
This is my not so wild guess but could someone please confirm this works?

I tried it and it didn't work.

I also used the IP he provided and also the blockchain but still no luck. Maybe someone else will have better results?

[DisasterFaster]

So wat version wallet , 1.4.1 or 1.4.1.1 and if its 1.4.1.1 where can we download it

It's 1.4.1.1 and it's not downloadable in binary format yet. You would have to compile it.

Do you use Visual Studio to compile it? Usually there is information on what prereqs. on Github, but there's none provided.

Yes I compile with Visual Studio but not alt coins... that is better done on Ubuntu IMHO

[goldlabel]

So wat version wallet , 1.4.1 or 1.4.1.1 and if its 1.4.1.1 where can we download it

It's 1.4.1.1 and it's not downloadable in binary format yet. You would have to compile it.

Oke super great thx, is there anybody who can do this so we can overload that person with many thx

[111magic]

So wat version wallet , 1.4.1 or 1.4.1.1 and if its 1.4.1.1 where can we download it

It's 1.4.1.1 and it's not downloadable in binary format yet. You would have to compile it.

Oke super great thx, is there anybody who can do this so we can overload that person with many thx

Sure Joe will take care of it after he will be back home.

[Redrover]

My suggestion for those waiting for a binary of v1.4.1.1:

ex3ss made available the blockchain after the problematic 9 or so blocks at  https://poolinfo.systms.org/#magi .
You could try copying that blockchain to your wallet and I suppose v1.4.1 should run well from there on.
This is my not so wild guess but could someone please confirm this works?

I tried it and it didn't work.

I also used the IP he provided and also the blockchain but still no luck. Maybe someone else will have better results?

I tried it as well, wallet will not open and throws an error about deleting everything in the folder and trying again.  So I did this and it started downloading the blockchain from scratch, so... I closed it and swapped out the 2 folders and the wallet error'd out again so I swapped back to the original and it's now downloading from scratch again, I'll see if it actually completes.  3% done in about 10 minutes.

I would really like to learn how to compile the wallet (Windows 10).  I'm sure there are a lot of people here who would like to know as well.  Does anyone have step by step instructions on how to do this or a link to somewhere with the instructions?

[malafaya]

My suggestion for those waiting for a binary of v1.4.1.1:

ex3ss made available the blockchain after the problematic 9 or so blocks at  https://poolinfo.systms.org/#magi .
You could try copying that blockchain to your wallet and I suppose v1.4.1 should run well from there on.
This is my not so wild guess but could someone please confirm this works?

I tried it and it didn't work.

I also used the IP he provided and also the blockchain but still no luck. Maybe someone else will have better results?

I tried it as well, wallet will not open and throws an error about deleting everything in the folder and trying again.  So I did this and it started downloading the blockchain from scratch, so... I closed it and swapped out the 2 folders and the wallet error'd out again so I swapped back to the original and it's now downloading from scratch again, I'll see if it actually completes.  3% done in about 10 minutes.

I would really like to learn how to compile the wallet (Windows 10).  I'm sure there are a lot of people here who would like to know as well.  Does anyone have step by step instructions on how to do this or a link to somewhere with the instructions?

Pity... Thank you both for letting us know.

[zekk]

Does anyone know roughly how long the pools have been open?

[111magic]

Does anybody know how long the pools have been open?

Maybe few hours now!
If you like to know exactly check the time they posted.

[malafaya]

Does anyone know roughly how long the pools have been open?

6-7 hours now.

[Redrover]

My suggestion for those waiting for a binary of v1.4.1.1:

ex3ss made available the blockchain after the problematic 9 or so blocks at  https://poolinfo.systms.org/#magi .
You could try copying that blockchain to your wallet and I suppose v1.4.1 should run well from there on.
This is my not so wild guess but could someone please confirm this works?

I tried it and it didn't work.

I also used the IP he provided and also the blockchain but still no luck. Maybe someone else will have better results?

I tried it as well, wallet will not open and throws an error about deleting everything in the folder and trying again.  So I did this and it started downloading the blockchain from scratch, so... I closed it and swapped out the 2 folders and the wallet error'd out again so I swapped back to the original and it's now downloading from scratch again, I'll see if it actually completes.  3% done in about 10 minutes.

I would really like to learn how to compile the wallet (Windows 10).  I'm sure there are a lot of people here who would like to know as well.  Does anyone have step by step instructions on how to do this or a link to somewhere with the instructions?

Ok experimenting mode on...
I got stuck downloading a fresh blockchain, tried ex33s download again and the wallet won't open, so I used Joe's blockchain download and changed my addnodes to connect - that got me to block 1446791 and it got stuck with wallet 1.4.1.0, sooo.... I tried the previous wallet 1.4.0 from this point and it sync'd within a few seconds (along with an error that it's an obsolete wallet).  Closed it and launched the current wallet that I have 1.4.1.0 and it's still sync'd and no errors.  Waiting to see if it stays that way, current block 1446975.

Seems like it might be stuck again, not sure yet.

[Vitalik_Pedik]

ALL working normal on 1.4.1.1
1.4.1 NOT working

[goldlabel]

My suggestion for those waiting for a binary of v1.4.1.1:

ex3ss made available the blockchain after the problematic 9 or so blocks at  https://poolinfo.systms.org/#magi .
You could try copying that blockchain to your wallet and I suppose v1.4.1 should run well from there on.
This is my not so wild guess but could someone please confirm this works?

I tried it and it didn't work.

I also used the IP he provided and also the blockchain but still no luck. Maybe someone else will have better results?

I tried it as well, wallet will not open and throws an error about deleting everything in the folder and trying again.  So I did this and it started downloading the blockchain from scratch, so... I closed it and swapped out the 2 folders and the wallet error'd out again so I swapped back to the original and it's now downloading from scratch again, I'll see if it actually completes.  3% done in about 10 minutes.

I would really like to learn how to compile the wallet (Windows 10).  I'm sure there are a lot of people here who would like to know as well.  Does anyone have step by step instructions on how to do this or a link to somewhere with the instructions?

Ok experimenting mode on...
I got stuck downloading a fresh blockchain, tried ex33s download again and the wallet won't open, so I used Joe's blockchain download and changed my addnodes to connect - that got me to block 1446791 and it got stuck with wallet 1.4.1.0, sooo.... I tried the previous wallet 1.4.0 from this point and it sync'd within a few seconds (along with an error that it's an obsolete wallet).  Closed it and launched the current wallet that I have 1.4.1.0 and it's still sync'd and no errors.  Waiting to see if it stays that way, current block 1446975.

Seems like it might be stuck again, not sure yet.

You need 1.4.1.1

[Redrover]

I have no idea what how or why but I am now still sync'd with poolinfo and suprnova using wallet 1.4.1.0, currently on block 1446984

I'd love to get the current wallet but do not know how to compile it.