mores (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 16, 2012, 02:36:59 AM |
|
Yesterday I had an AMD/ATI radeon 5870 working just fine. ( never overclocked )
Today the computer will not complete POST. I have tried the card in 2 different systems: - Award BIOS postcode stops at 26 - AMI BIOS postcode stops at 2A
The computer boots up with other video cards, just not the 5870.
Is there anything I can try to get this card working again ?
|
|
|
|
squall1066
Copper Member
Legendary
Offline
Activity: 2310
Merit: 1032
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 16, 2012, 01:00:45 PM |
|
both codes point to ram!, strange but true.
asuming ami bios is pheonix then 2A - Initializes different devices through DIM. are they paired or are you clocking the memory? If another card works in this system then i'm stumped.
|
|
|
|
exotime
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2012, 05:48:27 PM |
|
Have you been overclocking? What were the temperatures like when mining? It looks like you've damaged one of the memory chips - in which case, there's probably not much you can do.
|
|
|
|
mores (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2012, 11:41:34 PM |
|
The card is working again. I think this card has to "warm up" before it will complete the POST.
On a cold boot it stopped at 2A. Seeing that it was broken I just kept rebooting it and noticed the post code got a little farther than 2A. I waited some more to heat up, rebooted and it finally booted into the OS. ( Either that or the position of one of the PCI express power connectors was under a little pressure. )
I saw posts online of people baking their gpu in the oven to fix it. Before I went that far I was going to try a few other things. Now it is back to mining.
|
|
|
|
mores (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2012, 01:11:10 AM |
|
My GPU has been running at 85 degrees. I wanted to mine at a safe level without any overclocking. So I followed the executive summary of: Single pool, dedicated miner: cgminer -o http://pool:port -u username -p password -I 9 That results in gpu running at 85 degrees. The readme said all the defaults should be safe values. I have now added --auto-fan so that the temp comes down to 75 degrees. What is a safe temperature to mine at ?
|
|
|
|
John (John K.)
Global Troll-buster and
Legendary
Offline
Activity: 1288
Merit: 1227
Away on an extended break
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2012, 01:46:00 AM |
|
The lower the better. I usually run mine at 75, but that's just me.
|
|
|
|
Portnoy
Legendary
Offline
Activity: 2030
Merit: 1000
My money; Our Bitcoin.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2012, 03:54:47 PM |
|
The lower the better. I usually run mine at 75, but that's just me.
Me too.
|
|
|
|
Sekioh
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2012, 04:06:53 PM |
|
I'm pissed, I just lost a card yesterday too.
Noticed I checked on my mining and had no shares submitted in like 20hrs, and go to restart the machine and couldn't remote, it was hard locked so I restarted it and it had like 5 rapid beeps and the GPU fan started at 100% throttle. Powered fully down and turned off PSU, turned all on, and it starts to windows (no monitor so software-wise) and I can log in remotely since VNC uses software rendering, but as soon as I try to start mining fan jumps up and computer hard locks. :|
It was running 80-85 under normal conditions of full mining, I had fans set with a 85 ramp up as it approached up to 100% so that it kept that as a ceiling.
I find it really interesting that it's letting it POST from a cold boot until put under load. A warm restart is the only time it doesn't post after an error locked it up.
|
|
|
|
grue
Legendary
Offline
Activity: 2058
Merit: 1434
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2012, 04:31:18 PM |
|
I'm pissed, I just lost a card yesterday too.
Noticed I checked on my mining and had no shares submitted in like 20hrs, and go to restart the machine and couldn't remote, it was hard locked so I restarted it and it had like 5 rapid beeps and the GPU fan started at 100% throttle. Powered fully down and turned off PSU, turned all on, and it starts to windows (no monitor so software-wise) and I can log in remotely since VNC uses software rendering, but as soon as I try to start mining fan jumps up and computer hard locks. :|
It was running 80-85 under normal conditions of full mining, I had fans set with a 85 ramp up as it approached up to 100% so that it kept that as a ceiling.
I find it really interesting that it's letting it POST from a cold boot until put under load. A warm restart is the only time it doesn't post after an error locked it up.
well there's your problem
|
|
|
|
mores (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2012, 04:36:19 PM |
|
Perhaps the default settings in the miners should have a lower temperature to run the hardware safely. ( 75 sounds like the recommended temp )
Then only allow the overclockers to run it hotter.
How long had you been running the card from 80-85 ?
|
|
|
|
Portnoy
Legendary
Offline
Activity: 2030
Merit: 1000
My money; Our Bitcoin.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2012, 07:36:15 PM |
|
Perhaps the default settings in the miners should have a lower temperature to run the hardware safely. ( 75 sounds like the recommended temp )
Then only allow the overclockers to run it hotter.
You can overclock a 5870 and still keep it at 75 or lower. I use MSI Afterburner.
|
|
|
|
mores (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2012, 09:43:17 PM |
|
From the cgminer docs: EXECUTIVE SUMMARY ON USAGE: Single pool, dedicated miner: cgminer -o http://pool:port -u username -p password -I 9 That maintains an 85 degree gpu. All I am saying is that when that exact command is issued it should keep the gpu at 75 degrees.
|
|
|
|
mores (OP)
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2012, 10:05:46 PM |
|
The card worked for about 24 hours and now it stopped again.
I see people are selling GPUs as parts or repair.... how much is a 5870 worth when sold as parts/repair ?
|
|
|
|
on9isrock
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 70
Merit: 15
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2012, 07:30:49 AM |
|
you can go to electronics shops/services to change the gpu part
|
my address :18TTx6qBr2LTiyRu6SuLDX1SFwDCQyeJRC
|
|
|
|
|