Spiceminer's Ant Viewer - Online monitoring stats! alerts - Antminer monitoring!

[ElGabo]

Got this at a startup: (Not English but hope it helps)

the XML file with your ants has some invalid character in it, did you edit it manually? it says invalid char in the XML. I should add error handling for this

I've used scan for ants, didn't edited manually.

Give a try and and get back when finished.

it could be a special character in one of the names of the ants?

like a '

could you copy and paste your antmines.config file. Be sure to remove any passwords you dont want ppl to see

No special characters. I only use IP-s.

Latest one looks fine, if crashes I'll copy here the config.

[ElGabo]

The latest one runing since noon. No problem yet.

Let's see what will do until tomorrow.

It works fine with Mobilminer.  

got a new version. this one has significant performance increases, should be almost 50% faster.

I've seen as low as 30ms to refresh and draw ant status to grid, but usually see about 40ms.

25 ants refreshed and displayed in .78 seconds. and 150 in 12 seconds.

this new version should work much better for you with lots of ants. give it a shot lemme know if its better.

DOWNLOAD: SAntViewer.zip v1.1.7

Ok!

Give a try and report back.

Edit:

Small tip sent.  

Edit 2:

Downloaded the newest, checking.

[spiceminer15]

sorry found major bug, please download again if you have already.

[spiceminer15]

Small tip sent.  

wow. thanks 

[ElGabo]

sorry found major bug, please download again if you have already.

DOWNLOAD: SAntViewer.zip v1.1.7

This one send data to Mobileminer in MHs not Ghs.  Was fun when i saw it. 

[ElGabo]

Small tip sent.  

wow. thanks 

Welcomed. 

[spiceminer15]

sorry found major bug, please download again if you have already.

DOWNLOAD: SAntViewer.zip v1.1.7

This one send data to Mobileminer in MHs not Ghs.  Was fun when i saw it. 

hah yea forgot about that. Damn will upload new version in about 5mins

[spiceminer15]

sorry found major bug, please download again if you have already.

DOWNLOAD: SAntViewer.zip v1.1.7

This one send data to Mobileminer in MHs not Ghs.   Was fun when i saw it.  

ahah sorry about that. download again its fixed now

[ElGabo]

sorry found major bug, please download again if you have already.

DOWNLOAD: SAntViewer.zip v1.1.7

This one send data to Mobileminer in MHs not Ghs.  Was fun when i saw it. 

ahah sorry about that. download again its fixed now

DOWNLOAD: SAntViewer.zip v1.1.7

I go to bed now, will try tomorrow morning. 

[ElGabo]

Back again.

1.1.7 Version.

On one of my PC-s it stops refreshing after some time. No error message or something, just simply stops. If I refresh by hand it goes back to normal.

On the other one I usually found it closed after about half a day, I was not able to catch any error messages.

[spiceminer15]

Back again.

1.1.7 Version.

On one of my PC-s it stops refreshing after some time. No error message or something, just simply stops. If I refresh by hand it goes back to normal.

On the other one I usually found it closed after about half a day, I was not able to catch any error messages.

what about in the application event viewer. Can you check there for any .net errors?

[spiceminer15]

mine been running for days without erroring out, I've been checking the memory usages and it was very low.

i'll keep trying to see what I can find, but if you can look back in the application event viewer and see if there was a .net error. that would help so much, i'm sure I could fix it if I had that information.

I also bought an s2 last night, i'll make a few little changes to be able to display the extra data from the s2, like the fans, temps, and what not

[spiceminer15]

changed a few things, removed username and password, they are not needed.

added more room in grids to accommodate s2's extra information.

[coinme.info]

I upgraded my S3s with the latest firmware antMiner_S320140826.bin from Bitmaintech and
then installed the latest Cgminer 4.6.0 like this:

1. SSH into the S3 and login
2. Issue the following commands sequentially.
  a) cd /usr/bin
  b) mv cgminer cgminer.bak
  c) wget http://ck.kolivas.org/apps/cgminer/antminer/s3/4.6.0-140908/cgminer
  d) chmod +x cgminer
  e) /etc/init.d/cgminer restart

The miners are no longer seen by Ant Viewer. Even with latest version 1.18

Hope you are able to have a look at why S3s are no longer visible. Must be a change to the API in CGminer

My S1s are still showing, just the S3s since upgrade to CGminer 4.6.0.

Experienced the same with the shipped versions of firmware using 4.60 so I'm pretty certain it is CGminer that is the issue.

[spiceminer15]

Are you sure that the s3 still have API access enabled? Check to make sure at least --api-listen --api-network is used

I used the latest API docs for cgminer when I made the app

[coinme.info]

Are you sure that the s3 still have API access enabled? Check to make sure at least --api-listen --api-network is used

I used the latest API docs for cgminer when I made the app

I've got --api-listen --api-allow W:192.168.1.0/24,W:127.0.0.1

I added in --api-network on one of the S3s and no difference.

They all show as Dead.

However they are all visible in Awesome Miner as that's what the --api-allow is for so I can add/remove/switch pools on the fly.

?

[ElGabo]

Just got this:

  Problémaesemény neve:   CLR20r3
  Probléma-aláírás: 01:   santviewer.exe
  Probléma-aláírás: 02:   1.1.7.0
  Probléma-aláírás: 03:   540ca661
  Probléma-aláírás: 04:   System
  Probléma-aláírás: 05:   4.0.30319.17929
  Probléma-aláírás: 06:   4ffa5c88
  Probléma-aláírás: 07:   2390
  Probléma-aláírás: 08:   8d
  Probléma-aláírás: 09:   N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
  Operációs rendszer verziója:   6.1.7601.2.1.0.256.1
  Területibeállítás-azonosító:   1038
  További információk 1:   0a9e
  További információk 2:   0a9e372d3b4ad19135b953a78882e789
  További információk 3:   0a9e
  További információk 4:   0a9e372d3b4ad19135b953a78882e789

On the machine what waching a lot of ants.

Edit:

Version 1.1.7

On the other PC stopped working as always and no error message.

I'll give a try for the new one today.

[spiceminer15]

Are you sure that the s3 still have API access enabled? Check to make sure at least --api-listen --api-network is used

I used the latest API docs for cgminer when I made the app

I've got --api-listen --api-allow W:192.168.1.0/24,W:127.0.0.1

I added in --api-network on one of the S3s and no difference.

They all show as Dead.

However they are all visible in Awesome Miner as that's what the --api-allow is for so I can add/remove/switch pools on the fly.

?

I'll take a look at it today, I just got an email this morning that bit main shipped my s3s. So I'll have them soon worse case scenario to test with

[spiceminer15]

Just got this:

  Problémaesemény neve:   CLR20r3
  Probléma-aláírás: 01:   santviewer.exe
  Probléma-aláírás: 02:   1.1.7.0
  Probléma-aláírás: 03:   540ca661
  Probléma-aláírás: 04:   System
  Probléma-aláírás: 05:   4.0.30319.17929
  Probléma-aláírás: 06:   4ffa5c88
  Probléma-aláírás: 07:   2390
  Probléma-aláírás: 08:   8d
  Probléma-aláírás: 09:   N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
  Operációs rendszer verziója:   6.1.7601.2.1.0.256.1
  Területibeállítás-azonosító:   1038
  További információk 1:   0a9e
  További információk 2:   0a9e372d3b4ad19135b953a78882e789
  További információk 3:   0a9e
  További információk 4:   0a9e372d3b4ad19135b953a78882e789

On the machine what waching a lot of ants.

Edit:

Version 1.1.7

On the other PC stopped working as always and no error message.

I'll give a try for the new one today.

can you translate for me

[spiceminer15]

mine actually crashed last night as well. I was able to find the error. i'll release a new version soon.