e6ug
|
|
July 21, 2017, 05:11:21 PM |
|
how do you change intesity for different gpu's on a mixed rig?
you use a comma between the numbers. f.ex. -i 23,25,25.25,22 will give the 4 gpu's the following intensities: gpu 0: 23 gpu 1: 25 gpu 2: 25.25 gpu 3: 22 Thank you sir, i will do some fine tuning after work tonight. spmod working great on 1070's!
|
|
|
|
|
|
|
|
"In a nutshell, the network works like a distributed
timestamp server, stamping the first transaction to spend a coin. It
takes advantage of the nature of information being easy to spread but
hard to stifle." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
sp_ (OP)
Legendary
Offline
Activity: 2898
Merit: 1087
Team Black developer
|
|
July 21, 2017, 05:12:44 PM |
|
SP, any recommendations for spreadminer options, or just run with defaults? I tried "-x", but hashrate was always worse than default run.
The default -x values are normally set to SMM count of the chip. So for the gtx 1060 3gb the default is 9, and on the gtx 1070 the default is 15. But -x 8 on the gtx 1060 3gb and -x 30 on the gtx 1070 might give a small boost. Multiples of the SMM count is usually best.
|
|
|
|
du44
|
|
July 21, 2017, 05:15:09 PM |
|
Nice results! That's a new world record for the skunk hash. Mind to take a screenshot? So sad but 53 mh rigs crashed after 10 minutes 51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages
|
hello
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
|
July 21, 2017, 05:16:21 PM |
|
Nice results! That's a new world record for the skunk hash. Mind to take a screenshot? So sad but 53 mh rigs crashed after 10 minutes 51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages How about the consumption on that speeds?
|
|
|
|
du44
|
|
July 21, 2017, 05:19:10 PM |
|
Nice results! That's a new world record for the skunk hash. Mind to take a screenshot? So sad but 53 mh rigs crashed after 10 minutes 51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages How about the consumption on that speeds? ~305 watts from psu and ~330 from the wall for me
|
hello
|
|
|
Chisinau
Newbie
Offline
Activity: 59
Merit: 0
|
|
July 21, 2017, 05:20:06 PM |
|
I will send out skunk sp-mod #1 soon.
I think it can do 45MHASH on the gtx 1080ti. Would you like to find out?
Mine when the profit is high with my optimized kernel. (0.05btc)
Hi SP , would like to try it , donated and sent you a PM , thank you !
|
|
|
|
brownfly
|
|
July 21, 2017, 05:25:48 PM |
|
But -x 8 on the gtx 1060 3gb and -x 30 on the gtx 1070 might give a small boost.
Multiples of the SMM count is usually best.
thank you, I will check.
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2898
Merit: 1087
Team Black developer
|
|
July 21, 2017, 05:51:19 PM |
|
51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages
Who can beat 51.5 MHASH?? Anyone? Screenshots please.
|
|
|
|
D8V1D
|
|
July 21, 2017, 05:54:38 PM |
|
Skunk Mod - 7 x 1080 Ti FE (1400watts) http://imgur.com/a/d1eum 70% 46 MH/s 100% 50 MH/s I have to run my cards at 70% due to my 1500 watt PSU limit. Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts. I think there might still be improvements for the Skunk mod. GPU power usage fluctuates between 49-70% rather than a constant 70%.
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2898
Merit: 1087
Team Black developer
|
|
July 21, 2017, 06:09:35 PM |
|
Skunk Mod - 7 x 1080 Ti FE (1400watts) 70% 46 MH/s 100% 50 MH/s I have to run my cards at 70% due to my 1500 watt PSU limit. Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts. I think there might still be improvements for the Skunk mod. GPU power usage fluctuates between 49-70% rather than a constant 70%. I need to buy a 1080ti and put it in my testrig to get 60 MHASH ++
|
|
|
|
D8V1D
|
|
July 21, 2017, 06:22:38 PM Last edit: July 21, 2017, 06:32:48 PM by D8V1D |
|
I need to buy a 1080ti and put it in my testrig to get 60 MHASH ++
Yes, you really should. Your optimizing for nvidia, but don't have a 1080 Ti *Update* 70% - 47 MH/s (-i 25.5)
|
|
|
|
Amph
Legendary
Offline
Activity: 3206
Merit: 1069
|
|
July 21, 2017, 07:52:14 PM |
|
is the speed confirmed on pool side?
|
|
|
|
brownfly
|
|
July 21, 2017, 08:04:04 PM |
|
Regarding the "skunk", what is current time to mine 1 block using 5 or 6 x 1070?
|
|
|
|
|
du44
|
|
July 21, 2017, 08:36:10 PM |
|
More than 5% blocks of SIGT mined already, with that temp coins will end in one week
|
hello
|
|
|
scryptr
Legendary
Offline
Activity: 1793
Merit: 1028
|
|
July 21, 2017, 09:07:32 PM |
|
I MINED 600+ SIGNATUM YESTERDAY-- While mining on "yiimp.ccminer.org" with a single 980ti over a period of 12 hours. Today, I would be lucky to earn 300 SIGT with the same GPU for the same amount of time. Miners that mined from launch time earned 1000s of SIGT with small rigs. I am hoping that scarcity is a good thing. --scryptr
|
|
|
|
finder
|
|
July 21, 2017, 11:48:59 PM |
|
Please check your address, thank you
|
|
|
|
e6ug
|
|
July 22, 2017, 01:49:08 AM |
|
any idea why 1060 6gb 9gbs would only be getting 6.4 mh/s on sp skunk mod? that is just over half of what i am getting with 1050ti
Use driver 382.xx and -i 25 in the batfile. -i 25 bumped it up to 15 mh/s should i try 26? or is that too much for a 1060 6gb 9gbs? my 1060 3gb and regular 6gb cards are doing 16-17.5 mh/s
|
|
|
|
D8V1D
|
|
July 22, 2017, 03:08:33 AM Last edit: July 22, 2017, 05:06:47 AM by D8V1D |
|
any idea why 1060 6gb 9gbs would only be getting 6.4 mh/s on sp skunk mod? that is just over half of what i am getting with 1050ti
Use driver 382.xx and -i 25 in the batfile. -i 25 bumped it up to 15 mh/s should i try 26? or is that too much for a 1060 6gb 9gbs? my 1060 3gb and regular 6gb cards are doing 16-17.5 mh/s I had 1080 Ti set at -i 25.5, after a while some of the rigs started crashing. I just set everything back to -i 25, rather have the stability.
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
July 22, 2017, 03:25:53 AM |
|
Skunk Mod - 7 x 1080 Ti FE (1400watts) http://imgur.com/a/d1eum 70% 46 MH/s 100% 50 MH/s I have to run my cards at 70% due to my 1500 watt PSU limit. Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts. I think there might still be improvements for the Skunk mod. GPU power usage fluctuates between 49-70% rather than a constant 70%. Just because you allow the card to use 100% power, it doesn't necessarily mean it will use it. For some algos it does but for others it won't. Check with nvidia-smi or GPU-Z to see how much it actually uses. Based on the small difference between 70% and 100%, it's probably only really using 75-80%. Sp_, sen't a pm.
|
Not your keys, not your coins!
|
|
|
|