CCminer(SP-MOD) Modded GPU kernels.

[Chisinau]

I will send out skunk sp-mod #1 soon.

I think it can do 45MHASH on the gtx 1080ti. Would you like to find out?

Mine when the profit is high with my optimized kernel. (0.05btc)

Hi SP , would like to try it , donated and sent you a PM , thank you !

[brownfly]

But -x 8 on the gtx 1060 3gb and -x 30 on the gtx 1070 might give a small boost.

Multiples of the SMM count is usually best.

thank you, I will check.

[sp_]

51.5 mh with 25.6 intensity working fine. BUt i think owners of zotac amp extreme and kfa how can get 53 with higher clock voltages

Who can beat 51.5 MHASH?? Anyone? Screenshots please.

[D8V1D]

Skunk Mod - 7 x 1080 Ti FE (1400watts)

http://imgur.com/a/d1eum

 70%   46 MH/s
100%  50 MH/s

I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.

I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.

[sp_]

Skunk Mod - 7 x 1080 Ti FE (1400watts)



 70%   46 MH/s
100%  50 MH/s

I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.

I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.

I need to buy a 1080ti and put it in my testrig to get 60 MHASH ++

[D8V1D]

I need to buy a 1080ti and put it in my testrig to get 60 MHASH ++

Yes, you really should. Your optimizing for nvidia, but don't have a 1080 Ti

*Update* 70% - 47 MH/s  (-i 25.5)

[Amph]

is the speed confirmed on pool side?

[brownfly]

Regarding the "skunk", what is current time to mine 1 block using 5 or 6 x 1070?

[sp_]

Regarding the "skunk", what is current time to mine 1 block using 5 or 6 x 1070?

Signatum (Skunk) can be mined on a pool. The miner support stratum connection

Here are some pools

Mining Pool:
https://sigt.suprnova.cc/
https://pool.mn/sigt/
http://lpool.name/
https://onepool.online/
http://hashbag.cc
http://yiimp.ccminer.org
https://pool.coin-miners.info

[du44]

More than 5% blocks of SIGT mined already, with that temp coins will end in one week  

[scryptr]

Regarding the "skunk", what is current time to mine 1 block using 5 or 6 x 1070?

Signatum (Skunk) can be mined on a pool. The miner support stratum connection

Here are some pools

Mining Pool:
https://sigt.suprnova.cc/
https://pool.mn/sigt/
http://lpool.name/
https://onepool.online/
http://hashbag.cc
http://yiimp.ccminer.org
https://pool.coin-miners.info

I MINED 600+ SIGNATUM YESTERDAY--

While mining on "yiimp.ccminer.org" with a single 980ti over a period of 12 hours.  Today, I would be lucky to earn 300 SIGT with the same GPU for the same amount of time.  Miners that mined from launch time earned 1000s of SIGT with small rigs.

I am hoping that scarcity is a good thing.       --scryptr

[finder]

Regarding the "skunk", what is current time to mine 1 block using 5 or 6 x 1070?

Signatum (Skunk) can be mined on a pool. The miner support stratum connection

Here are some pools

Mining Pool:
https://sigt.suprnova.cc/
https://pool.mn/sigt/
http://lpool.name/
https://onepool.online/
http://hashbag.cc
http://yiimp.ccminer.org
https://pool.coin-miners.info

Please check your address, thank you

[e6ug]

any idea why 1060 6gb 9gbs  would only be getting 6.4 mh/s  on sp skunk mod?  that is just over half of what i am getting with 1050ti

Use driver 382.xx and -i 25 in the batfile.

-i 25 bumped it up to 15 mh/s   should i try 26? or is that too much for a 1060 6gb 9gbs?   my 1060 3gb and regular 6gb cards are doing 16-17.5 mh/s

[D8V1D]

any idea why 1060 6gb 9gbs  would only be getting 6.4 mh/s  on sp skunk mod?  that is just over half of what i am getting with 1050ti

Use driver 382.xx and -i 25 in the batfile.

-i 25 bumped it up to 15 mh/s   should i try 26? or is that too much for a 1060 6gb 9gbs?   my 1060 3gb and regular 6gb cards are doing 16-17.5 mh/s

I had 1080 Ti set at -i 25.5, after a while some of the rigs started crashing.
I just set everything back to -i 25, rather have the stability.

[bathrobehero]

Skunk Mod - 7 x 1080 Ti FE (1400watts)

http://imgur.com/a/d1eum

 70%   46 MH/s
100%  50 MH/s

I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.

I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.

Just because you allow the card to use 100% power, it doesn't necessarily mean it will use it. For some algos it does but for others it won't. Check with nvidia-smi or GPU-Z to see how much it actually uses.

Based on the small difference between 70% and 100%, it's probably only really using 75-80%.


Sp_, sen't a pm.

[lupanar]

Found some bug with sp_ skunk_release, if in one rig there is GPUs from different vendors, 5 GPUs from Palit and 1 from Giga like I have, ccminer not working and if it working so not all GPUs(3 from 6 somtimes) are in.
2 different bat files at each vendor cards resolving the issue.

[e6ug]

any idea why 1060 6gb 9gbs  would only be getting 6.4 mh/s  on sp skunk mod?  that is just over half of what i am getting with 1050ti

Use driver 382.xx and -i 25 in the batfile.

-i 25 bumped it up to 15 mh/s   should i try 26? or is that too much for a 1060 6gb 9gbs?   my 1060 3gb and regular 6gb cards are doing 16-17.5 mh/s

I had 1080 Ti set at -i 25.5, after a while some of the rigs started crashing.
I just set everything back the -i 25, rather have the stability.

the 9gbs 1060 must just be bad with skunk algo, now it has dropped back to 10 mh/s

[D8V1D]

Skunk Mod - 7 x 1080 Ti FE (1400watts)

http://imgur.com/a/d1eum

 70%   46 MH/s
100%  50 MH/s

I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.

I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.

Just because you allow the card to use 100% power, it doesn't necessarily mean it will use it. For some algos it does but for others it won't. Check with nvidia-smi or GPU-Z to see how much it actually uses.

Based on the small difference between 70% and 100%, it's probably only really using 75-80%.

Sp_, sen't a pm.

True, I was just basing it off my experience with zec and eth. I have a watt meter and the last 30% will add 800 watts on a 7 GPU 1080 Ti rig.
I haven't measured it from the wall with the Skunks algo though. Hash rate also doesn't increase linearly with increase in power output.

For example Zec: 0.12 KW/h
  70% 4700 H/s = 1400 watts  3.36 w/s  $610 per month
100% 5300 H/s = 2200 watts  2.41 w/s  $634 per month

96% of the profit comes from the first 70%. The added 800 watts at 100% also generates more heat.
In general, its just not worth it to run more than 70% on 1080 Ti.

[bathrobehero]

Skunk Mod - 7 x 1080 Ti FE (1400watts)

http://imgur.com/a/d1eum

 70%   46 MH/s
100%  50 MH/s

I have to run my cards at 70% due to my 1500 watt PSU limit.
Plus it doesn't really make sense to run any algo at 100%, the last 30% it adds 800 watts.

I think there might still be improvements for the Skunk mod.
GPU power usage fluctuates between 49-70% rather than a constant 70%.

Just because you allow the card to use 100% power, it doesn't necessarily mean it will use it. For some algos it does but for others it won't. Check with nvidia-smi or GPU-Z to see how much it actually uses.

Based on the small difference between 70% and 100%, it's probably only really using 75-80%.

Sp_, sen't a pm.

True, I was just basing it off my experience with zec and eth. I have a watt meter and the last 30% will add 800 watts on a 7 GPU 1080 Ti rig.
I haven't measured it from the wall with the Skunks algo though. Hash rate also doesn't increase linearly with increase in power output.

For example Zec: 0.12 KW/h
  70% 4700 H/s = 1400 watts  3.36 w/s  $610 per month
100% 5300 H/s = 2200 watts  2.41 w/s  $634 per month

96% of the profit comes from the first 70%. The added 800 watts at 100% also generates more heat.
In general, its just not worth it to run more than 70% on 1080 Ti.

Yep!

Though EWBF miner is a bit of an oddball.

[rednoW]

Found some bug with sp_ skunk_release, if in one rig there is GPUs from different vendors, 5 GPUs from Palit and 1 from Giga like I have, ccminer not working and if it working so not all GPUs(3 from 6 somtimes) are in.
2 different bat files at each vendor cards resolving the issue.

I see that your  "group buy" post 0.01btc was successful ))