CCminer(SP-MOD) Modded GPU kernels.

[sp_]

What are you getting on the AMD cards for verthash?

Your version pops an error.  I tried to compile it several times.  Any clues?       --scryptr

Use windows. The makefile hasn't been updated for a while. Legacy miners isn't giving you any profit..

[moderator's note: consecutive posts merged]

[scryptr]

NO VERTHASH MINING YET--

My Win7 box attacked the available VertHashMiner on download, I can't run it.  All my miners are Linux.

I am waiting for an optimized miner for VertHash from PhoenixMiner or TRM.  It may be a while.  My 3GB 1060 cards are mining Raven.

VertHash can fit on a 2GB card.       --scryptr

EDIT: 30kH/s on a GTX 750ti--

I set up the Vert-OCM (One-Click Miner) and ran it.  A 750ti will get about 30kH/s, and earn about 1/3 VTC a day.  I have a Win 10 box that is usually busy, and I re-tasked it.  The miner self-installed and finally ran after maybe 45 minutes.

This miner apparently installs a wallet?  I could not easily see the address it was mining to.  This miner is a shell script to operate VertHashMiner by CryptoGraphics.  I'll look at it more later.

I'd rather see a CCminer version optimized for CUDA.       --scryptr

[sp_]

I get 560khash on the sappshire 580 pulse 4gb 1900 memclock. Will release a binary with 1% fee soon.

[scryptr]

I get 560khash on the sappshire 580 pulse 4gb 1900 memclock. Will release a binary with 1% fee soon.

I MINE ON LINUX--

I have a number of R7, R9, RX, FURY, VEGA, etc.. cards, and I don't mind a 1% fee to you, but I'll need Linux binaries.  I could set up a 2-slot breadboard PC with Winblows, but it won't earn much in the way of fees or profits.

I have a real surplus of older cards, and they could go on ebay, or back to work in 4-6 card Linux rigs.  If your hash rates are good enough, I might ROI my R9 antiques again rather than sell them.  On ebay, the market looks good.

--scryptr

[miner29]

NO VERTHASH MINING YET--

My Win7 box attacked the available VertHashMiner on download, I can't run it.  All my miners are Linux.

I am waiting for an optimized miner for VertHash from PhoenixMiner or TRM.  It may be a while.  My 3GB 1060 cards are mining Raven.

VertHash can fit on a 2GB card.       --scryptr

EDIT: 30kH/s on a GTX 750ti--

I set up the Vert-OCM (One-Click Miner) and ran it.  A 750ti will get about 30kH/s, and earn about 1/3 VTC a day.  I have a Win 10 box that is usually busy, and I re-tasked it.  The miner self-installed and finally ran after maybe 45 minutes.

This miner apparently installs a wallet?  I could not easily see the address it was mining to.  This miner is a shell script to operate VertHashMiner by CryptoGraphics.  I'll look at it more later.

I'd rather see a CCminer version optimized for CUDA.       --scryptr

Ditto...

[scryptr]

I get 560khash on the sappshire 580 pulse 4gb 1900 memclock. Will release a binary with 1% fee soon.

VERTCOIN IS SECOND ONLY TO ETHEREUM TODAY--

What-to-Mine has ranked VTC second only to ETH today.  The 3 default "RX 480s" are rated at 1.32MH/s, and earning $3.49 a day.

If your miner drives an RX 580 at 560kH/s, three of them would produce 1.68MH/s, and earn $4.44 a day.  Still, second only to ETH.

--scryptr

[sp_]

SPMiner 1 Released for vertcoin. 1% dev fee. check it out.

https://github.com/sp-hash/SPMiner/releases/tag/SPMiner

I can reach more than 590H/s with this modded straps bios on the 580-4gb-sapphire-nitro+

https://maxhash.org/knowledge-base/amd-rx-580-4gb-sapphire-nitro-hynix-elpida/

Elpida memory and oc on the memory in msi afterburner

Try:
1411 core and 2050 on the memory


SPMiner for vertcoin Sappshire nitro+ 4GB with elpida memory

bios can be downloaded here (1411 core and 1900 memclock)

https://maxhash.org/knowledge-base/amd-rx-580-4gb-sapphire-nitro-hynix-elpida/

Latest AMD adrenaline drivers on Windows 10

All my miners are Linux.

I might release for linux later

VERTCOIN IS SECOND ONLY TO ETHEREUM TODAY--

Zombie mode is working pretty bad on windows. SPMiner is the most profitable right now on the 4GB cards. I am currently working on a fast ethereum miner for nvidia cards.

[moderator's note: consecutive posts merged]

[scryptr]

All my miners are Linux.

I might release for linux later

MY WIN 7 BOX RUNS SPMINER--

I get ~310kH/s at the console and the pool is reporting ~200kH/s.  Lots of rejects, ~25%.  My GTX 1060 3GB is clocked -100/+600 core/mem.

As I type this I have not run 1 hour yet.  There were no problems with my AV, and the "start.bat" was easy to modify.

I have 8 1060 3GB that could be racked and set to mine.  If VTC out earns RVN, I'll rack them.  The rig will be Linux.

--scrypt

[sp_]

Lots of rejects, ~25%.  My GTX 1060 3GB is clocked -100/+600 core/mem.

Which pool? Perhaps the memory clock is too high? Rejects should be less than 1% if you have low ping. (read the ping in the miner window (xxx ms) .

[scryptr]

Lots of rejects, ~25%.  My GTX 1060 3GB is clocked -100/+600 core/mem.

Which pool? Perhaps the memory clock is too high? Rejects should be less than 1% if you have low ping. (read the ping in the miner window (xxx ms) .

ZERGPOOL, WITH HIGH PING--

The miner seems to behave a little better after a few restarts.  Still really early for a conclusion.       --scryptr

EDIT: The ping is in the 1000s.  This PC is really laggy, I keep a lot of webpages open and just the single 1060 for a GPU.  The pool is crediting me with about 1/100 of a VTC per block.  There may be 1000 other miners at the pool, but disconnects inflate that stat.  VTC is accounting for a portion of my earnings already, moving up the list.  Let me watch for a day or so.

I have 4 R9 380 2GB cards, and 280X cards, and FURYs, etc.  If VTC is a real earner, they can be put on the rack.  But, I need Linux binaries at the least.  Preferably able to run on kernel 4.15, and older drivers (CUDA 9/10, AMD 18.1).

--scryptr

[exsexs1]

@sp_ Please release linux versions. Nobody mine under Windows in 2021.

[sp_]

I have improved the reject rate on p2p pool. Will test on zergpool now.

[pallas]

@sp_ Please release linux versions. Nobody mine under Windows in 2021.

He can do Amiga but not Linux. Quite weird.

[sp_]

I will make a build on linux later

EDIT: The ping is in the 1000s.  This PC is really laggy,

It's not the pc, it's the pool. Change the pool. I get 50 ping on other pools.

(stratum+tcp://verthash.eu.mine.zergpool.com:4534)

[2021-02-28 20:34:56]  Stratum requested work restart
[2021-02-28 20:34:56]  Rejected: 37/38 (97.37%), 1962.99 kH/s (509ms)
[2021-02-28 20:34:56]  reject reason: Invalid job id
[2021-02-28 20:34:57]  Rejected: 37/39 (94.87%), 1962.99 kH/s (564ms)
[2021-02-28 20:34:57]  reject reason: Invalid share

I will submit another build with improved reject rates later today


Uploaded a fixed version wich reduce the rejects on some pools

https://github.com/sp-hash/SPMiner/releases/tag/SPMiner

spminer4-fix.7z


[moderator's note: consecutive posts merged]

[scryptr]

Uploaded a fixed version wich reduce the rejects on some pools

https://github.com/sp-hash/SPMiner/releases/tag/SPMiner

spminer4-fix.7z

15% REJECT RATE--

I have been mining about 8 hours.  30-plus blocks have been found at the pool, and my GTX 1060 3GB has earned more than 1/3 VTC.

About 2 hours was with your initial upload.  About 6 hours with fix #1.  I just started mining with fix #4.  Currently I am still on ZergPool, whether it is the best/easiest pool or not.  The 1060 is a solid earner, an 8-card rig would bring in good ju-ju weekly.

Hoping fix #4 is good, l8r...       --scryptr

[JayDDee]

MY WIN 7 BOX RUNS SPMINER--

I get ~310kH/s at the console and the pool is reporting ~200kH/s.  Lots of rejects, ~25%.  My GTX 1060 3GB is clocked -100/+600 core/mem.

As I type this I have not run 1 hour yet.  There were no problems with my AV, and the "start.bat" was easy to modify.

I have 8 1060 3GB that could be racked and set to mine.  If VTC out earns RVN, I'll rack them.  The rig will be Linux.

--scrypt

What speed do you get with verthashminer? I get 406 kH/s with a 1070, default settings, 3% rejects.
Verthashminer is open source with no fee.

[logitex1]

I think I will opensource my verthash miner. Vertcoin has been there since the beginning and I like that they constantly change the algorithm to avoid asics. The price of the coin is low, and the team is professional. Let's mine and buy some vertcoins guys!

This would be awesome if you followed through with this!

[scryptr]

MY WIN 7 BOX RUNS SPMINER--

I get ~310kH/s at the console and the pool is reporting ~200kH/s.  Lots of rejects, ~25%.  My GTX 1060 3GB is clocked -100/+600 core/mem.

As I type this I have not run 1 hour yet.  There were no problems with my AV, and the "start.bat" was easy to modify.

I have 8 1060 3GB that could be racked and set to mine.  If VTC out earns RVN, I'll rack them.  The rig will be Linux.

--scryptr

What speed do you get with verthashminer? I get 406 kH/s with a 1070, default settings, 3% rejects.
Verthashminer is open source with no fee.

0 HASH WITH VERTHASHMINER--

My Win 7 box locked VHM out, I can not run it.  A 750ti on my Win 10 box gets 30kH/s, or 1/3 VTC per day.       --scryptr

[sp_]

I have tested the 4 build for 12 hours now and looking good. 99.98% accepted shares on mining poolhub (~160ms ping). 2500khash in the miner window and peaks at 2850 on the pool.




But crashed after 13 hours.. I need to release a fix


fix5 released.

[moderator's note: consecutive posts merged]

[JayDDee]

0 HASH WITH VERTHASHMINER--

My Win 7 box locked VHM out, I can not run it.  A 750ti on my Win 10 box gets 30kH/s, or 1/3 VTC per day.       --scryptr

Weren't you complaining because you wanted Linux support? Well, VHM is free and supports Linux.