Old thread of Stakecoin

[bitcoinreviews]

I'm starting to get a bit worried as well. Does anyone know the guy that has all of our money? Is he still sleeping . . ?

On a lighter note my Stake wallet just mined it's first block 

[gr8n8]

I'm on the Mintpal list. When I follow the instructions - "In that console type dumpprivkey <address>" - I get the message: Invalid CinniCoin address (code -5)

What am I doing wrong?

the instructions were slightly wrong see my post or 2 ago if you need

do this:

importprivkey privkey (replace privkey with your privkey that you got from your cinni wallet)

[bitcoinreviews]

Alright, I'm just going to go to bed and dream of waking up to see my coin steady staking in my StakeCoin wallet.

[AikaPool]

http://aikapool.com - worked! Sorry...

1) Updated MySQL version for stabler work of Stratum!
2) Added RAID1 for databases of wallets. It will create normal conditions for work of the MySQL database.
3) Opening of the main page with the list of pools accelerated.
4) Opening of a window with overall balance from all pools is accelerated.


...Welcome!

[Papcio77]

I have done according to instructions. But I did not get STK. My address list. I waited one day and nothing.

[crypto4jan]

To convert Cinni into STK:

If you have Cinni in your wallet:
Step 1. ) Open your wallet and sync, you can use a bootstrap.dat to make you sync faster.
Step 2. ) Send  all your Cinni to 1 of your addresses (you have to do this step please)
Step 3. ) When all your Cinni is in one address only, send your Cinni to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6 (this will burn them)
Step 4. ) In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console'
Step 5. ) In that console type dumpprivkey <address> (replace <address> with the address you sent from)
Step 6. ) Record that private key somewhere to use in the next step.
Step 7. ) Download Stakecoin wallet
Step 8. ) In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console'
Step 9. ) In that console type importprivkey <address> (replace <address> with the Cinni address you sent from)
Step 10. ) Wait maximum 1 day to recieve your Stakecoins.

You have until Stakecoins PoW ends to do this proccess.
If any Stakecoins are left over at the end of PoW then they will be burned to JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6

If you were on the list of Cinni on Mintpal, go to your Cinni wallet, In your Cinni wallet press 'Help' then press 'Debug window' then press 'Console', In that console type dumpprivkey <address> (replace <address> with your address from that list), Download Stakecoin wallet, In your Stakecoin wallet press 'Help' then press 'Debug window' then press 'Console', In that console type importprivkey <address> (replace <address> with your address from that list).

Step 1 brought me in problems.
I send all the coins to 1 adrress and now they are not confirmed and cant send them to enywhere



What can I do?

[bitcreditscc]

Yes it is FUD. One should never spend more than 6 hours a day continuously staring at blue light (screens).

As you all know i have my own coin to develop for. I only stepped in here when i saw a launch that was stalling. Your developer has confirmed receiving address so i am sending. Will post proof immediately afterwards.

I have not sold a single coin, they do not belong to me why would i do that?

[EmpoEX]

We have suspended trading, as developer's request.

Please keep us posted, so we act accordingly.

EmpoEX

[bitcoinreviews]

Yes it is FUD. One should never spend more than 6 hours a day continuously staring at blue light (screens).

As you all know i have my own coin to develop for. I only stepped in here when i saw a launch that was stalling. Your developer has confirmed receiving address so i am sending. Will post proof immediately afterwards.

I have not sold a single coin, they do not belong to me why would i do that?

Great to hear! I have removed my FUD.
Best,

[micro123]

when i import the privatekey forum cinni to stakcoin wallet
it give : Error adding key to wallet (code -4)

[shadowbummer]

when i import the privatekey forum cinni to stakcoin wallet
it give : Error adding key to wallet (code -4)

You need to import the privatekey (not the address) that was dumped from the cinni wallet. 

[micro123]

that 's what I did . I even tried both .

[CinniCoin]

that 's what I did . I even tried both .

importprivkey <privkey> name
replace <privkey> with your private key
and replace name with the name you want your address to be called

[micro123]

that 's what I did . I even tried both .

importprivkey <privkey> name
replace <privkey> with your private key
and replace name with the name you want your address to be called

I do exactly as you say it, but keep getting the error 5 message

[CinniCoin]

that 's what I did . I even tried both .

importprivkey <privkey> name
replace <privkey> with your private key
and replace name with the name you want your address to be called

I do exactly as you say it, but keep getting the error 5 message

It should work. Try restarting your wallet and tell me if you see your address in the recieve coins tab.
Also just to make sure, your Cinni private key that you are importing in the Stakecoin wallet starts with a "S" right?

[Papcio77]

http://snag.gy/KoPTG.jpg    Adress import OK. STK=0   Waiting one day and still did not get stakecoin. Pleas Cinnidev Help me.

[crypto4jan]

What can I do?

Ok I started CINNI with a backup wallet and send in two batches to the burn address

Status: 82 confirmations, broadcast through 4 node(s)
Date: 13-1-2015 12:16
To: burn address CINNI JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
Debit: -1106.95 CINNI
Transaction fee: -0.04 CINNI
Net amount: -1106.99 CINNI
Transaction ID: dd956a77785b3fe1e91431ae6d9c8068919dcd8049b9ad4d1ef578959ce76f6d


Status: 108 confirmations, broadcast through 5 node(s)
Date: 13-1-2015 12:11
To: burn address CINNI JXxxxxxxxxxxxxxxxxxxxxxxxxxxyXxqk6
Debit: -0.377316 CINNI
Transaction fee: -0.01 CINNI
Net amount: -0.387316 CINNI
Transaction ID: 3e04af02e02dbf4216dbe8106b5c052ff53d3158f15c8da16565ee8bcfa3be23

[micro123]

that 's what I did . I even tried both .

importprivkey <privkey> name
replace <privkey> with your private key
and replace name with the name you want your address to be called

I do exactly as you say it, but keep getting the error 5 message

It should work. Try restarting your wallet and tell me if you see your address in the recieve coins tab.
Also just to make sure, your Cinni private key that you are importing in the Stakecoin wallet starts with a "S" right?

same problem.
Yes the privatekey starts with a S.
I don't see the adres in the recieve coins tab (stakecoin wallet).

[kubuminer]

guys send hash on our pool. thanks. wait miners on our pool.

[CinniCoin]

that 's what I did . I even tried both .

importprivkey <privkey> name
replace <privkey> with your private key
and replace name with the name you want your address to be called

I do exactly as you say it, but keep getting the error 5 message

It should work. Try restarting your wallet and tell me if you see your address in the recieve coins tab.
Also just to make sure, your Cinni private key that you are importing in the Stakecoin wallet starts with a "S" right?

same problem.
Yes the privatekey starts with a S.
I don't see the adres in the recieve coins tab (stakecoin wallet).

Try importing this Cinni private key in the Stakecoin wallet and tell me if you can do it successfully.
"importprivkey SLaQzhroVQePwa3hKskMqeu9wDsZNkykmsVw1jG1N11eCaMwBYyy test"
paste that in the Stakecoin console without the qoutes and you should recieve a blank message. if you recieve a blank message that means it imported successfully. then restart and you should see that address in your wallet.
Do it with a new wallet.dat though since this private key is public
if this works for you, then go to your Cinni wallet and export the private key again and make new wallet.dat and import it like you did that time.
just replace the test private key with your own, and replace test with a different name.