CCminer(SP-MOD) Modded GPU kernels.

[sp_]

Mining Nexus is very profitable at the current pricelevels..


Nexus sp-mod #6 stable private miner (0.05 btc)

[Amph]

not like bitcore, last time i mined nexus i made only 9 blocks a day with two rig, a block is 0.0045 btc total = 0.04 a day

but the next day i made something like 1 block in 8 hours...

[boo50]

bitcore increase difficulty everyday, seems like just few days left for profitable mining.

[bathrobehero]

someone know if the mini 1070 is good for mining, like the kfa2 mini oc, i heard they throttle a lot

I only used 970 minis (so higher power than 1070) but never again. Super loud, throttles a lot and slower even without termal throttling.

[cashen]

I'm using ccminerAlexis78.exe and its appears to hang n initializing my GPUs with some algos. Skein is one which takes up 2 mins to get to full speed and sometimes never initializes 1 or 2 of the cards

any ideas?

[minerx117]

someone know if the mini 1070 is good for mining, like the kfa2 mini oc, i heard they throttle a lot

I only used 970 minis (so higher power than 1070) but never again. Super loud, throttles a lot and slower even without termal throttling.

i only run the 1070 mini itx they are great i get exactly the same hash per watt as the G1 gaming just make sure there have plenty of cold air flow ! only 1 single 90mm fan but they do work well i run @115-120watts so thermal throttle is not a issue for me , they are the cheapest version of the 1070 in my country by $50 per card add's up when you buy 14 card : ) im buying another 6 soon as they seem to be going out of stock my local store said they only have whats on hand they are not ordering anymore.... im not sure if there is a refreshed version coming soon to replace them....

note: i dont use  kfa2 mini oc   i use  GV-N1070IXOC-8GD  http://www.gigabyte.com/Graphics-Card/GV-N1070IXOC-8GD#kf

[sp_]

bitcore increase difficulty everyday, seems like just few days left for profitable mining.

I think I can make a 30% faster miner, but waiting until the coin is listed on a proper exchange like bittrex or poloniex.. Might sell the mod with sourcecode and increase the price to 0.2BTC. Linux support, fewer buyers, more profit for the buyers.

[sp_]

I'm using ccminerAlexis78.exe and its appears to hang n initializing my GPUs with some algos. Skein is one which takes up 2 mins to get to full speed and sometimes never initializes 1 or 2 of the cards
any ideas?

Doesn't work properly if you have more than 4 cards and a 2 core processor.

Use ccminer 2.0

[_javi_]

Can you mine bitcore at yiimp to a cryptopia generated wallet address??

[minerx117]

I'm using ccminerAlexis78.exe and its appears to hang n initializing my GPUs with some algos. Skein is one which takes up 2 mins to get to full speed and sometimes never initializes 1 or 2 of the cards
any ideas?

Doesn't work properly if you have more than 4 cards and a 2 core processor.

Use ccminer 2.0

ccminerAlexis78.exe works great Do note that on mining rigs with multiple GPUs you might need to increase the amount of virtual memory (SWAP file) if you have less system memory in order to be able to run the miner with the default high intensity. On a 6x GTX 1070 GPUs mining rig with 8GB RAM we’ve had to increase the virtual memory to 30GB in order to be able to run the miner properly at the default intensity
"on my 6x1070 rigs  i only run 2gb ram and have Virtual Mem set to 32-40gb it runs perfect... i monitor cpu usage my g1820t hardly goes over 50%usage dualcore @2.4ghz...." tip- use a ssd not hdd

[cashen]

I'm using ccminerAlexis78.exe and its appears to hang n initializing my GPUs with some algos. Skein is one which takes up 2 mins to get to full speed and sometimes never initializes 1 or 2 of the cards
any ideas?

Doesn't work properly if you have more than 4 cards and a 2 core processor.

Use ccminer 2.0

ccminerAlexis78.exe works great Do note that on mining rigs with multiple GPUs you might need to increase the amount of virtual memory (SWAP file) if you have less system memory in order to be able to run the miner with the default high intensity. On a 6x GTX 1070 GPUs mining rig with 8GB RAM we’ve had to increase the virtual memory to 24GB in order to be able to run the miner properly at the default intensity
"on my 6x1070 rigs  i only run 2gb ram and have Virtual Mem set to 32-40gb it runs perfect... i monitor cpu usage my g1820t hardly goes over 50%usage dualcore @2.4ghz...." tip- use a ssd not hdd

Thank you. I'll try tht now. I had 16-32GB, changed to 32-48gb.

I'm runnning 7x1080s

[cashen]

The other odd thing is it starts mining before all the cards are set. Its almost like once the mining starts on 1 cards its super slow to start the others.

[sp_]

Can you mine bitcore at yiimp to a cryptopia generated wallet address??

Should work. Did you try it?

[bensam1231]

bitcore increase difficulty everyday, seems like just few days left for profitable mining.

I think I can make a 30% faster miner, but waiting until the coin is listed on a proper exchange like bittrex or poloniex.. Might sell the mod with sourcecode and increase the price to 0.2BTC. Linux support, fewer buyers, more profit for the buyers.

Sounds good.


Huge SIA pump, FYI if you mine dual coins. It's the more profitable then Zcash right now for 1070s.

[Epsylon3]

I think I can make a 30% faster miner, but waiting until the coin is listed on a proper exchange like bittrex or poloniex.. Might sell the mod with sourcecode and increase the price to 0.2BTC. Linux support, fewer buyers, more profit for the buyers.

[minerx117]

I think I can make a 30% faster miner, but waiting until the coin is listed on a proper exchange like bittrex or poloniex.. Might sell the mod with sourcecode and increase the price to 0.2BTC. Linux support, fewer buyers, more profit for the buyers.

: )

[bensam1231]

Does anyone know if there is a way to send a ctrl + C event to a miner window with a batfile? Just killing the process doesn't always work out well and causes a driver reset.

[sp_]

What are you getting in the bitcore algo?

I compiled ccminer 2.0 and get this with -i 21

gtx 1060 3gb 10.3MHASH
gtx 1070 16MHASH
gtx 970  8MHASH

sounds about right?

[Amph]

that is the normal hash everyone get yes

[pallas]

I modified it a bit to allow intensities up to 23.5 on 8GB cards.