[ANN] Kryptohash | Brand new PoW algo | 320bit hash | ed25519 | PID algo for dif

[wr104]

What is the max supply ?!

This is the current block reward schema:

Blocks: 0 to 99 -> A fixed subsidy of 50 KHCs.
Blocks: 100 to 999 -> A fixed subsidy of 50 KHCs plus a random subsidy of 0 to 399 KHCs.
Blocks: 1,000 to 9,999 -> A fixed subsidy of 50 KHCs plus a random subsidy of 0 to 199 KHCs.
Blocks: 10,000 to 99,999 -> A fixed subsidy of 50 KHCs plus a random subsidy of 0 to 99 KHCs.
Blocks: 100,000 to 124,999 -> A fixed subsidy of 50 KHCs plus a random subsidy of 0 to 49 KHCs.
Blocks: 125,000 to 249,999 -> A fixed subsidy of 50 KHCs.
Blocks: 250,000+ -> A fixed subsidy of 25 KHCs.

As you can see, there isn't a max. After block 250,000, the monetary mass will be controlled by the network through a secure voting system that we are developing for the Wallet.

[wr104]

For those of you who are concerned about the Monetary mass of KHC moving forward, consider this comparison.

Code:

1 BTC = 100,000,000 satoshis
1 KHC =     100,000 kryptoha-toshis

Current BTC reward per block today (March 2015) is: 25 BTC or 2,500,000,000 satoshis

KHC reward per block after block 250,000 will be: 25 KHC or 2,500,000 kryptoha-toshis.


Now, which coin is more inflationary?  BTC or KHC?

[xtrembash]

What is the max supply ?!

This is the current block reward schema:

Blocks: 0 to 99 -> A fixed subsidy of 50 KHCs.
Blocks: 100 to 999 -> A fixed subsidy of 50 KHCs plus a random subsidy of 0 to 399 KHCs.
Blocks: 1,000 to 9,999 -> A fixed subsidy of 50 KHCs plus a random subsidy of 0 to 199 KHCs.
Blocks: 10,000 to 99,999 -> A fixed subsidy of 50 KHCs plus a random subsidy of 0 to 99 KHCs.
Blocks: 100,000 to 124,999 -> A fixed subsidy of 50 KHCs plus a random subsidy of 0 to 49 KHCs.
Blocks: 125,000 to 249,999 -> A fixed subsidy of 50 KHCs.
Blocks: 250,000+ -> A fixed subsidy of 25 KHCs.

As you can see, there isn't a max. After block 250,000, the monetary mass will be controlled by the network through a secure voting system that we are developing for Wallet.

For those of you who are concerned about the Monetary mass of KHC moving forward, consider this comparison.

Code:

1 BTC = 100,000,000 satoshis
1 KHC =     100,000 kryptoha-toshis

Current BTC reward per block today (March 2015) is: 25 BTC or 2,500,000,000 satoshis

KHC reward per block after block 250,000 will be: 25 KHC or 2,500,000 kryptoha-toshis.


Now, which coin is more inflationary?  BTC or KHC?

thank you for the answers

[wr104]

I created a Twitter account for the Kryptohash Coin

https://twitter.com/kryptohash

[cvaky]

Please put list of exchanges for voting KHC on OP.

Please go to BTER exchange website and vote for KHC.

https://bter.com/voting

[wand_reader]

Please put list of exchanges for voting KHC on OP.

Please go to BTER exchange website and vote for KHC.

https://bter.com/voting

Bter is a good exchange. I need to recover my account and buy some BTR before voting.

[wr104]

Please put list of exchanges for voting KHC on OP.

Please go to BTER exchange website and vote for KHC.

https://bter.com/voting

Done.

I also added the voting link for c-cex Exchange and the twitter link of Bittrex.  Bittrex wants followers to vote for new coins using Twitter.

[wand_reader]

I am a gpu miner who has mined hundreds of coins over the past one and half years.

I have strong feel that KHC is really something -- we have a dev who obviously have a good talent to do what a coder need to do ,and plus he understands the basic  finance pricipal.

I give KHC a 4 stars ****. The missed star is that the community is not large enough.

[wand_reader]

I'm getting 330Kh/s on my 290x

What does your config look like? I do not see even close to that.

With AMD HD 7xxx and later GPUs, running the latest Omega drivers, you have to use an option called --cl-opt-disable.  For some reason these latest AMD GPUs with GCN architecture work better when you disable OpenCL optimizations.  On the other hand, this option doesn't have a positive effect on older AMD GPUs and nVidia.

Example for my 290x:

cgminer --kryptohash --cl-opt-disable -o http://127.0.0.1:38912 -u {RPC_username} -p {RPC_password} --shaders 2816 --shaders-mul 8

Very important: Don't forget to delete the kshake320v2%YourGPUname%.bin file inside the cgminer directory after you add/remove the --cl-opt-disable parameter.  It is the only way to force cgminer to recompile the OpenCL kernel and include/remove the cl-optimization flag.

Urrr?  I'm only getting 280 Kh/s out of my R9-290 and I've got it cranked up to 1175!  Same too simple to fail config, obviously with shaders at 2560.  But... duh... let's go through those cl libs.

Yeah, runs kinda hot eh!  Shader is a cozy 45C but I've still got this 10-15C discrepancy between that and the VRM1 block.

Edit:  Ah bugger.  Right, throttling due to power.  I was cranking it for a low power algo earlier and had upped the voltages.  Interesting cards, the 290's, I'm used to pushing it 'till it moves, but with these you've gotta finesse.

Boo-Yah!  326 Kh/s @ 1125/1250.  Shader 45C & VRM's still needing a heat-sink (59C).  Now for the 7950....

Check it... notice something about the mount here?  Cooler Master Seidon series...



They are exactly matched to ATI card heat-sink mount holes.  It's the easiest mod around, and I'm sure there are a lot of used units out there.  I can't get my 7950 over 70 C, over-volted and shoving hard!

If you're on Linux - use this:

Code:

AMD_OCL_BUILD_OPTIONS_APPEND=-cl-opt-disable ./cgminer ...

You may use -O0, or -cl-opt-disable, it doesn't matter. On Windows, set the environment variable with setx - and do NOT run CGMiner from the same shell! Start a new prompt after setting it, or it won't take effect.

Dear Mr.Wolf,I don't think you can make a big improvement from wr104's gpu miner,bcz he has already made it good enough.

[antonio8]

I'm getting 330Kh/s on my 290x

What does your config look like? I do not see even close to that.

With AMD HD 7xxx and later GPUs, running the latest Omega drivers, you have to use an option called --cl-opt-disable.  For some reason these latest AMD GPUs with GCN architecture work better when you disable OpenCL optimizations.  On the other hand, this option doesn't have a positive effect on older AMD GPUs and nVidia.

Example for my 290x:

cgminer --kryptohash --cl-opt-disable -o http://127.0.0.1:38912 -u {RPC_username} -p {RPC_password} --shaders 2816 --shaders-mul 8

Very important: Don't forget to delete the kshake320v2%YourGPUname%.bin file inside the cgminer directory after you add/remove the --cl-opt-disable parameter.  It is the only way to force cgminer to recompile the OpenCL kernel and include/remove the cl-optimization flag.

Urrr?  I'm only getting 280 Kh/s out of my R9-290 and I've got it cranked up to 1175!  Same too simple to fail config, obviously with shaders at 2560.  But... duh... let's go through those cl libs.

Yeah, runs kinda hot eh!  Shader is a cozy 45C but I've still got this 10-15C discrepancy between that and the VRM1 block.

Edit:  Ah bugger.  Right, throttling due to power.  I was cranking it for a low power algo earlier and had upped the voltages.  Interesting cards, the 290's, I'm used to pushing it 'till it moves, but with these you've gotta finesse.

Boo-Yah!  326 Kh/s @ 1125/1250.  Shader 45C & VRM's still needing a heat-sink (59C).  Now for the 7950....

Check it... notice something about the mount here?  Cooler Master Seidon series...



They are exactly matched to ATI card heat-sink mount holes.  It's the easiest mod around, and I'm sure there are a lot of used units out there.  I can't get my 7950 over 70 C, over-volted and shoving hard!

If you're on Linux - use this:

Code:

AMD_OCL_BUILD_OPTIONS_APPEND=-cl-opt-disable ./cgminer ...

You may use -O0, or -cl-opt-disable, it doesn't matter. On Windows, set the environment variable with setx - and do NOT run CGMiner from the same shell! Start a new prompt after setting it, or it won't take effect.

Dear Mr.Wolf,I don't think you can make a big improvement from wr104's gpu miner,bcz he has already made it good enough.

Ohhh, boy.

[wr104]

I am a gpu miner who has mined hundreds of coins over the past one and half years.

I have strong feel that KHC is really something -- we have a dev who obviously have a good talent to do what a coder need to do ,and plus he understands the basic  finance pricipal.

I give KHC a 4 stars ****. The missed star is that the community is not large enough.

Thanks. We worked very hard getting the all the key features into the coin at launch. Also, we added enough flexibility to the blockchain to allow for feature enhancements in the future.

Now that the coin has demonstrated it has what it needs to be a top alt coin, we need to grow the community and take Kryptohash to the Moon.  You can help by promoting the coin in this forum and voting to add KHC to new Exchanges.  

[tacee]

I am a gpu miner who has mined hundreds of coins over the past one and half years.

I have strong feel that KHC is really something -- we have a dev who obviously have a good talent to do what a coder need to do ,and plus he understands the basic  finance pricipal.

I give KHC a 4 stars ****. The missed star is that the community is not large enough.

Thanks. We worked very hard getting the all the key features into the coin at launch. Also, we added enough flexibility to the blockchain to allow for feature enhancements in the future.

Now that the coin has demonstrated it has what it needs to be a top alt coin, we need to grow the community and take Kryptohash to the Moon.  You can help by promoting the coin in this forum and voting to add KHC to new Exchanges.  

Have you tried to contact bittrex ? Bittrex doesn't need vote.

[wr104]

Have you tried to contact bittrex ? Bittrex doesn't need vote.

Yes, I have contacted Bittrex a couple of times.  They want the community to vote for new coins using Twitter. 

If you have Twitter account, go ahead and tweet @bittrexexchange saying they should add KHC to their exchange.

[antonio8]

So I tried to start mining again with v3.7.7 but it closes at the start of it.

Last 2 lines of log are:
[2015-03-31 07:15:46] Probing for an alive pool
[2015-03-31 07:15:46] Popping work to stage thread

[wr104]

So I tried to start mining again with v3.7.7 but it closes at the start of it.

Last 2 lines of log are:
[2015-03-31 07:15:46] Probing for an alive pool
[2015-03-31 07:15:46] Popping work to stage thread

Can you post the full command line you are executing?

[antonio8]

So I tried to start mining again with v3.7.7 but it closes at the start of it.

Last 2 lines of log are:
[2015-03-31 07:15:46] Probing for an alive pool
[2015-03-31 07:15:46] Popping work to stage thread

Can you post the full command line you are executing?

cgminer.exe --kryptohash --kernel kshake320v2 --cl-opt-disable -d 0 -I 32 --worksize 64 -o stratum+tcp://mine4.khc.nonce-pool.com:3390 -u USERNAME -p x --shaders 2048 --shaders-mul 8 --debug  2>log.txt


Sorry just getting home.

[scamkiller]

I created a Twitter account for the Kryptohash Coin

https://twitter.com/kryptohash

already followed.
could you please put your twitter account on the op?

[wr104]

So I tried to start mining again with v3.7.7 but it closes at the start of it.

Last 2 lines of log are:
[2015-03-31 07:15:46] Probing for an alive pool
[2015-03-31 07:15:46] Popping work to stage thread

Can you post the full command line you are executing?

cgminer.exe --kryptohash --kernel kshake320v2 --cl-opt-disable -d 0 -I 32 --worksize 64 -o stratum+tcp://mine4.khc.nonce-pool.com:3390 -u USERNAME -p x --shaders 2048 --shaders-mul 8 --debug  2>log.txt


Sorry just getting home.

Don't used the --debug.  It can cause the annoying libpdcurses.dll crash

Also, keep in mind that the "--cl-opt-disable" switch only helps on newer AMD GPUs with GCN architecture.  Don't used it with your nVidia GPUs

For your 280x, try this
   cgminer --kryptohash --cl-opt-disable -d 0 -I 32 --worksize 64 -o stratum+tcp://mine4.khc.nonce-pool.com:3390 -u USERNAME -p x --shaders 2048 --shaders-mul 8

If it gets too hot, reduce the Intensity to 28 or less.

[wr104]

I created a Twitter account for the Kryptohash Coin

https://twitter.com/kryptohash

already followed.
could you please put your twitter account on the op?

Done. Follow me at https://twitter.com/Wolf_Rayet_104

[antonio8]

So I tried to start mining again with v3.7.7 but it closes at the start of it.

Last 2 lines of log are:
[2015-03-31 07:15:46] Probing for an alive pool
[2015-03-31 07:15:46] Popping work to stage thread

Can you post the full command line you are executing?

cgminer.exe --kryptohash --kernel kshake320v2 --cl-opt-disable -d 0 -I 32 --worksize 64 -o stratum+tcp://mine4.khc.nonce-pool.com:3390 -u USERNAME -p x --shaders 2048 --shaders-mul 8 --debug  2>log.txt


Sorry just getting home.

Don't used the --debug.  It can cause the annoying libpdcurses.dll crash

Also, keep in mind that the "--cl-opt-disable" switch only helps on newer AMD GPUs with GCN architecture.  Don't used it with your nVidia GPUs

For your 280x, try this
   cgminer --kryptohash --cl-opt-disable -d 0 -I 32 --worksize 64 -o stratum+tcp://mine4.khc.nonce-pool.com:3390 -u USERNAME -p x --shaders 2048 --shaders-mul 8

If it gets too hot, reduce the Intensity to 28 or less.

Thanks.

Got me going again. I will keep an eye on the temps.