Voya (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 23, 2015, 06:04:34 PM |
|
Promotion coin maybe poloniex giveaway?
We are looking at doing a promotion giveaway shortly to gain more interest, unsure if poloniex would do it as we aren't listed there?
|
|
|
|
Clminer
|
|
February 23, 2015, 07:10:50 PM |
|
can somebody please tell me what to do , i have a R270x and i cant get the AMD miner to run, also tried this: sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13 he keeps saying "libcurl.ddl" is missing?
|
|
|
|
Raskal
Member
Offline
Activity: 67
Merit: 10
A Fools Paradise Is A Wise Man's Hell
|
|
February 23, 2015, 08:38:22 PM |
|
can somebody please tell me what to do , i have a R270x and i cant get the AMD miner to run, also tried this: sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13 he keeps saying "libcurl.ddl" is missing? If you have a previous sgminer5 just copy the files you need from that directory and paste them into the new sgminer directory. Also you may wanna drop the no-submit-stale I get a shit load of stales with that but without it they are almost all accepted.
|
|
|
|
AliMan
|
|
February 23, 2015, 10:45:03 PM |
|
no its not.
just create a .bat file any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0. And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s How did you OC the memory?
|
|
|
|
Vann
|
|
February 24, 2015, 12:26:19 AM |
|
can somebody please tell me what to do , i have a R270x and i cant get the AMD miner to run, also tried this: sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13 he keeps saying "libcurl.ddl" is missing? If you have a previous sgminer5 just copy the files you need from that directory and paste them into the new sgminer directory. Also you may wanna drop the no-submit-stale I get a shit load of stales with that but without it they are almost all accepted. That probably means your share expiry time is set too low. If you are mining on a pool try --expiry 20.
|
|
|
|
Vann
|
|
February 24, 2015, 12:27:37 AM |
|
no its not.
just create a .bat file any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0. And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s How did you OC the memory? Try --gpu-memclock 1500
|
|
|
|
AliMan
|
|
February 24, 2015, 12:40:41 AM |
|
no its not.
just create a .bat file any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0. And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s How did you OC the memory? Try --gpu-memclock 1500 Just tried that, but it still runs at 3000Mhz on afterburner.
|
|
|
|
Vann
|
|
February 24, 2015, 12:50:59 AM |
|
no its not.
just create a .bat file any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0. And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s How did you OC the memory? Try --gpu-memclock 1500 Just tried that, but it still runs at 3000Mhz on afterburner. On some systems i.e. like my Dell, you have to enable overclocking in the Bios before you can adjust the settings.
|
|
|
|
Voya (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 24, 2015, 02:57:30 AM |
|
We don't have any AMD equipment to test out the new miner but hopefully it is all working for you guys!
We are nearly ready to get our own block explorer up and going just finalising some extra features and tweaking a few things.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
February 24, 2015, 03:18:10 AM |
|
Have updated the main post to include the AMD Miner thanks to djm34! We would love to send djm34 and Wolf0 some VOYA for your efforts so PM us and we will send you some through as support for your work! Also you to earlz for PLUCK sure, you can send some here: LNcbpwChYS1rHAoTmVReLEEjiTKgYPFYyf However, I personnally think you rushed into making that coin, you should have waited You basically repeat the same mistake which were made over and over last year... It won't profit to your coin and will basically undermine EarlZ effort into making something new... Also the only reason which pushed you to make that coin is the huge sell price at launch, hence greed, but since you promised to send some voya, I will not complain I hope since you doubled the premine, you will also double as well what you will send me for the miners
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Voya (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 24, 2015, 03:25:07 AM |
|
Have updated the main post to include the AMD Miner thanks to djm34! We would love to send djm34 and Wolf0 some VOYA for your efforts so PM us and we will send you some through as support for your work! Also you to earlz for PLUCK sure, you can send some here: LNcbpwChYS1rHAoTmVReLEEjiTKgYPFYyf However, I personnally think you rushed into making that coin, you have waited You basically repeat the same mistake which were made over and over last year... It won't profit to your coin and will basically undermine EarlZ effort into making something new... Will send some through, our intentions were not to undermine Earlz in anyway at all. We are greatful of the hard work and effort he put into it, and makes a perfect base for creating a project. It also makes mining more profitable therefore the network is secured by ensuring there will be miners, as the network is essentially the backbone of the project. We appologize to Earlz if he thinks we have undermined or insulted you in anyway possible, we really do love your work.
|
|
|
|
DES_MX
Member
Offline
Activity: 216
Merit: 13
|
|
February 24, 2015, 08:21:19 AM |
|
no its not.
just create a .bat file any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0. And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s How did you OC the memory? Try --gpu-memclock 1500 Just tried that, but it still runs at 3000Mhz on afterburner. install nvinspector go to overclocking select P2 state select unlock max set 4000mhz click apply default msi afterburner only applies OC to p3 state, not P2, in which the miner is running on nvidia.
|
|
|
|
beks1
Newbie
Offline
Activity: 50
Merit: 0
|
|
February 24, 2015, 08:58:32 AM |
|
Net Hashrate: 2,843.14 KH/s
|
|
|
|
|
Kevin77
Legendary
Offline
Activity: 1652
Merit: 1057
|
|
February 24, 2015, 02:23:23 PM |
|
I'll try to mine this. Is it worth it? Does this have a chance for better exchange and stable/rising price? Also, doesn't Earlz mind for snatching his algo?
|
|
|
|
kondiomir
Legendary
Offline
Activity: 1568
Merit: 1000
Twitter @Acimirov
|
|
February 24, 2015, 05:34:28 PM |
|
We need better exchange. At least Ccex.
|
|
|
|
AliMan
|
|
February 25, 2015, 12:14:17 AM |
|
no its not.
just create a .bat file any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0. And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s How did you OC the memory? Try --gpu-memclock 1500 Just tried that, but it still runs at 3000Mhz on afterburner. install nvinspector go to overclocking select P2 state select unlock max set 4000mhz click apply default msi afterburner only applies OC to p3 state, not P2, in which the miner is running on nvidia. I'm getting a max of 3500Mhz and 3600Mhz on both of my cards, the slider on the nvinspector ends there, only in P3 it goes till 4000Mhz.
|
|
|
|
Voya (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 25, 2015, 03:22:18 AM |
|
We need better exchange. At least Ccex.
We have messaged the bigger and more reputable exchanges, waiting to hear back from them. Edit: Bittrex has replied and said they will look over us soon so fingers crossed for you guys, as we know a larger reputable exchange is what you are all after!
|
|
|
|
sucyresky
Newbie
Offline
Activity: 238
Merit: 0
|
|
February 25, 2015, 03:41:44 AM |
|
What website this coin?
|
|
|
|
DES_MX
Member
Offline
Activity: 216
Merit: 13
|
|
February 25, 2015, 07:03:54 AM |
|
no its not.
just create a .bat file any type in:
sgminer.exe --no-submit-stale --kernel pluck -o stratum+tcp://stratum.coin-miners.info:3636 -u YOURUSER -p password --gpu-platform 1 -w 4 -I 13
if fail change -I from 13 to 12
Mine didn't run at --gpu-platform 1, it ran at --gpu-platform 0. And in the beginning it starts at 11.37kh/s, but stabilizes at 9.8 kh/s How did you OC the memory? Try --gpu-memclock 1500 Just tried that, but it still runs at 3000Mhz on afterburner. install nvinspector go to overclocking select P2 state select unlock max set 4000mhz click apply default msi afterburner only applies OC to p3 state, not P2, in which the miner is running on nvidia. I'm getting a max of 3500Mhz and 3600Mhz on both of my cards, the slider on the nvinspector ends there, only in P3 it goes till 4000Mhz. first OC mem in MSI Afterburner to max (4000mhz for me) then apply then go to NVinspector P2 state. Click "unlock max" the slider will go up to 4000mhz as well Click apply
|
|
|
|
|