[SSD] Sonic - 1st TOR with functional anon send - Steganography based Anon App

[crazywack]

Hey guys, if you have a wallet not open, fire that bad boy up and help us stake and move the chain a bit.

Arg needs more connections for a bootstrap.


Side note, the block explorer is back up and synced.

[BrotherJ]

I have my wallet up and running but it seems I'm the only one. 

[argakiig]

I have my wallet up and running but it seems I'm the only one. 

perhaps you should check the explorer and bittrex before you say your the only one.
will have a new build set and bootstrap for anyone having issues with syncing before too long. I did a check of the network, and it would appear we still have people on v 2.0.0. Yall should be way past that by now just saying.

Anyways. Back to it. Talk later yall

[MR1]

I have my wallet up and running but it seems I'm the only one. 

U can check the number of connections for every coin traded on Bittrex here:

https://bittrex.com/status

[BrotherJ]

I guess what I should have said is that it appears that I'm the only one, or one of few, staking. (Minting. Your weight is 4705964. Network weight is 1089. Expected time to earn interest is 0 seconds)  I am using the latest version 2.1 and have no issues connecting or staking. I am a long time investor (from the beginning) and I run my wallet on a very regular basis although I cannot run it 24/7. If there is anything I can do to help others  get connected let me know. I am here to support the community in any way I can and I believe in your project argakiig.  


Sorry fellas, but I have to shut my wallet down until later this evening.

[TimC]

I guess what I should have said is that it appears that I'm the only one, or one of few, staking. (Minting. Your weight is 4705964. Network weight is 1089. Expected time to earn interest is 0 seconds)  I am using the latest version 2.1 and have no issues connecting or staking. I am a long time investor (from the beginning) and I run my wallet on a very regular basis although I cannot run it 24/7. If there is anything I can do to help others  get connected let me know. I am here to support the community in any way I can and I believe in your project argakiig.  

Put these in your SonicScrewdriver.conf file

Code:

addnode=w5fg7bcjf3z6jxzs.onion:14437
addnode=lbtk6lq44ca2wu7k.onion:14437
addnode=ceyfx4oatpgqf6kk.onion:14437
addnode=jjsgap2t6rhoyawq.onion:14437
addnode=czj3ra2s3jwzpyhs.onion:14437
addnode=7lx2wwemlofroq6q.onion:14437
addnode=tvvovkwu2qd3cdiq.onion:14437
addnode=rtzexkvccilnlemz.onion:14437
addnode=vn4g4t6gwqja5tno.onion:14437

If you connect and the network weight is low you may have be on your own chain so you will need to delete the block chain and re-sync. Most likely it will just orphan those last blocks that you mined on your own chain. You should be on or just past block 856192 depending on when you read this.

{
"version" : "v2.1.0.0",
"protocolversion" : 62100,
"walletversion" : 60000,
"balance" : 74891.82198700,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 856192,
"moneysupply" : 22377288.55233100,
"connections" : 5,
"proxy" : "",
"difficulty" : 429240.67985483,
"testnet" : false,
"keypoololdest" : 1451447797,
"keypoolsize" : 102,
"paytxfee" : 0.00000000,
"unlocked_until" : 0,
"errors" : ""
}

[BrotherJ]

I guess what I should have said is that it appears that I'm the only one, or one of few, staking. (Minting. Your weight is 4705964. Network weight is 1089. Expected time to earn interest is 0 seconds)  I am using the latest version 2.1 and have no issues connecting or staking. I am a long time investor (from the beginning) and I run my wallet on a very regular basis although I cannot run it 24/7. If there is anything I can do to help others  get connected let me know. I am here to support the community in any way I can and I believe in your project argakiig.  

Put these in your SonicScrewdriver.conf file

Code:

addnode=w5fg7bcjf3z6jxzs.onion:14437
addnode=lbtk6lq44ca2wu7k.onion:14437
addnode=ceyfx4oatpgqf6kk.onion:14437
addnode=jjsgap2t6rhoyawq.onion:14437
addnode=czj3ra2s3jwzpyhs.onion:14437
addnode=7lx2wwemlofroq6q.onion:14437
addnode=tvvovkwu2qd3cdiq.onion:14437
addnode=rtzexkvccilnlemz.onion:14437
addnode=vn4g4t6gwqja5tno.onion:14437

If you connect and the network weight is low you may have be on your own chain so you will need to delete the block chain and re-sync. Most likely it will just orphan those last blocks that you mined on your own chain. You should be on or just past block 856192 depending on when you read this.

{
"version" : "v2.1.0.0",
"protocolversion" : 62100,
"walletversion" : 60000,
"balance" : 74891.82198700,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 856192,
"moneysupply" : 22377288.55233100,
"connections" : 5,
"proxy" : "",
"difficulty" : 429240.67985483,
"testnet" : false,
"keypoololdest" : 1451447797,
"keypoolsize" : 102,
"paytxfee" : 0.00000000,
"unlocked_until" : 0,
"errors" : ""
}

First off, I don't use a config file. I've never needed one to find connections. But I did just open my wallet to confirm the "getinfo". This is what I have.

{
"version" : "v2.1.0.0",
"protocolversion" : 62100,
"walletversion" : 60000,
"balance" : 578946.98353100,
"newmint" : 0.00000000,
"stake" : 422.17241800,
"blocks" : 856201,
"moneysupply" : 22377290.73698500,
"connections" : 6,
"proxy" : "",
"ip" : "tvvovkwu2qd3cdiq.onion",
"difficulty" : 429240.67985483,
"testnet" : false,
"keypoololdest" : 1416698207,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"unlocked_until" : 0,
"errors" : ""
}


Now watch this. I'm going to unlock my wallet again while I finish getting ready for work. I bet the chain starts moving along better. 

[aragoon]

Can someone tell me what exchange SSD is currently on? Thanks. 

[crazywack]

Bittrex is the only one we are listed on.

[crazywack]

I have updated the OP just waiting on approval and posting by arg,

I have also been in small contact with the graphics creator on changing the road map. When I have more I'll post it but at the moment I don't.

The wallet still needs to be updated to new graphics so in a sence we are still on the first stop of the roadmap. But work is being done to college the other steps as well as blocknet integration/testing.

[elroigter]

When I try to make a transaction the wallets says me:

Error the transaction was rejected. This might happen if some of the coins in your wallet are spend, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Please open console and type clearwallet transactions followed by scanforalltxns to repair.

I don´t  make a transaction with a copy of my wallet and I type the commands in the console and I have the same error, anybody can help me?, thanks

[stealth.money]

When I try to make a transaction the wallets says me:

Error the transaction was rejected. This might happen if some of the coins in your wallet are spend, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Please open console and type clearwallet transactions followed by scanforalltxns to repair.

I don´t  make a transaction with a copy of my wallet and I type the commands in the console and I have the same error, anybody can help me?, thanks

Try to make smaller amount, instead of 100k per transaction lower it to 40k or 20k.

[argakiig]

Updated Bootstrap to 883717 if anyone needs it. all nice and clean and linearized for quick importing

https://drive.google.com/file/d/0BwGL9FkcBurEY3gyTVFNOEpydzg/view?usp=sharing

Will have updated Windows and Mac builds soon with code optimizations to make things run more smooth.

[argakiig]

When I try to make a transaction the wallets says me:

Error the transaction was rejected. This might happen if some of the coins in your wallet are spend, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Please open console and type clearwallet transactions followed by scanforalltxns to repair.

I don´t  make a transaction with a copy of my wallet and I type the commands in the console and I have the same error, anybody can help me?, thanks

Make sure you have your wallet.dat backed up then follow these directions.

1. Open Debug Window
2. type "clearwallettransactions"
3. type "scanforalltxns" and wait.

Step 3 can take quite a while as it is scanning all previous blocks for any transactions related to your addresses.

[crazywack]

Awesome, thanks for the update and bootstrap argakiig!

[mamator]

Thanks!!, that´s work

When I try to make a transaction the wallets says me:

Error the transaction was rejected. This might happen if some of the coins in your wallet are spend, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Please open console and type clearwallet transactions followed by scanforalltxns to repair.

I don´t  make a transaction with a copy of my wallet and I type the commands in the console and I have the same error, anybody can help me?, thanks

Try to make smaller amount, instead of 100k per transaction lower it to 40k or 20k.

[adsactly]

I guess Poloniex doesn't actually support SSD anymore therefore I have lots the SSD I attempted to withdraw from
Poloniex the other day.

This is the Address I sent them to "sVZssbckXPtCycptto3f9V3TAwXyzWra3R" and still nothing showing on my wallet

Perhaps somebody can help me look into this issue.

[BrotherJ]

Updated Bootstrap to 883717 if anyone needs it. all nice and clean and linearized for quick importing

https://drive.google.com/file/d/0BwGL9FkcBurEY3gyTVFNOEpydzg/view?usp=sharing

Will have updated Windows and Mac builds soon with code optimizations to make things run more smooth.

Hey Arg,

My wallet has been quite buggy lately. I've tried resetting the roaming folder and also the bootstrap. It was working flawlessly forever but now I constantly get the (not responding) error. I haven't been able to update since about block 900k. Could it be that I have over 90k transactions? Any advise would be appreciated. Thanks

3/29 It seems to have sorted itself out after a few nights of being open. Looking forward to the new release.

[crazywack]

I guess Poloniex doesn't actually support SSD anymore therefore I have lots the SSD I attempted to withdraw from
Poloniex the other day.

This is the Address I sent them to "sVZssbckXPtCycptto3f9V3TAwXyzWra3R" and still nothing showing on my wallet

Perhaps somebody can help me look into this issue.

Polo hasn't supported SSD for almost a year. They most likely don't even have hot wallet. Cold wallet could be on the wrong chain or gone completely. My suggestion is to contact them.

[Bavaria]

Some months ago I read on this thread that the dev was working on integrating TOR in SSD Android wallet. Any news on this topic?