CCminer(SP-MOD) Modded GPU kernels.

[dominuspro]

Can we use mod 10 if we are worried about too much power draw?

4x 1080 Ti on an EVGA 1300 G2.

Check the power draw with:
C:\"Program Files"\"NVIDIA Corporation"\NVSMI\nvidia-smi.exe -l

and set the desired tdp with msi afterburner.

[damstr]

Can we use mod 10 if we are worried about too much power draw?

4x 1080 Ti on an EVGA 1300 G2.

Check the power draw with:
C:\"Program Files"\"NVIDIA Corporation"\NVSMI\nvidia-smi.exe -l

and set the desired tdp with msi afterburner.

You didn't see any spikes? I would like it to never go above 85% pl.

Edit: I use precision x right now and set all my cards to 60% power target.

[dominuspro]

Can we use mod 10 if we are worried about too much power draw?

4x 1080 Ti on an EVGA 1300 G2.

Check the power draw with:
C:\"Program Files"\"NVIDIA Corporation"\NVSMI\nvidia-smi.exe -l

and set the desired tdp with msi afterburner.

You didn't see any spikes? I would like it to never go above 85% pl.

Edit: I use precision x right now and set all my cards to 60% power target.

Please stop using percentuals of the pl... each gpu can have a different default pl and xx% of it doesn't mean anything without the info of the default tdp wattage.
You can see the actual limit in watts with the nvidiasmi command.
Spikes won't go too far above pl and you have a decent psu. I would probably set the limit to 250W.

[dimafatality]

Spreadminer #11 is complete and in testing.

- Fixed exit up on crash. (No more craszy hashrates)

Doesn't work.
https://i.imgur.com/YW1h6Vn_d.jpg

[sp_]

Spreadminer #11 is complete and in testing.
- Fixed exit up on crash. (No more craszy hashrates)

Doesn't work.
https://i.imgur.com/YW1h6Vn_d.jpg

Right. Forgot to merge this fix in.

I have to send out another version.

[pikachuy]

Can we use mod 10 if we are worried about too much power draw?

4x 1080 Ti on an EVGA 1300 G2.

Check the power draw with:
C:\"Program Files"\"NVIDIA Corporation"\NVSMI\nvidia-smi.exe -l

and set the desired tdp with msi afterburner.

You didn't see any spikes? I would like it to never go above 85% pl.

Edit: I use precision x right now and set all my cards to 60% power target.

Please stop using percentuals of the pl... each gpu can have a different default pl and xx% of it doesn't mean anything without the info of the default tdp wattage.
You can see the actual limit in watts with the nvidiasmi command.
Spikes won't go too far above pl and you have a decent psu. I would probably set the limit to 250W.

Don't forget different BIOS have different % factor also.

For example, on the AORUS GeForce GTX 1080 Ti, bios firmware F3 has Default/max:300W/375W, but on F4, it has Default/max:250W/375W. So even if both are the same cards, 75% will not 75% if they are on different bios.

Source: http://www.gigabyte.us/Graphics-Card/GV-N108TAORUS-11GD#support-dl

[damstr]

Can we use mod 10 if we are worried about too much power draw?

4x 1080 Ti on an EVGA 1300 G2.

Check the power draw with:
C:\"Program Files"\"NVIDIA Corporation"\NVSMI\nvidia-smi.exe -l

and set the desired tdp with msi afterburner.

You didn't see any spikes? I would like it to never go above 85% pl.

Edit: I use precision x right now and set all my cards to 60% power target.

Please stop using percentuals of the pl... each gpu can have a different default pl and xx% of it doesn't mean anything without the info of the default tdp wattage.
You can see the actual limit in watts with the nvidiasmi command.
Spikes won't go too far above pl and you have a decent psu. I would probably set the limit to 250W.

Oh yeah forgot about that.

All my cards 60% = 150w 80% = 200w.

[F0rward]

Please stop using percentuals of the pl... each gpu can have a different default pl and xx% of it doesn't mean anything without the info of the default tdp wattage.
You can see the actual limit in watts with the nvidiasmi command.
Spikes won't go too far above pl and you have a decent psu. I would probably set the limit to 250W.

Limit is 120 (so its 300w) , as you can see its jumping above of limit.
https://i.imgur.com/6NCrhXr.jpg

[damstr]

Please stop using percentuals of the pl... each gpu can have a different default pl and xx% of it doesn't mean anything without the info of the default tdp wattage.
You can see the actual limit in watts with the nvidiasmi command.
Spikes won't go too far above pl and you have a decent psu. I would probably set the limit to 250W.

Limit is 120 (so its 300w) , as you can see its jumping above of limit.
https://i.imgur.com/6NCrhXr.jpg

Yeah that makes me nervous with my risers. Also difficulty is around 210 right now. So I don't think I'm going to be dabbling in the spreadminer. Perhaps something else like Nexus.

[zex87]

sp_ any chance you fix 8. 0.05BTC Cryptonite sp-mod (+20%) (3 releases) (18-19MHASH on gtx 1070) (30Mhash 1080ti)

it`s does not work on 1080ti at all, crash at startup, I tried all I could.... pls respond to pm

[sp_]

Working on nexus #7 now.


Then cryptonite #4 and bitcore #2

[sp_]

According to the nicehash calculator a gtx 1070 is now down to $2.3 per day in profit.
 In january 1 gtx 1070 only earned $1.2 at nicehash. So this might the begining of a new crypto iceage  

https://www.nicehash.com/?p=calc

[antantti]

According to the nicehash calculator a gtx 1070 is now down to $2.3 per day in profit.
 In january 1 gtx 1070 only earned $1.2 at nicehash. So this might the begining of a new crypto iceage  

https://www.nicehash.com/?p=calc

Winter is coming (;

[Amph]

Working on nexus #7 now.


Then cryptonite #4 and bitcore #2

interested in the cryptonite

[magnacartic]

Working on nexus #7 now.


Then cryptonite #4 and bitcore #2

Interested to see Nexus CPU time reduction.

[sp_]

Working on nexus #7 now.
Then cryptonite #4 and bitcore #2

Interested to see Nexus CPU time reduction.

Nexus #7:

Early results show around 190MHASH on the gtx 1070. The kernel code is working fine, the miner code/wallet is not. Today I added the abilitiy to select wich gpu's you want per process. similar to the -d parameter in ccminer.

Then the workaround for the 2 core bug is to run the miner in 3 instances with 2 gpu's in each instance.
Seems to work, but still with too much cpu usage. Needs some more work,.

ETA will be next weekend or later.

[trobnor]

Working on nexus #7 now.
Then cryptonite #4 and bitcore #2

Interested to see Nexus CPU time reduction.

Nexus #7:

Early results show around 190MHASH on the gtx 1070. The kernel code is working fine, the miner code/wallet is not. Today I added the abilitiy to select wich gpu's you want per process. similar to the -d parameter in ccminer.

Then the workaround for the 2 core bug is to run the miner in 3 instanses with 2 gpu's in each instance.
Seems to work, but still with too much cpu usage. Needs some more work,.

ETA will be next weekend or later.

Will this outperform spread on 1080 ti's ?

[sp_]

The current spreadcoin network is around 3000 AMD rx 580 cards mining with the opensource miner. If someone add 3000 cards and the price stays the same, the profit goes down to $7.5 a day. So then you can switch to nexus or cryptonite sp-mod to keep the $15 a day.

These coins are not so small, cannot be mined on multipools or nicehash so you don't need to share the profit with the newbies.

NEXUS MCAP $58 MUSD (58th biggest coin in the world)
Spreadcoin MCAP 12 MUSD
Cryptonite MCAP 10.2 MUSD

The market has taken a hit (5 days)

NEXUS MCAP $36.4 MUSD (67th biggest coin in the world)  
Spreadcoin MCAP $7 MUSD
Cryptonite MCAP  $6,9  MUSD

( http://coinmarketcap.com/ )

[antantti]

interested in the cryptonite

I will be all over you if you post your 1080ti numbers after sp_ mod. Just saying.

[sp_]

The spreadcoin profit is $15 per day on the 1080ti with the sp-mod #10 fixed 3 private binary (0.05BTC)

the sp mod miner 0.05btc will get free update in future?

Yes. But spreadminer is release #10. The miner is stable and I am happy with the speed, so don't rhink
there will be more releases.

The profit has declined to $5.7 per day per 1080ti..

Spreadminer sp-mod #11 abit faster