CCminer(SP-MOD) Modded GPU kernels.

[sp_]

What other flag options are there for this miner?

--skip-submit-stale if you have high ping, get alot of rejected shares or mine on p2pool.

Please make a static build capable of running on the older linux system.

The linux Linux build is using cuda 11.2. Modern linux. Probobly skipping static build as well. Let's see tomorrow

SP_ HAS TESTED SEVERAL POOLS--

#4 Performed best on Hashalot.net and miningpoolhub.com. Zergpool had alot of rejected shares (~10%) but the VTC payout was good. f2pool.com is best for profitswitching because of PROP payouts

[moderator's note: consecutive posts merged]

[ASCiiDiTY]

What other flag options are there for this miner?

--skip-submit-stale if you have high ping, get alot of rejected shares or mine on p2pool.

I am still using spminer #1. I played with memtweak settings and now am getting no rejected shares: https://ibb.co/HVvsPwz

With these settings the reported hashrate on miningpoolhub is also higher (1060 worker): https://ibb.co/JKX0r80

I tried with intensity but can not get the same hashrates in spminer #4.

Please can I request you make spminer #1 fix 14 with just zil switch added?

[sp_]

Sunday I will test  it with RTX 3070 and let you know

What speed are you getting on the rtx 3070 with the spminer #4?

[skablast]

https://imgur.com/M504SuR


Sorry, I can't stop the eth miner and add /try other if I am not phisically there:
 
I've got trouble, at stock with mining pool hub.. with shares as I can't have one valid on the first 100...


Speed , as you can see, is not that bad even after 2 minutes...
Zergpool is the same.
Haven't registered with hashalot etc yet

ideas ?

I will be back there during the week end

[sp_]

Vertcoin spminer #4 for linux has been released

https://github.com/sp-hash/SPMiner/releases/tag/4

if you make a linux build I will test it

Linux build available ready to test.

Just need linux support man

Done. Go get those coins..

THANKS FOR LINUX SUPPORT--

done

[moderator's note: consecutive posts merged]

[scryptr]

SP_ HAS TESTED SEVERAL POOLS--

#4 Performed best on Hashalot.net and miningpoolhub.com. Zergpool had alot of rejected shares (~10%) but the VTC payout was good. f2pool.com is best for profitswitching because of PROP payouts

THANKS FOR THE REPLY--

I am still was waiting for a Linux version.  My 1060ti and 1060 3GB cards are mining Haven (XHV) just now, about $10 a day's worth.  I tried UbiqHash (UBQ) and it ran for maybe week or so on my 1050ti rig, using PhoenixMiner, with zero rejects.  I finally did the math and was earning less than $1 a day.  Each 1050ti had about 13.5 MH/s, rock steady.

Will test Linux version.  Hope that it will run on older Linux, standalone.  VTC on 1 RX580 rig is a top earner, using TRM.

--scryptr

P.S.  It does not run.  I have CUDA 10 drivers, 440.26, I believe.       --scryptr

[sp_]

P.S.  It does not run.  I have CUDA 10 drivers, 440.26, I believe.       --scryptr

cuda 11.2 you need >= 450.80.02 ++ driver

VTC on 1 RX580 rig is a top earner, using TRM.

Around +50% more profit with zilminer+spminer(with dual mining switch) than TRM standalone on the rx580. but 120watt, not 100...

I've got trouble, at stock with mining pool hub.. with shares as I can't have one valid on the first 100...

Thanks for testing. Do you use any unusual launch config? How much memory do you have in the rig and wich cpu? Did you remember to add virtual memory? 32gb should be enough

[moderator's note: consecutive posts merged]

[skablast]

8Gb of memory, an I3 6100, 64 gb of virtual memory on the SSD for 4 RTX 3070, 1 580  8gb,1 Rx550 4 gb, that I used to "fill the slots"  while two 1660 super are on the road.

I was thinking it was enough.

do I have to try adding memory ?

[scryptr]

P.S.  It does not run.  I have CUDA 10 drivers, 440.26, I believe.       --scryptr

cuda 11.2 you need >= 450.80.02 ++ driver

PLEASE MAKE A CUDA 10 VERSION--

I can't update the drivers without breaking the system.  I've tried.       --scryptr

[pallas]

> ./spminer
./spminer: error while loading shared libraries: libcudart.so.11.0: cannot open shared object file: No such file or directory

> nvidia-smi
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 460.73.01    Driver Version: 460.73.01    CUDA Version: 11.2     |
|-------------------------------+----------------------+----------------------+

standard ubuntu 20.04, with distribution cuda and drivers, so on default paths.

[sp_]

> ./spminer
./spminer: error while loading shared libraries: libcudart.so.11.0: cannot open shared object file: No such file or directory

try:

$ ln -s libcudart.so.11.2.72 lubcudart.so.11.0

do I have to try adding memory ?

I managed to reproduce and fix the bug.

spminer4_fix1.7z

https://github.com/sp-hash/SPMiner/releases/tag/4



[moderator's note: consecutive posts merged]

[pallas]

> ./spminer
./spminer: error while loading shared libraries: libcudart.so.11.0: cannot open shared object file: No such file or directory

try:

$ ln -s libcudart.so.11.2.72 lubcudart.so.11.0

Hmmm no: you should link to so.11 not so.11.0 otherwise as soon as there's a minor cuda update it will stop working.

[sp_]

Okay thanks. If you can't combine them, please add a v1 fix 14 with Zil miner switch if possible, that would be great.

I have included a cuda 10.1 build of #4, can you test it on your p106-090 rig please

spminer4_fix1_cuda10.1.7z

[ASCiiDiTY]

Okay thanks. If you can't combine them, please add a v1 fix 14 with Zil miner switch if possible, that would be great.

I have included a cuda 10.1 build of #4, can you test it on your p106-090 rig please

spminer4_fix1_cuda10.1.7z

Success! Same hashrate as spminer #1, maybe a tiny bit better. Let me test for 24-48 hours and I will report back. I will also test zill switch.

EDIT: zil switch works very well, start time is perfect, but maybe the delay is a little too long at the end of pow window? Not much, but a bit.

[sp_]

PLEASE MAKE A CUDA 10 VERSION--
I can't update the drivers without breaking the system.  I've tried.       --scryptr

Spminer #4 linux cuda 10.1 build has been released.

Should work on ubuntu 20.04 with nvidia driver installed


Driver version must be 418.39 or newer

https://github.com/sp-hash/SPMiner/releases/tag/4

spminer_linux4_10.1.7z

[singlass]

PLEASE MAKE A CUDA 10 VERSION--
I can't update the drivers without breaking the system.  I've tried.       --scryptr

Spminer #4 linux cuda 10.1 build has been released.

Should work on ubuntu 20.04 with nvidia driver installed


Driver version must be 418.39 or newer

https://github.com/sp-hash/SPMiner/releases/tag/4

spminer_linux4_10.1.7z

how do i adjust the intensity for opencl/AMD ?

[scryptr]

PLEASE MAKE A CUDA 10 VERSION--
I can't update the drivers without breaking the system.  I've tried.       --scryptr

Spminer #4 linux cuda 10.1 build has been released.

Should work on ubuntu 20.04 with nvidia driver installed


Driver version must be 418.39 or newer

https://github.com/sp-hash/SPMiner/releases/tag/4

spminer_linux4_10.1.7z

how do i adjust the intensity for opencl/AMD ?

IT DOES NOT RUN--

Pallas mentioned it a few posts back.  The build calls for a library "libcudart.so.10.1" or something.  I definitely have a CUDA 10 driver, I am able to run 1660ti cards.  A less specific call (see Pallas' note) is required.  Or, make a build that needs no library calls.  It may be fatter, I don't care.

--scryptr

[sp_]

how do i adjust the intensity for opencl/AMD ?

Same for cuda and CL, use the -i option comma separated for each device

-i 17  (all devices)
-i 14,15,15,17,18,19   (device 0 -i 14, device 1 -i 15...)

spminer also support comma in the intensity for finetuning

-i 14.1,14.2,14.3,14.4,14.5,14.6

[singlass]

how do i adjust the intensity for opencl/AMD ?

Same for cuda and CL, use the -i option comma separated for each device

-i 17  (all devices)
-i 14,15,15,17,18,19   (device 0 -i 14, device 1 -i 15...)

spminer also support comma in the intensity for finetuning

-i 14.1,14.2,14.3,14.4,14.5,14.6

it works on my NVIDIA rig but on AMD it says "your system does not support CUDA 11.2 API" when i add the -i command,
i even tried without the "--all-cu-devices" command

[sp_]

My 1060ti and 1060 3GB cards are mining Haven (XHV) just now, about $10 a day's worth.  I tried UbiqHash (UBQ) and it ran for maybe week or so on my 1050ti rig, using PhoenixMiner, with zero rejects.  I finally did the math and was earning less than $1 a day.  Each 1050ti had about 13.5 MH/s, rock steady.

Verthash spminer#4 (cuda 10.1 build) gtx 1060 3gb 380khash
put 0.38 into the calculator
https://minerstat.com/coin/VTC
$1.41 /DAY

zilminer 21MHASH (1 minute of mining every 100minutes)
put 21 MHASH into the calculator
https://minerstat.com/coin/ZIL
$0.3724 DAY

So you get $1.7824 a day a card (gtx 1060 3gb) with the spminer #4 with zil switch enabled and zilminer.

My 1060ti and 1060 3GB cards are mining Haven (XHV) just now, about $10 a day's worth.

With 12 cards $21,4 / DAY with the spminer4+zil


Perhaps worth the upgrade to ubuntu 20.04 or windows?

it works on my NVIDIA rig but on AMD it says "your system does not support CUDA 11.2 API" when i add the -i command,
i even tried without the "--all-cu-devices" command

I guess there are some problems on AMD cards with the linux build. Will look into it.

[moderator's note: consecutive posts merged]