ASICMiner Tube Group Buy #2

[CanaryInTheMine]

CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.

Here's the response from ASICMiner:

"its 12V 1A,     2.1mm  (actually 2.5mm is also available ,its compatible)"

This is for the ethernet controller?

Yes.  You could get an adapter from 6 pin pcie to barrel or from molex to barrel. Buyahash store sells them and you can always make your own and run from the same PSU powering the Tube.
You may also have an adapter from a switch/router etc... As long as it's 12 v out, minimum 1amp.

based on all info we have available, yes.  as long as the molex you are connecting to provides 1 amp minimum.

presumably this was the right part: https://buyahash.com/shop/molex-4-pin-gridseed-power-plug-2-1mm-dc-barrel-plug/

??

[CanaryInTheMine]

Is this GB over?  I sent payment on the 16th, did I miss the deadline?

Thanks!

Nope, you're good.  My order to fc went in by 16th.

I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL.
So I expect these in a few days after DHL number is provided.

How many you ordered ?

enough for a good size group.

[CanaryInTheMine]

How many extra units do you have coming & available left to buy for the GB?

Also, i hate to be the one to ask, but what's in it for you with this group buy? You don't seem to be marking them up any, are you just trying to get around the MOQ for an order from them?  This forum has turned me into a cynic.

there's plenty available.  the title is still OPEN, so you can order more.
when my inventory depletes, I will post that here, so that it will be clearly communicated.

[CanaryInTheMine]

FC and Co. have shipped.  Awaiting their arrival.  Will post again once I see customs have cleared.

there are still plenty available if anyone want to order more.  Keep in mind, that the btc/usd has made it cheaper for you to spend dollars to buy the 1.04 btc (about $493 on coinbase).

[daddyfatsax]

FC and Co. have shipped.  Awaiting their arrival.  Will post again once I see customs have cleared.

there are still plenty available if anyone want to order more.  Keep in mind, that the btc/usd has made it cheaper for you to spend dollars to buy the 1.04 btc (about $493 on coinbase).

Good to know. Looking forwarding to getting rid of my pain in the ass Bitfury rigs.

[Swimmer63]

Just reading through Dogie's guide to be sure I am up to speed on everything prior to arrival. 
The Hashratio version of the miner has the default ip address as 192.168.0.254:8000 out of the box.
I note this because most routers in the US have 192.168.1......
Therefore we'll have to do some ip address gymnastics to get them talking to our router.  Instructions are in Dogie's guide, but it can be confusing to the ip challenged.
Then again, maybe FC's are coming with different defaults.

[TheJuice]

Just reading through Dogie's guide to be sure I am up to speed on everything prior to arrival. 
The Hashratio version of the miner has the default ip address as 192.168.0.254:8000 out of the box.
I note this because most routers in the US have 192.168.1......
Therefore we'll have to do some ip address gymnastics to get them talking to our router.  Instructions are in Dogie's guide, but it can be confusing to the ip challenged.
Then again, maybe FC's are coming with different defaults.

My dlink router defaults to the 0 ip. Thanks for the heads up.

[CanaryInTheMine]

Just reading through Dogie's guide to be sure I am up to speed on everything prior to arrival. 
The Hashratio version of the miner has the default ip address as 192.168.0.254:8000 out of the box.
I note this because most routers in the US have 192.168.1......
Therefore we'll have to do some ip address gymnastics to get them talking to our router.  Instructions are in Dogie's guide, but it can be confusing to the ip challenged.
Then again, maybe FC's are coming with different defaults.

As manufacturers of miners and routers continue to release hw preconfigured to different subnets in the 192.168.0.0/16 address space (or others), the best skill to learn is how to assign secondary IPs to your workstation so that you can reach different subnets and not care about changing your router etc...

[sidehack]

What would be the cost of four Tubes and one controller? Looks like 3.953BTC?

[CanaryInTheMine]

What would be the cost of four Tubes and one controller? Looks like 3.953BTC?

It would be 1.04 x 4
I ordered units with a 1:1 in mind

[sidehack]

Alright, so no controller break. Got a guy asking me to broker a 4-Tube purchase straight into hosting so needing the price for that. I'll let him know.

4.16BTC sent, ID e69383f5853bb99974f45b2a1ce135f2c11c7fd70988f6e1eb9783720601fae9-000

I now have 5 on order. I have better luck with FedEx than USPS for online, let me know if that's a possibility for shipping.

[CanaryInTheMine]

Alright, so no controller break. Got a guy asking me to broker a 4-Tube purchase straight into hosting so needing the price for that. I'll let him know.

4.16BTC sent, ID e69383f5853bb99974f45b2a1ce135f2c11c7fd70988f6e1eb9783720601fae9-000

I now have 5 on order. I have better luck with FedEx than USPS for online, let me know if that's a possibility for shipping.

fedex is fine.

[dance191]

This looks like a good product, 1.04 sent for 1.  TX 17790d46d1f775a2c0017d15bdccca537253d1fb7086906cce1400eb5e634693

Thanks CanaryInTheMine!

[dance191]

By the way, do you have any idea how long they might last?  Any ideas when you might run out?

[Jesehl]

Anyone who can help me create a label to Philippines??

[CanaryInTheMine]

By the way, do you have any idea how long they might last?  Any ideas when you might run out?

I will post when I begin running out of them

[Finksy]

Disregard, figured out how to create pre-paid international labels.

BTC1.04 sent, txid 2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

[philipma1957]

By the way, do you have any idea how long they might last?  Any ideas when you might run out?

I will post when I begin running out of them

Thinking  about ordering 1 more so when will this arrive at your place Wed or Thur ?

[NoTToN]

Anyone who can help me create a label to Philippines??

+1

[WBF1]

Welp, I'm in for a second. Time to decommission and sell off my GPU rigs.