[Guide] Dogie's Comprehensive Technobit HEX4M [HD]

[ManeBjorn]

It does sync the time properly with the network time.
Just noticed IPv4 broadcast is empty.  I wonder if there was something there before?

screen -r?
What does it say?
Tplink shall be able to sync network time

[loshia]

It does sync the time properly with the network time.
Just noticed IPv4 broadcast is empty.  I wonder if there was something there before?

screen -r?
What does it say?
Tplink shall be able to sync network time

----------------------
Just noticed IPv4 broadcast is empty
---------------------------

It does not matter ....
once again screen -r via ssh will tell you what is wrong
pls post the output here

[ManeBjorn]

Sorry about the confusion.
Got it.

It does sync the time properly with the network time.
Just noticed IPv4 broadcast is empty.  I wonder if there was something there before?

screen -r?
What does it say?
Tplink shall be able to sync network time

----------------------
Just noticed IPv4 broadcast is empty
---------------------------

It does not matter ....
once again screen -r via ssh will tell you what is wrong
pls post the output here

[loshia]

Same as web user and  pass

[ManeBjorn]

Got it in previous post.
Screenshot is there now.
Sorry about that.  I brain cramped.

Same as web user and  pass

[loshia]

Got it in previous post.
Screenshot is there now.
Sorry about that.  I brain cramped.

Same as web user and  pass

So it appears like usb issue cables hubs or..?


Board is missing

please type lsusb and post output

[ManeBjorn]

All the chip LEDs are lighting up and blinking like it is hashing which is odd.
I have tried two hubs as well as directly into the TP-Link. 

Got it in previous post.
Screenshot is there now.
Sorry about that.  I brain cramped.

Same as web user and  pass

So it appears like usb issue cables hubs or..?


Board is missing

please type lsusb and post output

[loshia]

dude in shell please type lsusb and post output can you?
 Or better if you want/can pm me a TW id/pass so i can take a look

[ManeBjorn]

Sorry it's 4:30am here I am a bit slow.

dude in shell please type lsusb and post output can you?
 

[loshia]

board is not there and there is no USB hUB connected also

check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data

[ManeBjorn]

I do, I have a solid power wart for the TP link.
I will double check the other cable though.

board is not there and there is no USB hUB connected also

check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data

[loshia]

I do, I have a solid power wart for the TP link.
I will double check the other cable though.

board is not there and there is no USB hUB connected also

check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data

Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself.
Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok

[ManeBjorn]

I wish there was a RPi image for it.  I have a ton of them.  I will test it on a windows system. 
Thank you for your help I do appreciate it.

I do, I have a solid power wart for the TP link.
I will double check the other cable though.

board is not there and there is no USB hUB connected also

check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data

Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself.
Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok

[ManeBjorn]

It's a bit different this time.  I changed the cable and the hub again.

I do, I have a solid power wart for the TP link.
I will double check the other cable though.

board is not there and there is no USB hUB connected also

check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data

Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself.
Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok

[loshia]

It's a bit different this time.  I changed the cable and the hub again.

I do, I have a solid power wart for the TP link.
I will double check the other cable though.

board is not there and there is no USB hUB connected also

check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data

Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself.
Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok

So it shall be mining if your udevd is started. Otherwise you need to restart cgminer

Or better just execute /usr/bin/fix_rc it will enable udevd and reboot tplink the all will be good

[ManeBjorn]

Closer but not quite.
Rebooting the TP-Link and also SSH in and tried it manually.

It's a bit different this time.  I changed the cable and the hub again.

I do, I have a solid power wart for the TP link.
I will double check the other cable though.

board is not there and there is no USB hUB connected also

check your usb cable and try with another one. You need to have twio USB cables connected in TPLINK one for power and one for usb data

Ok whatever you plug in tplink usb data port shall show in lsusb. It may bad usb cable, or just bad usb port of the tplink itself.
Meanwhile just for the record you can plug your miner in windows. It shall show up like unknown usb device if all is ok. Just to see if miner usb connection is ok

So it shall be mining if your udevd is started. Otherwise you need to restart cgminer

Or better just execute /usr/bin/fix_rc it will enable udevd and reboot tplink the all will be good

[loshia]

Just power off HEXM board - unplug USB + 12V
Reboot tplink
power on 12V of HM board and finally plug USB cable  
And you can remove hub also just plug board directly and make sure lsusb shows it

[Zich]

Check again your cgminer configuration page.

Handle usb detect error as : set to hex4m

[ManeBjorn]

So close.  Now I have a Zombie. LOL
Hex4m is set for the handle USB error.

Check again your cgminer configuration page.

Handle usb detect error as : set to hex4m

[loshia]

So close.  Now I have a Zombie. LOL
Hex4m is set for the handle USB error.

Check again your cgminer configuration page.

Handle usb detect error as : set to hex4m

Remove the USB HUB
Power off 12V of HEXM
Remove USB HEXM cable

Power on 12V of hexM
PLUG USB cable of HEXM into tplink without hub directly
and make sure your USB cable is OK