S5 review

[Syke]

Would this work?

http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2104719_-1

It's 9 volts with 16.7 amps output but only rated at 150 watts.

Interesting. Although you'd probably need 4 of them per S5.

[Syke]

Sorry to report that half my SP20 has kicked the bucket. Cycling the power and upgrading the firmware has not helped.

Code:

2.6.1
Uptime:153 | FPGA ver:100 | BIST in 60
-----BOARD-0-----
PSU[UNKNOWN]: 0->(127w/127w)[127 127 127] (->127w[127 127 127]) (lim=155) 0c 252GH cooling:0/0x0
-----BOARD-1-----
PSU[UNKNOWN]: 0->(140w/140w)[140 140 140] (->140w[140 140 140]) (lim=155) 0c 277GH cooling:0/0x0
-----BOARD-2-----
PSU[UNKNOWN]: 0->(5w/5w)[5 5 5] (->5w[5 5 5]) (lim=155) 0c 0GH cooling:0/0x0
-----BOARD-3-----
PSU[UNKNOWN]: 0->(5w/5w)[5 5 5] (->5w[5 5 5]) (lim=155) 0c 0GH cooling:0/0x0
LOOP[0] ON TO:0 (w:6)
 0: DC2DC/1/:[vlt1:625 vlt2:629(DCl:794 Tl:794 Ul:629) 54W  87A  50c] ASIC:[ 85c (125c) 710hz(BL: 710)    3 (E:192) F:0 L:0]
 1: DC2DC/1/:[vlt1:626 vlt2:629(DCl:794 Tl:794 Ul:629) 46W  73A  56c] ASIC:[ 85c (125c) 600hz(BL: 600)    3 (E:193) F:0 L:0]
LOOP[1] ON TO:0 (w:14)
 2: DC2DC/1/:[vlt1:626 vlt2:629(DCl:794 Tl:794 Ul:629) 57W  91A  62c] ASIC:[ 85c (125c) 740hz(BL: 740)    3 (E:193) F:0 L:0]
 3: DC2DC/1/:[vlt1:626 vlt2:629(DCl:794 Tl:794 Ul:629) 53W  85A  64c] ASIC:[ 85c (125c) 700hz(BL: 700)   11 (E:193) F:0 L:0]
LOOP[2] OFF TO:0 (test serial failed or something)
4: disabled (i2c BAD, btw!)
5: disabled (i2c good, no OC)
LOOP[3] OFF TO:0 (test serial failed or something)
6: disabled (i2c BAD, btw!)
7: disabled (i2c BAD, btw!)

[Guy Corem]

Sorry to report that half my SP20 has kicked the bucket. Cycling the power and upgrading the firmware has not helped.

Code:

2.6.1
Uptime:153 | FPGA ver:100 | BIST in 60
-----BOARD-0-----
PSU[UNKNOWN]: 0->(127w/127w)[127 127 127] (->127w[127 127 127]) (lim=155) 0c 252GH cooling:0/0x0
-----BOARD-1-----
PSU[UNKNOWN]: 0->(140w/140w)[140 140 140] (->140w[140 140 140]) (lim=155) 0c 277GH cooling:0/0x0
-----BOARD-2-----
PSU[UNKNOWN]: 0->(5w/5w)[5 5 5] (->5w[5 5 5]) (lim=155) 0c 0GH cooling:0/0x0
-----BOARD-3-----
PSU[UNKNOWN]: 0->(5w/5w)[5 5 5] (->5w[5 5 5]) (lim=155) 0c 0GH cooling:0/0x0
LOOP[0] ON TO:0 (w:6)
 0: DC2DC/1/:[vlt1:625 vlt2:629(DCl:794 Tl:794 Ul:629) 54W  87A  50c] ASIC:[ 85c (125c) 710hz(BL: 710)    3 (E:192) F:0 L:0]
 1: DC2DC/1/:[vlt1:626 vlt2:629(DCl:794 Tl:794 Ul:629) 46W  73A  56c] ASIC:[ 85c (125c) 600hz(BL: 600)    3 (E:193) F:0 L:0]
LOOP[1] ON TO:0 (w:14)
 2: DC2DC/1/:[vlt1:626 vlt2:629(DCl:794 Tl:794 Ul:629) 57W  91A  62c] ASIC:[ 85c (125c) 740hz(BL: 740)    3 (E:193) F:0 L:0]
 3: DC2DC/1/:[vlt1:626 vlt2:629(DCl:794 Tl:794 Ul:629) 53W  85A  64c] ASIC:[ 85c (125c) 700hz(BL: 700)   11 (E:193) F:0 L:0]
LOOP[2] OFF TO:0 (test serial failed or something)
4: disabled (i2c BAD, btw!)
5: disabled (i2c good, no OC)
LOOP[3] OFF TO:0 (test serial failed or something)
6: disabled (i2c BAD, btw!)
7: disabled (i2c BAD, btw!)

Was it modded ?
Please contact remo@ for diagnostic.

[Syke]

Was it modded ?
Please contact remo@ for diagnostic.

All stock. I'll email.