ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 06:50:27 AM |
|
It does sync the time properly with the network time. Just noticed IPv4 broadcast is empty. I wonder if there was something there before? screen -r? What does it say? Tplink shall be able to sync network time
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 08:23:16 AM |
|
It does sync the time properly with the network time. Just noticed IPv4 broadcast is empty. I wonder if there was something there before? screen -r? What does it say? Tplink shall be able to sync network time
---------------------- Just noticed IPv4 broadcast is empty --------------------------- It does not matter .... once again screen -r via ssh will tell you what is wrong pls post the output here
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 08:31:34 AM Last edit: November 17, 2014, 08:54:01 AM by ManeBjorn |
|
Sorry about the confusion. Got it. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot328.png&t=665&c=iwlRHX5Hx496kQ) It does sync the time properly with the network time. Just noticed IPv4 broadcast is empty. I wonder if there was something there before? screen -r? What does it say? Tplink shall be able to sync network time
---------------------- Just noticed IPv4 broadcast is empty --------------------------- It does not matter .... once again screen -r via ssh will tell you what is wrong pls post the output here
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 08:53:52 AM |
|
Same as web user and pass ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 08:54:47 AM |
|
Got it in previous post. Screenshot is there now. Sorry about that. I brain cramped. Same as web user and pass ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 09:18:17 AM |
|
Got it in previous post. Screenshot is there now. Sorry about that. I brain cramped. Same as web user and pass ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) So it appears like usb issue cables hubs or..? Board is missing please type lsusb and post output
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 09:24:51 AM |
|
All the chip LEDs are lighting up and blinking like it is hashing which is odd. I have tried two hubs as well as directly into the TP-Link. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot329.png&t=665&c=IP6nNu4J342ppg) Got it in previous post. Screenshot is there now. Sorry about that. I brain cramped. Same as web user and pass ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) So it appears like usb issue cables hubs or..? Board is missing please type lsusb and post output
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 09:29:31 AM |
|
dude in shell please type lsusb and post output can you? Or better if you want/can pm me a TW id/pass so i can take a look ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 09:33:21 AM |
|
Sorry it's 4:30am here I am a bit slow. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot330.png&t=665&c=UYAGMCuJN6zmIA) dude in shell please type lsusb and post output can you?
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 09:35:09 AM |
|
board is not there and there is no USB hUB connected also
check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 09:38:45 AM |
|
I do, I have a solid power wart for the TP link. I will double check the other cable though. board is not there and there is no USB hUB connected also
check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 09:55:59 AM |
|
I do, I have a solid power wart for the TP link. I will double check the other cable though. board is not there and there is no USB hUB connected also
check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data
Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself. Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 09:58:55 AM |
|
I wish there was a RPi image for it. I have a ton of them. I will test it on a windows system. Thank you for your help I do appreciate it. I do, I have a solid power wart for the TP link. I will double check the other cable though. board is not there and there is no USB hUB connected also
check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data
Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself. Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 10:06:32 AM |
|
It's a bit different this time. I changed the cable and the hub again. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot331.png&t=665&c=jR_SzRzgi21fMA) I do, I have a solid power wart for the TP link. I will double check the other cable though. board is not there and there is no USB hUB connected also
check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data
Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself. Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 10:16:50 AM |
|
It's a bit different this time. I changed the cable and the hub again. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot331.png&t=665&c=jR_SzRzgi21fMA) I do, I have a solid power wart for the TP link. I will double check the other cable though. board is not there and there is no USB hUB connected also
check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data
Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself. Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok So it shall be mining if your udevd is started. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Otherwise you need to restart cgminer Or better just execute /usr/bin/fix_rc it will enable udevd and reboot tplink the all will be good ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 10:21:27 AM |
|
Closer but not quite. Rebooting the TP-Link and also SSH in and tried it manually. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot333.png&t=665&c=08tyg1fSxF5Ytw) It's a bit different this time. I changed the cable and the hub again. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot331.png&t=665&c=jR_SzRzgi21fMA) I do, I have a solid power wart for the TP link. I will double check the other cable though. board is not there and there is no USB hUB connected also
check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data
Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself. Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok So it shall be mining if your udevd is started. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Otherwise you need to restart cgminer Or better just execute /usr/bin/fix_rc it will enable udevd and reboot tplink the all will be good ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 10:36:57 AM |
|
Just power off HEXM board - unplug USB + 12V Reboot tplink power on 12V of HM board and finally plug USB cable ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) And you can remove hub also just plug board directly and make sure lsusb shows it
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 10:47:15 AM |
|
Check again your cgminer configuration page.
Handle usb detect error as : set to hex4m
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 11:00:02 AM |
|
So close. Now I have a Zombie. LOL Hex4m is set for the handle USB error. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot334.png&t=665&c=9mOPxGc-GP6IFw) Check again your cgminer configuration page.
Handle usb detect error as : set to hex4m
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2014, 11:07:16 AM |
|
So close. Now I have a Zombie. LOL Hex4m is set for the handle USB error. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi72.photobucket.com%2Falbums%2Fi173%2FTalon8Ya%2FMTG%2520for%2520Sale%2FScreenshot334.png&t=665&c=9mOPxGc-GP6IFw) Check again your cgminer configuration page.
Handle usb detect error as : set to hex4m
Remove the USB HUB ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Power off 12V of HEXM Remove USB HEXM cable Power on 12V of hexM PLUG USB cable of HEXM into tplink without hub directly and make sure your USB cable is OK ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
|