EUROPECOIN [ERC] 🌟 FINANCECLOUD 🌟 CRYPTOCURRENY & FINANCE API + SMARTHUB 🌟

[n00dles]

A bit question - while supernova is offline want to keep mining in solo, wallet is work, network is alive - perferct... but internal wallet miner a "bit slow"))) Is the any way to use external miner to use with wallet or solo mining in general.. thx.

In general, there is at least one such way - you could install a pool software on your PC (or on a Linux VPS), then direct your miners (GPU or rented) to that pool. I did that way couple of years ago for few obscure coins - just to play a little. It is not that hard - if you are not going to allow external users mine on your pool, you don't have to maintain database and do all the accounting. You just need a pure pool software to use stratum. However it definitely requires some Linus skills. I used this project - https://github.com/slush0/stratum.git - back then...

I know this is not a tutorial, but just a hint, in case if you are determined enough to explore the idea

your advice very very helpful and amazing. I even didn't think about such solution. Will try "to play" with this stuff yesterday.

Thx a lot!!!!

[szenekonzept]

A bit question - while supernova is offline want to keep mining in solo, wallet is work, network is alive - perferct... but internal wallet miner a "bit slow"))) Is the any way to use external miner to use with wallet or solo mining in general.. thx.

In general, there is at least one such way - you could install a pool software on your PC (or on a Linux VPS), then direct your miners (GPU or rented) to that pool. I did that way couple of years ago for few obscure coins - just to play a little. It is not that hard - if you are not going to allow external users mine on your pool, you don't have to maintain database and do all the accounting. You just need a pure pool software to use stratum. However it definitely requires some Linus skills. I used this project - https://github.com/slush0/stratum.git - back then...

I know this is not a tutorial, but just a hint, in case if you are determined enough to explore the idea

your advice very very helpful and amazing. I even didn't think about such solution. Will try "to play" with this stuff yesterday.

Thx a lot!!!!

We are in touch with suprnova andf we are working on the issue together

have fun
Matthias

[szenekonzept]

Some status update


A few weeks ago i promised to create a first testversion of the Financecloud Portal Application
to play around with. So let me share some status with that: So for now we have the Interface and Appstore,
together with a single sign on for all apps and a Versioning/upgrade management for the System and Apps.
Also  done is a first run setup, that secures all applications




Now i will start adding meaningfull apps to the system and then release everything, for everybody ti play with
and for developers, to create apps.

Technical details the interface ist based on "homer" with some more automation and addiusional customizations
deployed on a single node Kubernetes cluster. By default, once the first run setup done (see below),
all applications will be secured by proper default values and a Single Sign-On solution. F
or now, it use the external auth ingressfunctionality coupled to Organizr.

Software used:

    k3s: A lightweight distribtution of Kubernetes
   Ansible: to orchestrate cluster installation, generate and deploy the k8s ressources
   kube-prometheus for the monitoring stack, based on Prometheus and grafana
   Organizr to protect applications and provide Single Sign-On
   Ingress-nginx to serve cluster ingress in https
   Cert-Manager to generate Let's Encrypt certificate
   Postgresql as main database for apps

have fun
Matthias :-)


.

[RataXes]

Any update regarding Revolut?

[liepies]

 
What is going on with ERC

Fist the suprnova pool is off and now Crex24 is blocking deposits/withdrawal.
 

This is bad for ERC

Please look into this.

Is ERC dead??

[DesktopCommando]

Does anyone have the explorer details - cant find the CMC or 1st page one to work

[drays]

Does anyone have the explorer details - cant find the CMC or 1st page one to work

The current official ERC explorer is here: http://erc-explorer.communitycoins.org/?
A bit basic, but better than nothing.

[Piotor]

I can see the project is slowly dying. Nobody speaks. The wallet is not syncing. Will anything change?
 In my opinion, in order to launch a project quickly and on a grand scale and be successful, you need a larger team.
"You can't do it yourself."

[szenekonzept]

O.K. after 5weeks

...  of crisis management i managed to fix the blockchain glitch and the blocks are flying again.





EVERYBODY WHO LIKES US TO SUCCEED OR EVEN SURVIVE can do his part by running a wallet, keep it online and
to solo-mine some coins. The next five days i will monitor the chain and if it has proven to be staple, i can notify exchanges
to re enable trading.

Then i can finally return to focus the real stuff to work on

have fun
Matthias 

.

[szenekonzept]

What is going on with ERC

Fist the suprnova pool is off and now Crex24 is blocking deposits/withdrawal.
 

This is bad for ERC

Please look into this.

Is ERC dead??

The pool stop, the blockchain glitch and crex24 are all connected, communication with the owners has been kept up all the time and they will return
services as soon we are save to go.

has been a little bit "bumpy" this year
have fun
Matthias


.

[szenekonzept]

I can see the project is slowly dying. Nobody speaks. The wallet is not syncing. Will anything change?
 In my opinion, in order to launch a project quickly and on a grand scale and be successful, you need a larger team.
"You can't do it yourself."

I share your opinion about the team issue.
As soon as the chain problem is solved (right now it quite looks like we did it)
I will start a campaign, to get people engaged.

But  to keep you expectations realistic:
We are a no funds take-over of an old, formerly dead coin
As a result people do not tend to mass-join into projects with no salary to expect. (not even some coins from any premine)

BTW you are welcome to engage (seriously).
Maybe you have some ideas, possibilities and/or just the motivation
to shape our/your and Europecoins & Financeclouds future.


have fun
Matthias

.

[minerja]

Hi,
Just wondering, what is the block chain issue.
Is that why i am stuck @ block 497609 from Fri Jul 9 19:50:42 2021 with no connections?

[szenekonzept]

Hi,
Just wondering, what is the block chain issue.
Is that why i am stuck @ block 497609 from Fri Jul 9 19:50:42 2021 with no connections?

Yes, this has been the issue, but its fixed now and your wallet should be able to sync now.

Take care, you have a Version of at least >=3.0.2 and if needed add some nodes to your config to kickstart:

addnode=95.217.78.169:8881
addnode=80.208.166.130:8881
addnode=85.214.32.221:8881
addnode=95.223.71.243:8881

have fun
Matthias


.

[minerja]

Hi,
Just wondering, what is the block chain issue.
Is that why i am stuck @ block 497609 from Fri Jul 9 19:50:42 2021 with no connections?

Yes, this has been the issue, but its fixed now and your wallet should be able to sync now.

Take care, you have a Version of at least >=3.0.2 and if needed add some nodes to your config to kickstart:

addnode=167.114.224.79
addnode=167.114.224.82
addnode=194.135.92.209
addnode=104.255.33.55
addnode=194.135.93.49
addnode=23.227.190.77
addnode=2.123.19.238

have fun
Matthias


.

Hi
Just downloaded wallet v3.0.2.0-g4f9cc23
Started from scratch, with only these addnodes....
5 years 5 weeks behind, no block source available
Would be so much better with the old explorer which at least showed live connected nodes and wallet version

EDIT

Just got one connection
144.76.238.2:8881 which it says is wallet /EuropeCoin:3.0.1/ so according to what you wrote above that is the wrong wallet to be connected to....

Please help

[szenekonzept]

Hi,
Just wondering, what is the block chain issue.
Is that why i am stuck @ block 497609 from Fri Jul 9 19:50:42 2021 with no connections?

Yes, this has been the issue, but its fixed now and your wallet should be able to sync now.

Take care, you have a Version of at least >=3.0.2 and if needed add some nodes to your config to kickstart:

addnode=95.217.78.169:8881
addnode=80.208.166.130:8881
addnode=85.214.32.221:8881
addnode=95.223.71.243:8881

have fun
Matthias


.

Hi
Just downloaded wallet v3.0.2.0-g4f9cc23
Started from scratch, with only these addnodes....
5 years 5 weeks behind, no block source available
Would be so much better with the old explorer which at least showed live connected nodes and wallet version

EDIT

Just got one connection
144.76.238.2:8881 which it says is wallet /EuropeCoin:3.0.1/ so according to what you wrote above that is the wrong wallet to be connected to....

Please help

Just fetched the best and freshest nodes from my running Wallet and updated my post.
These are online, fast and up to date. If these fail, please check your router and firewall.
If you have any problems remaining,  feel free to head back to me for more help.

here are they again, just to make sure:

addnode=95.217.78.169:8881
addnode=80.208.166.130:8881
addnode=85.214.32.221:8881
addnode=95.223.71.243:8881

have fun
Matthias

.

[minerja]

Hi

Still no joy.

Thing is, everything has worked fine for last 2-3 years right up til 5 weeks ago.

So i have 1 wallet (my daily mining wallet) with about 1000 coins. When i use hte nodes you publish, and do a full rescan, the wallet grabs one peer, and it rescans right up to block 497609, Fri Jul 9 19:50:42 2021 and then drops the peer, and says "no block source available"

The 2nd wallet, i started completely from scratch as i said above...that one started, got to block 480, Sun Jul 10 22:55:04 2016 and then disconnects, also saying no block source available....

What do you need from me to fix this?
my .conf?

Do you want to send me the link to the correct windows wallet, maybe my .exe has got corrupted?

If you can talk me thru compiling for LinuxMint 21, i will happily try a Linux version too, to see if that sync.... ( i am a total linux noob, but got the wallet working on Ubuntu / Lm 18ish last year)

 

[gregofdoom.]

Hi

Still no joy.

Thing is, everything has worked fine for last 2-3 years right up til 5 weeks ago.

So i have 1 wallet (my daily mining wallet) with about 1000 coins. When i use hte nodes you publish, and do a full rescan, the wallet grabs one peer, and it rescans right up to block 497609, Fri Jul 9 19:50:42 2021 and then drops the peer, and says "no block source available"

The 2nd wallet, i started completely from scratch as i said above...that one started, got to block 480, Sun Jul 10 22:55:04 2016 and then disconnects, also saying no block source available....

What do you need from me to fix this?
my .conf?

Do you want to send me the link to the correct windows wallet, maybe my .exe has got corrupted?

If you can talk me thru compiling for LinuxMint 21, i will happily try a Linux version too, to see if that sync.... ( i am a total linux noob, but got the wallet working on Ubuntu / Lm 18ish last year)

 

Get on Telegram. I will try to help

[minerja]

Hi

Still no joy.

Thing is, everything has worked fine for last 2-3 years right up til 5 weeks ago.

So i have 1 wallet (my daily mining wallet) with about 1000 coins. When i use hte nodes you publish, and do a full rescan, the wallet grabs one peer, and it rescans right up to block 497609, Fri Jul 9 19:50:42 2021 and then drops the peer, and says "no block source available"

The 2nd wallet, i started completely from scratch as i said above...that one started, got to block 480, Sun Jul 10 22:55:04 2016 and then disconnects, also saying no block source available....

What do you need from me to fix this?
my .conf?

Do you want to send me the link to the correct windows wallet, maybe my .exe has got corrupted?

If you can talk me thru compiling for LinuxMint 21, i will happily try a Linux version too, to see if that sync.... ( i am a total linux noob, but got the wallet working on Ubuntu / Lm 18ish last year)

 

Get on Telegram. I will try to help

Hi,
No access to telegram.
Discord? something else?

[gregofdoom.]

Hi

Still no joy.

Thing is, everything has worked fine for last 2-3 years right up til 5 weeks ago.

So i have 1 wallet (my daily mining wallet) with about 1000 coins. When i use hte nodes you publish, and do a full rescan, the wallet grabs one peer, and it rescans right up to block 497609, Fri Jul 9 19:50:42 2021 and then drops the peer, and says "no block source available"

The 2nd wallet, i started completely from scratch as i said above...that one started, got to block 480, Sun Jul 10 22:55:04 2016 and then disconnects, also saying no block source available....

What do you need from me to fix this?
my .conf?

Do you want to send me the link to the correct windows wallet, maybe my .exe has got corrupted?

If you can talk me thru compiling for LinuxMint 21, i will happily try a Linux version too, to see if that sync.... ( i am a total linux noob, but got the wallet working on Ubuntu / Lm 18ish last year)

 

Get on Telegram. I will try to help

Hi,
No access to telegram.
Discord? something else?

Discord OK.
My name is  gregofdoom#6020

[szenekonzept]

Hi
total linux noob, but got the wallet working on Ubuntu / Lm 18ish last year)

 

Get on Telegram. I will try to help

Hi,
No access to telegram.
Discord? something else?

Discord OK.
My name is  gregofdoom#6020

Tank you Greg for engaging and taking over this case,  thats very helpful atm.
@minerja  go with this guy, he is very experienced

have fun
Matthias

.