Avalon4 with global shipping can be purchased here!

[dogie]

Antminer S4's
$850 for 2TH so cheaper
PSU Included
Same power useage
Immediate Shipping

Noise levels in high ambients will be quite different.

[1713555602]

1713555602

[1713555602]

1713555602

[Bicknellski]

As always very good guide. Unfortunately as of today these are a bit over priced, delivering around 300GHs at 1020W for 4.5BTC. 180GHs Ants at 360W are only 1.37BTC now.

There will very likely be a price drop on these units, but yes, its mainly the chips that aren't competitive.

What about the Avalon4 same right Dogie?

[marto74]

Hex16a4 board in flesh



http://technobit.eu/index.php?id_product=89&controller=product&id_lang=1

p.s. Bick do you have to share something about designs with Avalon4 chip

[stan258]

Antminer S4's
$850 for 2TH so cheaper
PSU Included
Same power useage
Immediate Shipping

Noise levels in high ambients will be quite different.

I think their is too much bad blood for a group buy.  Rockminer is a reseller for profit prices. 

[ngzhang]

Working with crew on a perspex case demo machine for hk bitcoin expo ...






↑This is Xiangfu

[RoadStress]

Working with crew on a perspex case demo machine for hk bitcoin expo ...

Good luck!

[dogie]

Components being delivered

[klondike_bar]

Working with crew on a perspex case demo machine for hk bitcoin expo ...

sexy device. questions:
1) it requires an external controller?
2) it looks like multiple units can be daisy-chained. whats the limitations on this? (it would be nice to monitor and control 5TH+ under a single IP)

[dogie]

Working with crew on a perspex case demo machine for hk bitcoin expo ...

sexy device. questions:
1) it requires an external controller?
2) it looks like multiple units can be daisy-chained. whats the limitations on this? (it would be nice to monitor and control 5TH+ under a single IP)

1) Same as Avalon 3
2) Avalon 3 was 4 devices per USB port, and with a 10 USB hub could get 40 devices per controller. I'm not sure what it will end up as on Avalon 4.

[QuiveringGibbage]

Working with crew on a perspex case demo machine for hk bitcoin expo ...

@ngzhang; Your signature on this forum, has a link to http://avalon-asics.com/ ... isn't it suppose to be http://avalon-asic.com/ ... ?

nice demo case

QG

[dankefoss]

I've been in contact with Rockminer who is selling the Avalon 4 on their site. They have said that they have units for shipping, but that the shipping calculator for small orders is off. Not sure if they will try to add money or cancel order for single units, etc.

eHash.com (Canaan Creative??) still does not have a price of add to cart link.

Did anyone get a reply from manufacturer on those (price and shipping dates)?

Dan

[stan258]

I've been in contact with Rockminer who is selling the Avalon 4 on their site. They have said that they have units for shipping, but that the shipping calculator for small orders is off. Not sure if they will try to add money or cancel order for single units, etc.

eHash.com (Canaan Creative??) still does not have a price of add to cart link.

Did anyone get a reply from manufacturer on those (price and shipping dates)?

Dan

Yes Canaan is not taking BTC only cash right now.  We would need to order 40 from Canaan via wire. 

[dogie]

The first stable Avalon4 RPi/703N firmware released. Version: Canaan A4-20141127

Details:
RPi/703N Firmware
   http://downloads.canaan-creative.com/software/avalon4/openwrt/20141127_1341/
MM Firmware
   http://downloads.canaan-creative.com/software/avalon4/mm/2014-11-22/

Feature：
* Support TL-WR703N, Raspberry Pi B/B+
* Latest cgminer, version: 4.7.0
* Latest OpenWrt, version: r43076
* Brand new GUI
* Brand new usb converter: AUC
* Support up to 9 Avalon4-1T machines in one AUC chain with automatical ID assignment
* One RPi/703N can handle up to 100 Avalon4-1T machines
* AUC hotplug
* Avalon4-1T module hotplug
* Adjust module's voltage automatically for power optimization
* Brand new MM protocol，support voltage/frequency/fan adjustment per module


Default Configuration：
* Chip Frequency        8125
* Chip Voltage            445:385:370
* Automatic Voltage    True
* Fan                         20-100

Be careful with your TL-WR703N's old configuration.

[Dimoza]

Hi,

I just recentyl purchased the Avalon Nano (anonced here couple of month ago https://bitcointalk.org/index.php?topic=779612.msg8841428;topicseen#msg8841428). I have successfuly downloaded and compiled fresh version of bfgminer and run it. It works fine for couple of minutes, then it starts to get slower and finally stall at all. Restarting the bfgminer helps but for same couple of minutes.

I've got configuration here: https://en.bitcoin.it/wiki/Avalon_nano#BFGMiner
here is a log (last half of that): http://pastebin.com/EQAj58HH
I'm on linux, if it have a sense.

The obvious solution -- to make the simple script that restart BFGMiner each 2 minutes, but it's doesn't looks good.

I'd be appreciate for any help.

PS cgminer just doesn't work at all. can't detect devices. I was trying several versions including lastone.

[stan258]

Hi,

I just recentyl purchased the Avalon Nano (anonced here couple of month ago https://bitcointalk.org/index.php?topic=779612.msg8841428;topicseen#msg8841428). I have successfuly downloaded and compiled fresh version of bfgminer and run it. It works fine for couple of minutes, then it starts to get slower and finally stall at all. Restarting the bfgminer helps but for same couple of minutes.

I've got configuration here: https://en.bitcoin.it/wiki/Avalon_nano#BFGMiner
here is a log (last half of that): http://pastebin.com/EQAj58HH
I'm on linux, if it have a sense.

The obvious solution -- to make the simple script that restart BFGMiner each 2 minutes, but it's doesn't looks good.

I'd be appreciate for any help.

PS cgminer just doesn't work at all. can't detect devices. I was trying several versions including lastone.

download GUI and driver from:
https://ehash.com/product/avalon-nano/

[Dimoza]

Hi,

I just recentyl purchased the Avalon Nano (anonced here couple of month ago https://bitcointalk.org/index.php?topic=779612.msg8841428;topicseen#msg8841428). I have successfuly downloaded and compiled fresh version of bfgminer and run it. It works fine for couple of minutes, then it starts to get slower and finally stall at all. Restarting the bfgminer helps but for same couple of minutes.

I've got configuration here: https://en.bitcoin.it/wiki/Avalon_nano#BFGMiner
here is a log (last half of that): http://pastebin.com/EQAj58HH
I'm on linux, if it have a sense.

The obvious solution -- to make the simple script that restart BFGMiner each 2 minutes, but it's doesn't looks good.

I'd be appreciate for any help.

PS cgminer just doesn't work at all. can't detect devices. I was trying several versions including lastone.

download GUI and driver from:
https://ehash.com/product/avalon-nano/

thank you for hint, but
I don't use proprietary software. And don't reccomend to do so for anybody, especially who have a deal with cryptocurrecy.
I'm *nix user. So ehash.com MS Windows app just irrelevant in my case.
I don't need GUI for my purposes

[ManeBjorn]

The software they provide is terrible as well.
It literally has ads in it.  If you have any other miners running on your computer this software interferes as well.
Don't use it.

Hi,

I just recentyl purchased the Avalon Nano (anonced here couple of month ago https://bitcointalk.org/index.php?topic=779612.msg8841428;topicseen#msg8841428). I have successfuly downloaded and compiled fresh version of bfgminer and run it. It works fine for couple of minutes, then it starts to get slower and finally stall at all. Restarting the bfgminer helps but for same couple of minutes.

I've got configuration here: https://en.bitcoin.it/wiki/Avalon_nano#BFGMiner
here is a log (last half of that): http://pastebin.com/EQAj58HH
I'm on linux, if it have a sense.

The obvious solution -- to make the simple script that restart BFGMiner each 2 minutes, but it's doesn't looks good.

I'd be appreciate for any help.

PS cgminer just doesn't work at all. can't detect devices. I was trying several versions including lastone.

download GUI and driver from:
https://ehash.com/product/avalon-nano/

[xiaoma9hao]

http://www.cybtc.info/data/attachment/forum/201412/02/025524fgj4qps14pjsqjn4.jpg

http://www.cybtc.info/data/attachment/forum/201412/02/025516kh8k7iirkjgnrvnw.jpg

http://www.cybtc.info/data/attachment/forum/201412/02/025518htuziukisrrzkha4.jpg

http://www.cybtc.info/data/attachment/forum/201412/02/025527copnchd30zgohod1.jpg

http://www.cybtc.info/data/attachment/forum/201412/02/025619yhhbc3ek3kn1e6yq.jpg

http://www.cybtc.info/data/attachment/forum/201412/02/025816p2cijcccicyjks41.png

 

[stan258]

The software they provide is terrible as well.
It literally has ads in it.  If you have any other miners running on your computer this software interferes as well.
Don't use it.

Hi,

I just recentyl purchased the Avalon Nano (anonced here couple of month ago https://bitcointalk.org/index.php?topic=779612.msg8841428;topicseen#msg8841428). I have successfuly downloaded and compiled fresh version of bfgminer and run it. It works fine for couple of minutes, then it starts to get slower and finally stall at all. Restarting the bfgminer helps but for same couple of minutes.

I've got configuration here: https://en.bitcoin.it/wiki/Avalon_nano#BFGMiner
here is a log (last half of that): http://pastebin.com/EQAj58HH
I'm on linux, if it have a sense.

The obvious solution -- to make the simple script that restart BFGMiner each 2 minutes, but it's doesn't looks good.

I'd be appreciate for any help.

PS cgminer just doesn't work at all. can't detect devices. I was trying several versions including lastone.

download GUI and driver from:
https://ehash.com/product/avalon-nano/

They haven't submitted a driver for Cgminer. Good luck.

[Dimoza]

The software they provide is terrible as well.
It literally has ads in it.  If you have any other miners running on your computer this software interferes as well.
Don't use it.

Hi,

I just recentyl purchased the Avalon Nano (anonced here couple of month ago https://bitcointalk.org/index.php?topic=779612.msg8841428;topicseen#msg8841428). I have successfuly downloaded and compiled fresh version of bfgminer and run it. It works fine for couple of minutes, then it starts to get slower and finally stall at all. Restarting the bfgminer helps but for same couple of minutes.

I've got configuration here: https://en.bitcoin.it/wiki/Avalon_nano#BFGMiner
here is a log (last half of that): http://pastebin.com/EQAj58HH
I'm on linux, if it have a sense.

The obvious solution -- to make the simple script that restart BFGMiner each 2 minutes, but it's doesn't looks good.

I'd be appreciate for any help.

PS cgminer just doesn't work at all. can't detect devices. I was trying several versions including lastone.

download GUI and driver from:
https://ehash.com/product/avalon-nano/

They haven't submitted a driver for Cgminer. Good luck.

irrelevant