CCminer(SP-MOD) Modded GPU kernels.

[lupanar]

Found some bug with sp_ skunk_release, if in one rig there is GPUs from different vendors, 5 GPUs from Palit and 1 from Giga like I have, ccminer not working and if it working so not all GPUs(3 from 6 somtimes) are in.
2 different bat files at each vendor cards resolving the issue.

[1714103092]

1714103092

[1714103092]

1714103092

[1714103092]

1714103092

[1714103092]

1714103092

[e6ug]

any idea why 1060 6gb 9gbs  would only be getting 6.4 mh/s  on sp skunk mod?  that is just over half of what i am getting with 1050ti

Use driver 382.xx and -i 25 in the batfile.

-i 25 bumped it up to 15 mh/s   should i try 26? or is that too much for a 1060 6gb 9gbs?   my 1060 3gb and regular 6gb cards are doing 16-17.5 mh/s

I had 1080 Ti set at -i 25.5, after a while some of the rigs started crashing.
I just set everything back the -i 25, rather have the stability.

the 9gbs 1060 must just be bad with skunk algo, now it has dropped back to 10 mh/s

[D8V1D]

Skunk Mod - 7 x 1080 Ti FE (1400watts)

http://imgur.com/a/d1eum

 70%   46 MH/s
100%  50 MH/s

I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.

I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.

Just because you allow the card to use 100% power, it doesn't necessarily mean it will use it. For some algos it does but for others it won't. Check with nvidia-smi or GPU-Z to see how much it actually uses.

Based on the small difference between 70% and 100%, it's probably only really using 75-80%.

Sp_, sen't a pm.

True, I was just basing it off my experience with zec and eth. I have a watt meter and the last 30% will add 800 watts on a 7 GPU 1080 Ti rig.
I haven't measured it from the wall with the Skunks algo though. Hash rate also doesn't increase linearly with increase in power output.

For example Zec: 0.12 KW/h
  70% 4700 H/s = 1400 watts  3.36 w/s  $610 per month
100% 5300 H/s = 2200 watts  2.41 w/s  $634 per month

96% of the profit comes from the first 70%. The added 800 watts at 100% also generates more heat.
In general, its just not worth it to run more than 70% on 1080 Ti.

[bathrobehero]

Skunk Mod - 7 x 1080 Ti FE (1400watts)

http://imgur.com/a/d1eum

 70%   46 MH/s
100%  50 MH/s

I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.

I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.

Just because you allow the card to use 100% power, it doesn't necessarily mean it will use it. For some algos it does but for others it won't. Check with nvidia-smi or GPU-Z to see how much it actually uses.

Based on the small difference between 70% and 100%, it's probably only really using 75-80%.

Sp_, sen't a pm.

True, I was just basing it off my experience with zec and eth. I have a watt meter and the last 30% will add 800 watts on a 7 GPU 1080 Ti rig.
I haven't measured it from the wall with the Skunks algo though. Hash rate also doesn't increase linearly with increase in power output.

For example Zec: 0.12 KW/h
  70% 4700 H/s = 1400 watts  3.36 w/s  $610 per month
100% 5300 H/s = 2200 watts  2.41 w/s  $634 per month

96% of the profit comes from the first 70%. The added 800 watts at 100% also generates more heat.
In general, its just not worth it to run more than 70% on 1080 Ti.

Yep!

Though EWBF miner is a bit of an oddball.

[rednoW]

Found some bug with sp_ skunk_release, if in one rig there is GPUs from different vendors, 5 GPUs from Palit and 1 from Giga like I have, ccminer not working and if it working so not all GPUs(3 from 6 somtimes) are in.
2 different bat files at each vendor cards resolving the issue.

I see that your  "group buy" post 0.01btc was successful ))

[sp_]

480 - 14,5 m/s

Ppl mine Signatum with a profit on Amd 480 and get 14.5 mhash.

Signatum sp-mod #1 private kernel  gtx 1080ti 50MHASH.

Donate 0.05 and recieve a copy of the Signatum sp-mod miner. pm for details.

[sp_]

Ok.- Skunk is ready.
0.05 BTC
Who want's it? Pm me.

How much $$$ gtx 1070 does today on Skunk?

Highest Bid Price
0.000001620 Bitcoin

https://coinsmarkets.com/trade-BTC-SIGT.htm

Looking at how fast coins are coming in for me that actually is a very good price. At the current price there i would make little under 0.05 btc per day. compared to 0.008 on the bigger coins.

signatum +23.4% today

Highest Bid Price
0.000002000 Bitcoin

Will soon be listed on cryptopia.

[joniosbra]

Ok.- Skunk is ready.
0.05 BTC
Who want's it? Pm me.

How much $$$ gtx 1070 does today on Skunk?

Highest Bid Price
0.000001620 Bitcoin

https://coinsmarkets.com/trade-BTC-SIGT.htm

Looking at how fast coins are coming in for me that actually is a very good price. At the current price there i would make little under 0.05 btc per day. compared to 0.008 on the bigger coins.

signatum +23.4% today

Highest Bid Price
0.000002000 Bitcoin

Will soon be listed on cryptopia.

It'll reach 3k satoshis very soon (right now 2900 on coinsmarkets.com). Maybe much more when launched on cryptopia.

[Ayers]

Ok.- Skunk is ready.
0.05 BTC
Who want's it? Pm me.

How much $$$ gtx 1070 does today on Skunk?

Highest Bid Price
0.000001620 Bitcoin

https://coinsmarkets.com/trade-BTC-SIGT.htm

Looking at how fast coins are coming in for me that actually is a very good price. At the current price there i would make little under 0.05 btc per day. compared to 0.008 on the bigger coins.

signatum +23.4% today

Highest Bid Price
0.000002000 Bitcoin

Will soon be listed on cryptopia.

It'll reach 3k satoshis very soon (right now 2900 on coinsmarkets.com). Maybe much more when launched on cryptopia.

lol dude that is 200 satoshi not 2900, check the coinsmarket rate, theya dded an extra digit to the end, beyond satoshi which make thing really confused, their maximum unit is 1 billions satoshi for 1 bitcoin

[du44]

3000 satoshi coming 

[Amph]

btw SP is your skunk miner finding block in solo, because i'm not finding any for now i see that it work with pool

[atrade06]

Regarding the "skunk", what is current time to mine 1 block using 5 or 6 x 1070?

Signatum (Skunk) can be mined on a pool. The miner support stratum connection

Here are some pools

Mining Pool:
https://sigt.suprnova.cc/
https://pool.mn/sigt/
http://lpool.name/
https://onepool.online/
http://hashbag.cc
http://yiimp.ccminer.org
https://pool.coin-miners.info

How to buy?

[brownfly]

gave a try to ccminer 2.2 for "skink". it produces ~ 20MH/s per 1070 card, ~100MH/s in total.

[bathrobehero]

lol dude that is 200 satoshi not 2900, check the coinsmarket rate, theya dded an extra digit to the end, beyond satoshi which make thing really confused, their maximum unit is 1 billions satoshi for 1 bitcoin

Yeah, I also confused the price of another coin and lost some money because of that.

I asked by why on Earth they would use 0.1 satoshis for their smallest increment and they told me:

"We think that some coins do not even worth 1 sat , and there is a clear note that * Min Price: 0.1 Satoshi"

Very annoying.


Anyway, skunkmod #1: I get 44.5 Mh/s per AORUS 1080Ti at 180 watts (60%) and 51.5 Mh/s at 300 watts (100%). The default 25 intensity seems to be the fastest (100% GPU usage).

[sp_]

Anyway, skunkmod #1: I get 44.5 Mh/s per AORUS 1080Ti at 180 watts (60%) and 51.5 Mh/s at 300 watts (100%). The default 25 intensity seems to be the fastest (100% GPU usage).

A single AMD radeon 480 does 14,5 m/s with the opencl miner. so with
2 1080ti cards in the rig and sp-mod #1 you mine as fast as 7 480 cards.
300 watt might sound alot, but 7 radeon 480 is pulling more.

but 120 watt for a 7Mhash increase might not be worth it.

[brownfly]

in few words, the "skunk" is CPU intensive, not RAM intensive (like ETH), right? I see that the single card uses very small RAM amount ~ 200 Mb.

[sp_]

in few words, the "skunk" is CPU intensive, not RAM intensive (like ETH), right? I see that the single card uses very small RAM amount ~ 200 Mb.

yes. but when you increase the intensity, you increase the ram usage as well. In my mod the memory is read lineary with vector instructions and works good on the GDDR5x memory (1080, 1080ti).
But more speed can be added later. Saturday. Pub time.
Cheers


Go get those coins!

[lupanar]

Found some bug with sp_ skunk_release, if in one rig there is GPUs from different vendors, 5 GPUs from Palit and 1 from Giga like I have, ccminer not working and if it working so not all GPUs(3 from 6 somtimes) are in.
2 different bat files at each vendor cards resolving the issue.

I see that your  "group buy" post 0.01btc was successful ))

No "group buy" guys, with all buy offers to sp_ pls.

[e6ug]

in few words, the "skunk" is CPU intensive, not RAM intensive (like ETH), right? I see that the single card uses very small RAM amount ~ 200 Mb.

dual mine?

[cryptoinvestor_x]

26 on 1070
35 on 1080
47 on 1080ti

On SPmod1 at 25 Intensity

Running max clocks on cards between 1770-1850 core around 831mv to 850mv