WoodCollector the saga continues?....

[redsn0w]

How much do those machines cost to purchase and are there places that will print designs off for you? I'm just wondering how WoodCutter even has access to one as they probably don't come cheap (though maybe he has one at his work or something?).

I think the real problem here is that he has advertised his work as hand carved but most probably it was only a laser.

[hilariousandco]

Yes, I'm not disputing that and it's clear to anyone who isn't Tecshare and WC's alts that is what happened, but I'm just wondering how WC has access to what I'm assuming is an expensive piece of kit.

[redsn0w]

Smoothie how  much do you want for your "hand carved" piece ? 14k dollars  ?

[hilariousandco]

He's already sold it apparently.

[bitspill]

Smoothie how  much do you want for your "hand carved" piece ? 14k dollars  ?

It's already been sold as was stated previously. He traded a few kialara physical coins for it, 2x2014 and 1x2015 I believe

[redsn0w]

Yes, I'm not disputing that and it's clear to anyone who isn't Tecshare and WC's alts that is what happened, but I'm just wondering how WC has access to what I'm assuming is an expensive piece of kit.

One of his friends , it is cheap maybe he paid 100-150 $ and commissioned the engraved "lasering" and after put some oil on it and voila. Work finished !

[hilariousandco]

Smoothie how  much do you want for your "hand carved" piece ? 14k dollars  ?

It's already been sold as was stated previously. He traded a few kialara physical coins for it, 2x2014 and 1x2015 I believe

https://bitcointalk.org/index.php?topic=938742.0

One of his friends , it is cheap maybe he paid 100-150 $ and commissioned the engraved "lasering" and after put some oil on it and voila. Work finished !

I doubt those machines are cheap.

[redsn0w]

He's already sold it apparently.

Smoothie how  much do you want for your "hand carved" piece ? 14k dollars  ?

It's already been sold as was stated previously. He traded a few kialara physical coins for it, 2x2014 and 1x2015 I believe

Oh damn  , maybe the next time he will make another "hand carved" piece   this time write something like that : this piece worth 14'000 dollars Lol).

[redsn0w]

Smoothie how  much do you want for your "hand carved" piece ? 14k dollars  ?

It's already been sold as was stated previously. He traded a few kialara physical coins for it, 2x2014 and 1x2015 I believe

https://bitcointalk.org/index.php?topic=938742.0

One of his friends , it is cheap maybe he paid 100-150 $ and commissioned the engraved "lasering" and after put some oil on it and voila. Work finished !

I doubt those machines are cheap.

I meant he paid 100-150 $ only for the laser process not for the purchase of the machine.


Ps: thanks for the link.

[smoothie]

How much do those machines cost to purchase and are there places that will print designs off for you? I'm just wondering how WoodCutter even has access to one as they probably don't come cheap (though maybe he has one at his work or something?).

A laser like mine costs $15k.

Range of lasers would be $10k to $50k depending on what you want to be able to laser. Higher end ones are for laser engraving metal.

I am sure there are places that you could have custom designs laser engraved into wood.

The type of detail and similar nature of what I did in 20 minutes (40 from start to finish of creating an image to laser setting up the equipment and burning the design into the wood) to what WC did with his "physical bitcoin" using that same design template.

[smoothie]

Smoothie how  much do you want for your "hand carved" piece ? 14k dollars  ?

It sold within 15 min of me posting it on the forum.

[ukcrypto]

How much do those machines cost to purchase and are there places that will print designs off for you? I'm just wondering how WoodCutter even has access to one as they probably don't come cheap (though maybe he has one at his work or something?).

A laser like mine costs $15k.

Range of lasers would be $10k to $50k depending on what you want to be able to laser. Higher end ones are for laser engraving metal.

I am sure there are places that you could have custom designs laser engraved into wood.

The type of detail and similar nature of what I did in 20 minutes (40 from start to finish of creating an image to laser setting up the equipment and burning the design into the wood) to what WC did with his "physical bitcoin" using that same design template.

Can you proove you own this laser? How do we know you are not paying someone to do this? How can you prove it? Can you take a video in the workshop that the cutting was done in, walk around outside to show us its not a shop?

[Ludi]

How much do those machines cost to purchase and are there places that will print designs off for you? I'm just wondering how WoodCutter even has access to one as they probably don't come cheap (though maybe he has one at his work or something?).

A laser like mine costs $15k.

Range of lasers would be $10k to $50k depending on what you want to be able to laser. Higher end ones are for laser engraving metal.

I am sure there are places that you could have custom designs laser engraved into wood.

The type of detail and similar nature of what I did in 20 minutes (40 from start to finish of creating an image to laser setting up the equipment and burning the design into the wood) to what WC did with his "physical bitcoin" using that same design template.

Can you proove you own this laser? How do we know you are not paying someone to do this? How can you prove it? Can you take a video in the workshop that the cutting was done in, walk around outside to show us its not a shop?

Cmon now why are you being silly? You're just flogging a dead horse. Smoothie doesnt need to prove anything that is down to woodcollecter so I suggest you talk to him about providing new videos.

[smoothie]

How much do those machines cost to purchase and are there places that will print designs off for you? I'm just wondering how WoodCutter even has access to one as they probably don't come cheap (though maybe he has one at his work or something?).

A laser like mine costs $15k.

Range of lasers would be $10k to $50k depending on what you want to be able to laser. Higher end ones are for laser engraving metal.

I am sure there are places that you could have custom designs laser engraved into wood.

The type of detail and similar nature of what I did in 20 minutes (40 from start to finish of creating an image to laser setting up the equipment and burning the design into the wood) to what WC did with his "physical bitcoin" using that same design template.

Can you proove you own this laser? How do we know you are not paying someone to do this? How can you prove it? Can you take a video in the workshop that the cutting was done in, walk around outside to show us its not a shop?

Lol Oh let the butthurt flow through you more 

[Fakecoin]

Still selling info on Woodcollector using lasers.  20BTC. Smoothie aka Woodcollector  

[redsn0w]

Smoothie how  much do you want for your "hand carved" piece ? 14k dollars  ?

It sold within 15 min of me posting it on the forum.

Woow Amazing ! Great work , this piece worth really more than 10k dollars  .

[bitspill]

Smoothie aka Woodcollector  

This entire situation was a ruse to disrdiscredit a fake person and kick start smoothie's new laser art business

/endtinfoilhat

[fishb0ne]

Hey guys so I made this "hand carved" piece from "original" artwork.

No power tools involved, just your "hands" and "hand tools".

Took about 20 minutes to finish this masterpiece.

Wow, that video was legendary. For everyone that was wondering why we made a big deal out of the distinction between laser cut and hand carved, watching your video ... makes one wonder if something like that is really work 14 grand.

[hilariousandco]

Hey guys so I made this "hand carved" piece from "original" artwork.

No power tools involved, just your "hands" and "hand tools".

Took about 20 minutes to finish this masterpiece.

Wow, that video was legendary. For everyone that was wondering why we made a big deal out of the distinction between laser cut and hand carved, watching your video ... makes one wonder if something like that is really work 14 grand.

Of course it isn't worth 14k. But then again I don't think this is worth 140 mill:

[cshelswell]

Yeah but pollock never used a machine to make something that was claimed to be made by hand. Pollock also could paint less abstract peices. He was actually talented