sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
April 22, 2021, 12:14:07 PM |
|
Hey sp_
i can´t connect to zergpool or to mining-dutch. Same problem as in the previous version.
F2pool work, hashalot work also.
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
April 22, 2021, 02:46:52 PM Last edit: April 22, 2021, 05:20:39 PM by scryptr |
|
I MINE WITH LINUX--
Here is what I posted on the TeamRedMiner Discord today:
"scryptr — Today at 8:16 AM
I have 4X Nitro+ 4GB RX580 w/Elpida. Clocks 1250/1870, hash 540kH/s per GPU. Seems stable overnight. I get some rejects, wheras mining Haven (XHV) I had near 0 yesterday with TRM 8. Currently 2 rejects out of 180 accepts, ~1% The straight-to-memory verthash.dat is a really nice touch."
This was performed on an ethOS rig with older AMD drivers. It is a modded Ubuntu 14.04 based system. The developers abandoned the system.
My 1050ti cards are mining UBQ at about 13.5MH/s per card with PhoenixMiner 5.5c in an ethOS rig. They are steady with near zero rejects. ZergPool rates UBQ more profitable than VTC. I am mining both coins on ZergPool (using ethOS) and will compare for myself.
The VertHash free miner will not run on ethOS, it calls for libraries not present. Please make a static build capable of running on the older linux system. TRM works well on ethOS, but only runs on AMD cards. TRM just released v8.2 with VTC today.
--scryptr
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
April 22, 2021, 09:27:56 PM Last edit: April 22, 2021, 09:38:39 PM by sp_ |
|
Working on spminer #4 Faster start(5 seconds), fewer rejects, ZIL support. +++ And Linux support Not working alone anymore. Supported by Team Black ( www.pouet.net)
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
April 22, 2021, 09:49:14 PM |
|
I can't use your suggested cores setting because energy doesn't come cheap here, so I stick with 1190/840 2090/840 with Matthews straps for eth/Monero
I tested your spminer3 and trm,(and srbminer) with the same setting on the same 6 "sisters" rx 570 itx elpida cards at the same time using 3 accounts.
TRM seem to be faster than your 488 Khs/ cards just going a little over 500....................................with SRB coming 3rd
But surprise surprise. miningpoolhub just see the opposite and paid accordingly! gGving spminer card a 10% $$ advantage compared to the other two. It was 24 hour, so it can't be luck. And its enough clear for me.
only weird thing? your 1 % seem to be 1 % but it comes in a weird way in one big shot
But from tomorrow, you know what I am using right ? Unless etc keep increasing, of course...
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
April 22, 2021, 09:56:41 PM Last edit: April 23, 2021, 12:58:06 PM by sp_ |
|
I can't use your suggested cores setting because energy doesn't come cheap here, so I stick with 1190/840 2090/840 with Matthews straps for eth/Monero
The card in the picture is using 120watt in the wall. Sapphire nitro+ rx 580 Polaris bios editor 1 click strap. -20% powerlimit in MSI afterburner. Latest adrenaline driver
|
|
|
|
ASCiiDiTY
Jr. Member
Offline
Activity: 40
Merit: 1
|
|
April 22, 2021, 11:26:08 PM |
|
Not working well for p106 rig, lower hashrate and huge rejected shares: This is an old bug. When loading the file into gpumemory with more than 2 gpu's, 2 core celeron and 4gb memory it lags abit. But it's only happening at startup. Still SPminer#1 remains the best for this rig.
Kernel #1 was tuned for pascal cards and cuda 10.2 Kernel #2 was tuned for rtx cards and cuda 11.2 I will try to include them both in the same build. Or build a seperate cuda 10.2 version. Okay thanks. If you can't combine them, please add a v1 fix 14 with Zil miner switch if possible, that would be great.
|
Vertcoin PPLNS Pool | 0.69% fee | 0.05 VTC min payout: ACiDPOOL.CO.UK (http://acidpool.co.uk/)
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
April 23, 2021, 04:32:56 PM Last edit: November 08, 2021, 01:37:23 PM by mprep |
|
I have added a cuda 10.2 build of #3 rtx 3xxx cards fail with this build. I tested it and it gives Improved hashrate on compute 6.1 Also added faster startup. https://github.com/sp-hash/SPMiner/releases/spminer3_cuda10.2.7z 04ae6e28c414d290e7afb9554d9caacc6e6a57438cefc7717176849246456ffd
Okay thanks. If you can't combine them, please add a v1 fix 14 with Zil miner switch if possible, that would be great.
What hashrate are you getting on the P106-090 with the spminer 3 cuda 10.2 build?
i can´t connect to zergpool or to mining-dutch. Same problem as in the previous version.
It's on the todo list. Linux support is working on opencl, but cuda has performance problems. [moderator's note: consecutive posts merged]
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
April 23, 2021, 05:27:04 PM |
|
i can´t connect to zergpool or to mining-dutch. Same problem as in the previous version.
It's on the todo list. Linux support is working on opencl, but cuda has performance problems. THANKS FOR LINUX SUPPORT-- I hope that it will run standalone, with no library calls. VertHash is my top earner for my smaller GPUs. I have 12 GTX 1060 3GB that would be better off mining VTC. UbqHash keeps producing false orphans; the wallet is flawed. The orphan can be corrected if the pool operator takes the time. Waiting for the Linux version... --scryptr
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
April 24, 2021, 08:47:53 PM |
|
SPminer for vertcoin New version released
- Faster startup - Fixed startup difficulty bug - added intensity option for opencl devices
spminer3_cuda10.2_fix1.7z spminer3_fix1.7z
|
|
|
|
ASCiiDiTY
Jr. Member
Offline
Activity: 40
Merit: 1
|
|
April 26, 2021, 02:29:27 AM |
|
Okay thanks. If you can't combine them, please add a v1 fix 14 with Zil miner switch if possible, that would be great.
What hashrate are you getting on the P106-090 with the spminer 3 cuda 10.2 build? Only 317kh per card :/ I'm having a problem with spminer 1 in the donation period? Please see this video: https://streamable.com/mf6papIt seems to be going on for ages? When will it stop? Is it always like this? I just setup a new rig with 6 cards and it is happening now while I'm trying to test.
|
Vertcoin PPLNS Pool | 0.69% fee | 0.05 VTC min payout: ACiDPOOL.CO.UK (http://acidpool.co.uk/)
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
April 26, 2021, 05:39:31 AM |
|
I'm having a problem with spminer 1 in the donation period? Please see this video:
Did you add enough virtual memory to the rig? 32gb should be enough. spminer1 has known issues, and you should upgrade. #4 is coming soon,. Working stable on linux now- The hashrate is looking good.
|
|
|
|
ASCiiDiTY
Jr. Member
Offline
Activity: 40
Merit: 1
|
|
April 26, 2021, 04:38:09 PM Last edit: April 26, 2021, 11:07:21 PM by ASCiiDiTY |
|
I'm having a problem with spminer 1 in the donation period? Please see this video:
Did you add enough virtual memory to the rig? 32gb should be enough. spminer1 has known issues, and you should upgrade. #4 is coming soon,. Working stable on linux now- The hashrate is looking good. I had it set to 20gb. I will try 32 soon, just reinstalling windows. Maybe this is it. I removed one card so only 5 and it works, but I get a lot of rejected shares (20%~) on mining pool hub with the 5 cards in spminer 1, all with returned reason of "low difficulty share" is this just because my hashrate is much higher now, is it okay to ignore this? I think maybe there is an issue with my windows install as I had some blue screens, after I reinstall I will test again and report back. Image of "low diff share" rejects: https://ibb.co/7G79nSgI want to use a newer version but all of them have much lower hashrate for me, it's like losing a whole card. PS: verthash miner was also crashing with 6 cards not just spminer. The error was something like 700 unable to allocate to device memory" EDIT: I might of found the problem, one of my cards doesn't like being undervolted as much as the others and was causing the crash I think, need to do more testing but seems stable right now. EDIT2: stable again, just need to rework undervolts: https://ibb.co/3NwRX9z
|
Vertcoin PPLNS Pool | 0.69% fee | 0.05 VTC min payout: ACiDPOOL.CO.UK (http://acidpool.co.uk/)
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
April 27, 2021, 07:49:16 PM Last edit: November 08, 2021, 01:36:05 PM by mprep |
|
EDIT2: stable again, just need to rework undervolts: I have managed to restore cuda 10.2 performance in the spminer #4 cuda 11.2 build on the gtx 1070, but not sure about the P104-090.. Zil switch implemented Disable mining while zil is active. (auto generation of verthash.dat added. Zergpool working. linux support. Next is to create a static linux build. Plan to release in a few days.
spminer for vertcoin #4 has been released https://github.com/sp-hash/SPMiner/releases7423e20593f1e39442b152d0de9183a339c744e7a5f549d734dc1bd2fac2ba3d spminer4.7z - Restore cuda 10.2 performance from #1 - zilliqa switch implemented Disable mining while zilminer is active. - Auto generation of verthash.dat added. - Fixed Zergpool and improved the stratum code (fewer rejects) - Stop mining on disconnection - Faster GPU init and mining start (1 second dag creation)
But surprise surprise. miningpoolhub just see the opposite and paid accordingly! giving spminer card a 10% $$ advantage compared to the other two. It was 24 hour, so it can't be luck. And its enough clear for me.
Thanks for testing. With zil dual mining in spminer #4, you can get another +15% profit.Spminer is the fastest miner, the most profitable and the most stable miner for vertcoin. [moderator's note: consecutive posts merged]
|
|
|
|
miner29
|
|
April 28, 2021, 04:30:53 PM |
|
But surprise surprise. miningpoolhub just see the opposite and paid accordingly! giving spminer card a 10% $$ advantage compared to the other two. It was 24 hour, so it can't be luck. And its enough clear for me.
Thanks for testing. With zil dual mining in spminer #4, you can get another +15% profit.Spminer is the fastest miner, the most profitable and the most stable miner for vertcoin. Just need linux support man
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
April 28, 2021, 08:57:08 PM |
|
Which etash miner have you used for testing with spminer4 ? with which pool?
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
April 28, 2021, 09:42:16 PM |
|
Which etash miner have you used for testing with spminer4 ? with which pool?
SP_ HAS TESTED SEVERAL POOLS-- For VertHash mining. If you have a typo, correct it please. I can't really understand your post with the current spelling. --scryptr
|
|
|
|
ASCiiDiTY
Jr. Member
Offline
Activity: 40
Merit: 1
|
|
April 29, 2021, 01:17:55 AM |
|
EDIT2: stable again, just need to rework undervolts: I have managed to restore cuda 10.2 performance in the spminer #4 cuda 11.2 build on the gtx 1070, but not sure about the P104-090.. Zil switch implemented Disable mining while zil is active. (auto generation of verthash.dat added. Zergpool working. linux support. Next is to create a static linux build. Plan to release in a few days. Sounds good. I will test SPminer #4 in the morning and report back. EDIT: hashrate is still much lower with spminer #'4: https://ibb.co/sm1QNcN
|
Vertcoin PPLNS Pool | 0.69% fee | 0.05 VTC min payout: ACiDPOOL.CO.UK (http://acidpool.co.uk/)
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
April 29, 2021, 03:18:27 AM |
|
Thank you Script. I will try to explain better.
Spminer 4 major difference from the previous versions is the possibility to dual mine VTC+ZIL. In order to dual mine with two different algos, or you need a miner that work in in multimode, only one being srbminer as far as I know, or you need zilswitcher and two different miners one for etash and one for VTC.
As you can see in the new release (if you have opened it..) there are 8 bat files, and 4 of them are for dual mining.
if you edit one of the dual mine bat there is not mention of zilwallet,so I supposed that spminer 4 does take care only of the VTC part, simply stopping mining when from a pool(different from the VTC one) an epoch 0 will be sent.
so another etash only miner need to be used and probably "linked" by zilswitcher together with a zil pool, tha can be like ezil.me where you double mine eth+zil or like shardpool where you just mine shardpool when epoch 0 comes
so, which ETASH miner has been tested ?, in which ZIL pool?
simply because I tried to finalize a bat file that works with my rigs and I was not successful with zilminer (doesn't have a documented function of use /disable a gpu) that I need having 4/8 gb mixed rigs
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
April 29, 2021, 05:21:13 AM Last edit: November 08, 2021, 01:36:32 PM by mprep |
|
so, which ETASH miner has been tested ?, in which ZIL pool?
To dual mine you use the zilminer and mine zil on a standalone zil mining pool like shardpoo.io. ZilMiner.exe -P zil://ZIL_ADDRESS.WORKER_NAME@eu1-zil.shardpool.io:5000/api --work-timeout=99998 --retry-delay=998 --farm-retries=99998 Then launch spminer#4 with the zil switch. The zil switch will switch off the verthash gpu mining while the zil pow is active
Did you try the intensity option? -i 15, -i 16, -i 17, -i 18.4 ? I don't have your card, so don't know the best launch config for it.
Hey sp_, i tried your miner with one of my igpu, but it won´t connect to pool if i mining to zergpool. On f2pool it sometimes work after 1 or 2 restarts via loop.
spminer #4 should work with internal graphics without restarts. The Zergpool bug has been fixed. [moderator's note: consecutive posts merged]
|
|
|
|
ASCiiDiTY
Jr. Member
Offline
Activity: 40
Merit: 1
|
|
April 29, 2021, 04:01:29 PM |
|
Did you try the intensity option? -i 15, -i 16, -i 17, -i 18.4 ? I don't have your card, so don't know the best launch config for it. No but I will try it soon and report back. What other flag options are there for this miner?
|
Vertcoin PPLNS Pool | 0.69% fee | 0.05 VTC min payout: ACiDPOOL.CO.UK (http://acidpool.co.uk/)
|
|
|
|