CanaryInTheMine (OP)
Donator
Legendary
 Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
 |
August 17, 2014, 12:35:23 PM |
|
CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.
Here's the response from ASICMiner: "its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)" |
|
|
|
|
|
TheJuice
|
|
August 17, 2014, 02:41:27 PM |
|
CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.
Here's the response from ASICMiner: "its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)" I believe that is the standard barrel size for most connectors. Thanks for pointing this out. Need to go dig one up. |
|
|
|
|
|
helipotte
|
|
August 17, 2014, 04:31:57 PM |
|
Is this GB over? I sent payment on the 16th, did I miss the deadline?
Thanks!
|
|
|
|
|
|
WBF1
|
|
August 17, 2014, 05:01:21 PM |
|
CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.
Here's the response from ASICMiner: "its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)" This is for the ethernet controller? |
|
|
|
|
|
stompysteve
|
|
August 17, 2014, 05:08:55 PM |
|
I need to get my power costs down before I buy one, electric bill is already to high  |
|
|
|
|
kp5995
Newbie
Offline
Activity: 36
Merit: 0
|
|
August 17, 2014, 07:07:18 PM |
|
Are there any left in this GB
|
|
|
|
|
|
TheJuice
|
|
August 17, 2014, 08:09:33 PM |
|
CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.
Here's the response from ASICMiner: "its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)" This is for the ethernet controller? No. it's one of these: http://www.amazon.com/Power-Adapter-Supply-1000ma-Quality/dp/B005JRGOCMthe chips are powered by a psu, but the controller in powered by above. |
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
August 17, 2014, 08:42:49 PM |
|
CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.
Here's the response from ASICMiner: "its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)" This is for the ethernet controller? Yes. You could get an adapter from 6 pin pcie to barrel or from molex to barrel. Buyahash store sells them and you can always make your own and run from the same PSU powering the Tube. You may also have an adapter from a switch/router etc... As long as it's 12 v out, minimum 1amp. |
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
August 17, 2014, 08:43:54 PM |
|
Are there any left in this GB
Yes, it's still open |
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
August 17, 2014, 08:45:15 PM |
|
I need to get my power costs down before I buy one, electric bill is already to high Turn off GPUs or any other less efficient (than this device) mining equipment.  |
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
August 17, 2014, 08:47:15 PM |
|
Is this GB over? I sent payment on the 16th, did I miss the deadline?
Thanks!
Nope, you're good. My order to fc went in by 16th. I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL. So I expect these in a few days after DHL number is provided. |
|
|
|
|
|
sjc1490
|
|
August 17, 2014, 09:52:57 PM |
|
Is this GB over? I sent payment on the 16th, did I miss the deadline?
Thanks!
Nope, you're good. My order to fc went in by 16th. I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL. So I expect these in a few days after DHL number is provided. On the label do you think a large USPS Flat Rate box (square type) will work or should I wait till you have had a chance to put eyes on it? Thanks. |
BTC ADDRESS: 12Qwd8VKLQ4xF44ytHXBpCAKuF9VknG4X2
|
|
|
cesarm
Member
Offline
Activity: 92
Merit: 10
|
|
August 17, 2014, 11:48:41 PM |
|
Is this GB over? I sent payment on the 16th, did I miss the deadline?
Thanks!
Nope, you're good. My order to fc went in by 16th. I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL. So I expect these in a few days after DHL number is provided. How many you ordered ? |
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4298
Merit: 8793
'The right to privacy matters'
|
|
August 18, 2014, 12:04:15 AM |
|
Is this GB over? I sent payment on the 16th, did I miss the deadline?
Thanks!
Nope, you're good. My order to fc went in by 16th. I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL. So I expect these in a few days after DHL number is provided. On the label do you think a large USPS Flat Rate box (square type) will work or should I wait till you have had a chance to put eyes on it? Thanks. he is letting us wait on the labels. it may not get into a large . may need other packing. if you are close to him it fits in a usps region c box but that is expensive unless you are close. he is in Illinois I am in NJ and a regional c is 33 dollars. IIRC I am hoping he can fit it in a smaller box. may fit into 2 regional b's  |
|
|
|
|
sjc1490
|
|
August 18, 2014, 12:14:16 AM |
|
Thanks, I am in TN so a regional box might be the way to go. Just one miner but thinking of adding another tomorrow if he is still accepting.
|
BTC ADDRESS: 12Qwd8VKLQ4xF44ytHXBpCAKuF9VknG4X2
|
|
|
Finksy
Legendary
Offline
Activity: 1022
Merit: 1003
|
|
August 18, 2014, 02:09:18 AM |
|
How many extra units do you have coming & available left to buy for the GB? Also, i hate to be the one to ask, but what's in it for you with this group buy? You don't seem to be marking them up any, are you just trying to get around the MOQ for an order from them? This forum has turned me into a cynic.  |
|
|
|
|
firejuan
|
|
August 18, 2014, 02:35:58 AM
Last edit: August 18, 2014, 04:36:31 AM by firejuan |
|
How many extra units do you have coming & available left to buy for the GB? Also, i hate to be the one to ask, but what's in it for you with this group buy? You don't seem to be marking them up any, are you just trying to get around the MOQ for an order from them? This forum has turned me into a cynic. You have barely been around a month. This place CAN be a cesspool if you don't filter out the right people and avoid scams. I learned that the hard way. Yes, I got taken for ~$2,400 so make sure to stick with well known sellers such as Canary and avoid to good to be true deals because they are truly not true. Speaking of trusted sellers...do you have any extra units, Canary, or will you be placing another order? I sat on the fence to long. |
|
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4298
Merit: 8793
'The right to privacy matters'
|
|
August 18, 2014, 03:54:56 AM |
|
How many extra units do you have coming & available left to buy for the GB? Also, i hate to be the one to ask, but what's in it for you with this group buy? You don't seem to be marking them up any, are you just trying to get around the MOQ for an order from them? This forum has turned me into a cynic. canary in the mine has sold close to 1 million usd in gear on this site. I purchased thousands of dollars in gear from him. he is pretty honest guy. and he sells to make some money. so most likely he has done a markup which is how a reseller does business. |
|
|
|
|
WBF1
|
|
August 18, 2014, 01:33:07 PM |
|
CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.
Here's the response from ASICMiner: "its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)" This is for the ethernet controller? Yes. You could get an adapter from 6 pin pcie to barrel or from molex to barrel. Buyahash store sells them and you can always make your own and run from the same PSU powering the Tube. You may also have an adapter from a switch/router etc... As long as it's 12 v out, minimum 1amp. presumably this was the right part: https://buyahash.com/shop/molex-4-pin-gridseed-power-plug-2-1mm-dc-barrel-plug/?? |
|
|
|
|
|
