Block Erupter Tube Sales Information Thread [Round4, Price at <1btc per TH/s]

[philipma1957]

Hey Blazed, I have a few extra controllers. If you think your controller is bad, I will send you out one I have tested and I know is good.  You gave me a good deal on a miner the other day, I'll hook you up for free.  Just let me know.   It will ship on Tuesday and arrive Wednesday.  

   that is a perfect solution .  nice of you. blazedout419 is a good guy. glad to see someone with a good solution.

[friedcat]

Price adjusted to 7.9 btc per set.

Round 1 purchasers get a coupon of 0.05 btc per device. (0.5 btc per set, 0.0125 btc per hashing unit)

Round 2 purchasers bought at the price before price adjustment get refunds of the price difference, preferrably to the payment source address.

All coupons and refunds happen only between our direct purchasers and us.

[WBF1]

I was having issues earlier connecting to slush with one, but it's working beautifully through the modified ckpool proxy. Might try again later and see what was up.

Is this proxy available for download?

also wondering this. using BFGminer as proxy gives me particularly high reject rates (although that could be some settings I need to change?).

He posted the link to it earlier.

https://bitbucket.org/ckolivas/ckpool

He's running ckpool in standalone proxy mode.

Use the code directly from bit bucket or is there modified code base?

[Tigggger]

Price adjusted to 7.9 btc per set.

That price is getting tempting, but for me with high power rates they aren't really economical to run and if diff increases 45% from where we are now they cost more to run than they make and it isn't going to be long until the diff is that high so almost certainly a losing proposition.

Are there any plans to offer tubes/chips/new machines undervolted in the same way as Bitmain did with the S2 as this would give a much longer lifespan or is this the best w/GH that the chips can do ?

[-ck]

He posted the link to it earlier.

https://bitbucket.org/ckolivas/ckpool

He's running ckpool in standalone proxy mode.

Use the code directly from bit bucket or is there modified code base?

Directly. It sanitises to slush stratum based pools only, though there are quite a few of those.

[WBF1]

He posted the link to it earlier.

https://bitbucket.org/ckolivas/ckpool

He's running ckpool in standalone proxy mode.

Use the code directly from bit bucket or is there modified code base?

Directly. It sanitises to slush stratum based pools only, though there are quite a few of those.

OK I'm giving it a shot.

In standalone proxy does it failover upstream?

[sidehack]

Looks like you can set a failover, but it doesn't revert. If your first pool goes down it switches to the second, but it doesn't periodically check the first for activity and switch back if it comes online.

[Adrian-x]

Another half-dozen on their way. Reselling these looks sketchy so I may as well run them into dust.

http://www.bhphotovideo.com/c/product/1012719-REG/evga_120_g2_1300_xr_supernova_1300_g2_power.html
$189.99 Free shipping

i was looking at the same PSU - note: it's available on newegg http://www.newegg.com/Product/Product.aspx?Item=N82E16817438011  and they accept bitcoin with a $30 rebate.  

Yeah I got one from newegg last week, also microcenter had $30.00 rebate, BUT!!  you can only get 1 rebate regardless of store you buy from  . So if you have already used your 1-shot, B&H have lowest un-rebated price and free shipping.

I am attempting to power 5 - Tubes with 4 evga 1300 G2..  fingers crossed!

so got my PSY's on Saturday 3 total, I'm pulling between 1116-1125 per PSU and running 16 boards on 8 tubes. 3360 Wats, for 3.2TH/s - standard settings,

PS it took me a day to find out how to turn on the PSU's, you need to plug in the motherboard cable with the loop wire.

the last time i was mining I had 2GH/s, what a jump.

[-ck]

Looks like you can set a failover, but it doesn't revert. If your first pool goes down it switches to the second, but it doesn't periodically check the first for activity and switch back if it comes online.

No, indeed not. For the time being the failover mechanism in ckproxy is the equivalent of the "round robin" in cgminer.

[BANK RUN]

2. We now offer the shipping of fully assembled devices. If you need them to be shipped as a whole please specify
in your order. We still prefer separate shipping though, because it will reduce the potential shipping damage significantly.

Is it the the same price if they're assembled or not ?

[helipotte]

Trying to use this with Bfgminer as a proxy.  Badly designed controller locks up/ can't use web interface to reconfigure.  Every time there is a new block

found on network this happens (lockup).  Is there ANY way to reset this thing remotely?  Web interface simply stops working.

PLEASE UPDATE THE CONTROLLER FIRMWARE TO NOT NEED A PROXY FOR ALL POOLS EXCEPT GHASH.IO!

Device is well designed and hardware is great but the included software is awful.

[WBF1]

Looks like you can set a failover, but it doesn't revert. If your first pool goes down it switches to the second, but it doesn't periodically check the first for activity and switch back if it comes online.

No, indeed not. For the time being the failover mechanism in ckproxy is the equivalent of the "round robin" in cgminer.

Does the ckpool web interface offer anything when running as proxy? If so is there a guide on setting it up?

[friedcat]

Coupon rule:

For each device purchased, you get a 0.05 btc coupon. The price of each new purchased device can only be reduced by one coupon. Coupon works not only for round 2 sales, but also all future devices that are priced at more than 0.05 btc each.

[sjc1490]

Coupon rule:

For each device purchased, you get a 0.05 btc coupon. The price of each new purchased device can only be reduced by one coupon. Coupon works not only for round 2 sales, but also all future devices that are priced at more than 0.05 btc each.

FC I have been trying to get a hold of you, I bought 2 from Canary and one has a board that only hashes 157 of the expected 205 and is showing a bad chain (---) can you help me RMA. Would like to pu a couple more but want to get this RMA issue handled first. Canary said to go through you. Thanks.

[Blazed]

Coupon rule:

For each device purchased, you get a 0.05 btc coupon. The price of each new purchased device can only be reduced by one coupon. Coupon works not only for round 2 sales, but also all future devices that are priced at more than 0.05 btc each.

FC I have been trying to get a hold of you, I bought 2 from Canary and one has a board that only hashes 157 of the expected 205 and is showing a bad chain (---) can you help me RMA. Would like to pu a couple more but want to get this RMA issue handled first. Canary said to go through you. Thanks.

I also need to RMA my ethernet controller (bought in Canary's group buy) how do i proceed?

[philipma1957]

to chip in here. friedcat this is pretty decent gear.

 most of us have purchased thousands of dollars in gear from you. Last year I purchased more then 1000 erupters from canary. 20 blades and 4-6 cubes.
please handle the rma's quickly and please update the firmware for the controllers'

[bolehvpn]

If anyone wants a video tutorial of almost all the steps to build an ASICMiner Tube I recorded my process. Hope it helps It talks about all the little quirks and stuff and things to watch out for so you don't have to learn the hard way.

http://youtu.be/zEL5EKWwBx0

[philipma1957]

If anyone wants a video tutorial of almost all the steps to build an ASICMiner Tube I recorded my process. Hope it helps It talks about all the little quirks and stuff and things to watch out for so you don't have to learn the hard way.

http://youtu.be/zEL5EKWwBx0

 

Thanks I will watch it on Monday.

[BANK RUN]

2. We now offer the shipping of fully assembled devices. If you need them to be shipped as a whole please specify
in your order. We still prefer separate shipping though, because it will reduce the potential shipping damage significantly.

Is it the the same price if they're assembled or not ?

[shawshankinmate37927]

2. We now offer the shipping of fully assembled devices. If you need them to be shipped as a whole please specify
in your order. We still prefer separate shipping though, because it will reduce the potential shipping damage significantly.

Is it the the same price if they're assembled or not ?

It appears that pre-assembled hardware costs an extra BTC.183.  See cost breakdown here.