CCminer(SP-MOD) Modded GPU kernels.

[sp_]

I only have one card for mining.  Second card is just for Windows and gaming.

then 12gb should be enough. Old driver? upgrade to the latest

[CazeW]

I only have one card for mining.  Second card is just for Windows and gaming.

then 12gb should be enough. Old driver? upgrade to the latest

Yeah, I'm using 391.24 from 2018.3.20. Friend literally updated minutes ago and his machine became completely unstable so I guess there's still some instability with the 397 drivers. Might give them a try later.

[cryptotamer01]

Any c11 miner faster than alexis and anorganix phi?

[sp_]

The sp-mod private is the fastest, why do you ask?

[sp_]

All the yiimp based pools are cheating you.

If you run with a higher difficulty like -p d=40 instead of vardiff you gain 5% but the pool doesn't find more blocks. That's why you should solomine...

Live x16r stats:

[JackIT]

All the yiimp based pools are cheating you.

If you run with a higher difficulty like -p d=40 instead of vardiff you gain 5% but the pool doesn't find more blocks. That's why you should solomine...

Live x16r stats:

 

STOP SPREADING FUD.


Not reported, just means that rvnstats.info doesn't have the data necessary to populate the results. for example, private mining farms with their own pools, as well as one of the largest RVN pools F2pools, and many other small pools do not publish stats

[cryptotamer01]

The sp-mod private is the fastest, why do you ask?

Beacuse i need a fast c11 miner. i am mining stipend atm and i need a comparison of yours with the other faster ones.

[sp_]

+5-10% from alexis 1.0

[rednoW]

The sp-mod private is the fastest, why do you ask?

all your claims about your "fastest" private miners were beaten by Enemy. And Enemy is not the best Cuda coder )) Just imagine what speed private alexis miner has )) 

[cryptotamer01]

The sp-mod private is the fastest, why do you ask?

all your claims about your "fastest" private miners were beaten by Enemy. And Enemy is not the best Cuda coder )) Just imagine what speed private alexis miner has )) 

Unfortunately enemy does not work on c11.

[bensam1231]

You can't fucking run x16r for a hour and figure out what's the fastest. You better be doing roughly 24 hours of testing before doing that. I mention that because I've seen pretty big swings over the course of 24 hours, we're talking pool side, not client side. Client side testing is pointless.

Don't be a dumbass and make three pages out of a half of one. No one wants to read your loud screams.

Also take a dose of your own humility.

You saying that it is, doesn't make it true

...period

I'd suggest you stay out of a discussion you know very little about.

Reading comprehension, goes a long way. look into it.

you can start by reading this: https://bitcointalk.org/index.php?topic=3385643.msg36628995#msg36628995
and the first post: https://bitcointalk.org/index.php?topic=3385643.msg35471685#msg35471685

I'd suggest you stop acting like a hypocrite, it goes a long way for credibility.

Also where does that come into play in this thread when you just talk about 'rounds'? A round on a pool is the work on a certain block. I'm sorry for not reading your mind and your ambiguous terminology that you make up on the spot that's already used for other technical definitions. Or do you talk about hours in such a way to convey a certain amount of self-import regarding you turning a miner on?

https://en.wikipedia.org/wiki/Mining_pool#Proportional

Maybe you should figure out what you're talking about before you actually talk about it?


Jesus I'm not even going to start tearing down your test results, right off the bat you think setting intensity on three different miners is the same thing? Different miners can run at different intensities and contribute the same amount of work or some with less intensity then another running with more depending on how they're coded. That's why the intensity tuning game is still very much a part of being an experienced miner... or for the sake of testing you run them at default, whatever that is, however doesn't represent a tuned rig. A good tester would find the optimal intensity for all miners they're testing.

[JackIT]

You can't fucking run x16r for a hour and figure out what's the fastest. You better be doing roughly 24 hours of testing before doing that. I mention that because I've seen pretty big swings over the course of 24 hours, we're talking pool side, not client side. Client side testing is pointless.

Don't be a dumbass and make three pages out of a half of one. No one wants to read your loud screams.

Also take a dose of your own humility.

You saying that it is, doesn't make it true

...period

I'd suggest you stay out of a discussion you know very little about.

Reading comprehension, goes a long way. look into it.

you can start by reading this: https://bitcointalk.org/index.php?topic=3385643.msg36628995#msg36628995
and the first post: https://bitcointalk.org/index.php?topic=3385643.msg35471685#msg35471685

I'd suggest you stop acting like a hypocrite, it goes a long way for credibility.

Also where does that come into play in this thread when you just talk about 'rounds'? A round on a pool is the work on a certain block. I'm sorry for not reading your mind and your ambiguous terminology that you make up on the spot that's already used for other technical definitions. Or do you talk about hours in such a way to convey a certain amount of self-import regarding you turning a miner on?

https://en.wikipedia.org/wiki/Mining_pool#Proportional

Maybe you should figure out what you're talking about before you actually talk about it?


Jesus I'm not even going to start tearing down your test results, right off the bat you think setting intensity on three different miners is the same thing? Different miners can run at different intensities and contribute the same amount of work or some with less intensity then another running with more depending on how they're coded. That's why the intensity tuning game is still very much a part of being an experienced miner... or for the sake of testing you run them at default, whatever that is, however doesn't represent a tuned rig. A good tester would find the optimal intensity for all miners they're testing.

You're obviously an idiot or troll, or both; I choose not to engage in a discussion with either.

[Haik]

Someone used gtx 980ti with spmod or 2.2.5 version and can share best overclock settings?

On what algo? 

x16r and phi

[tbearhere]

Someone used gtx 980ti with spmod or 2.2.5 version and can share best overclock settings?

On what algo?  

x16r and phi

On x16r. I start out with power limit @70%... Core 0... but you could increase it a little ... say 50+. And memory +200 works without crashing. You could get more hashrate ..but at a higher cost of electricity. Experiment ..see what gets you the highest hash per watt.

[RetroShag]

I'm sharing code on github opensource for all of you to enjoy. I am adding some juice and releasing a faster x16r exe soon.
Free no devfee. spmod-git #4A

https://github.com/sp-hash/suprminer/releases

I receive cpu validation error on bitcore, x16s and timetravel (keccak) using spmod-git #4a on 1080ti and ryzen 1700.  Other than it's faster than 2.2.5 miner.

[bensam1231]

You can't fucking run x16r for a hour and figure out what's the fastest. You better be doing roughly 24 hours of testing before doing that. I mention that because I've seen pretty big swings over the course of 24 hours, we're talking pool side, not client side. Client side testing is pointless.

Don't be a dumbass and make three pages out of a half of one. No one wants to read your loud screams.

Also take a dose of your own humility.

You saying that it is, doesn't make it true

...period

I'd suggest you stay out of a discussion you know very little about.

Reading comprehension, goes a long way. look into it.

you can start by reading this: https://bitcointalk.org/index.php?topic=3385643.msg36628995#msg36628995
and the first post: https://bitcointalk.org/index.php?topic=3385643.msg35471685#msg35471685

I'd suggest you stop acting like a hypocrite, it goes a long way for credibility.

Also where does that come into play in this thread when you just talk about 'rounds'? A round on a pool is the work on a certain block. I'm sorry for not reading your mind and your ambiguous terminology that you make up on the spot that's already used for other technical definitions. Or do you talk about hours in such a way to convey a certain amount of self-import regarding you turning a miner on?

https://en.wikipedia.org/wiki/Mining_pool#Proportional

Maybe you should figure out what you're talking about before you actually talk about it?


Jesus I'm not even going to start tearing down your test results, right off the bat you think setting intensity on three different miners is the same thing? Different miners can run at different intensities and contribute the same amount of work or some with less intensity then another running with more depending on how they're coded. That's why the intensity tuning game is still very much a part of being an experienced miner... or for the sake of testing you run them at default, whatever that is, however doesn't represent a tuned rig. A good tester would find the optimal intensity for all miners they're testing.

You're obviously an idiot or troll, or both; I choose not to engage in a discussion with either.

Person provides points, just act like they don't have any merit because they're a 'troll' then move on. Yup. Also 'woops' with the intensity bit, guess you'll have to do a bit more research.

[sp_]

I have now reached 41.5MHASH in the pi algos on the 1080ti. A nice 0-5-1MHASH bost from phi sp-mod #2. (lux coin)

here is a snapshot from lux sp-mod #2 :

[_Dr2]

@SP_
May You to compile Raven x16r/x16s mod with CUDA 9.2 support?
It may be intresting solution.

[omshree]

I have now reached 41.5MHASH in the pi algos on the 1080ti. A nice 0-5-1MHASH bost from phi sp-mod #2. (lux coin)

here is a snapshot from lux sp-mod #2 :

When will you release the new sp-mod #3?

[nsummy]

I have now reached 41.5MHASH in the pi algos on the 1080ti. A nice 0-5-1MHASH bost from phi sp-mod #2. (lux coin)

here is a snapshot from lux sp-mod #2 :

When will you release the new sp-mod #3?

Dude that is the best bitcoin address ever!