waffles99
|
|
April 14, 2015, 12:31:58 PM |
|
is darksend working fine?
not yet under development Dude you don't know shit. stop answering questions with hot air. sheep need to DO YOUR OWN RESEARCH click on transactions. EXAMINE THE BLOCK EXPLORER. learn a little damn code.
|
|
|
|
snafflecoin
|
|
April 14, 2015, 12:33:24 PM |
|
top wallets accumulating coins something must be coming
|
|
|
|
borris123
|
|
April 14, 2015, 12:43:18 PM |
|
still get error
not capable masternode: Could not connect to *****:9998
that is for masternode 3. The 1st 2 configs work and they have not got the ports changed like you said only the rpc port number.
Do you have the latest wallet? The zipped file is named cravex64mn7.7z and you can download it from the OP Here is my config and it is working with three MN Read the following if you want to setup more then one master node using the same computer with one ip address. You can change the port and the rpcport and setup more if you want. You will need one copy of the data dir and the crave-qt.exe for each master node that you wan to run. Here is an example of running three master nodes. Folder that hold the block chain and .conf files C:\SubFolders\CraveMasterNode1 C:\SubFolders\CraveMasterNode2 C:\SubFolders\CraveMasterNode3 Folders that contain the crave-qt.exe and the .bat files to launch the masternode c:\MyFiles\CraveMN1\ c:\MyFiles\CraveMN2\ c:\MyFiles\CraveMN3\ Then in each of the above folders you would put in the following .bat files to launch the master nodes. StartMasterNode1.bat crave-qt -datadir=C:\SubFolders\CraveMasterNode1 StartMasterNode2.bat crave-qt -datadir=C:\SubFolders\CraveMasterNode2 StartMasterNode3.bat crave-qt -datadir=C:\SubFolders\CraveMasterNode3 Also in each of the data dir you need to put in a crave.conf file like the following. Notice with each config they use a different port and a different rpcport for each crave.conf. It is best to have staking=0 so it does not stake. crave.conf for use with Crave Master Node 1 maxconnections=100 rpcuser=YourRPCUser rpcpassword=YourRPCPassword rpcport=30105 port=9999 gen=0 server=1 daemon=1 staking=0 reservebalance=500 masternodeaddr=YouIPAddress:9999 masternode=1 masternodeprivkey=YourMasterKey rpcallowip=127.0.0.1
crave.conf for use with Crave Master Node 2 maxconnections=100 rpcuser=YourRPCUser rpcpassword=YourRPCPassword rpcport=30106 port=9998 gen=0 server=1 daemon=1 staking=0 reservebalance=500 masternodeaddr=YouIPAddress:9998 masternode=1 masternodeprivkey=YourMasterKey rpcallowip=127.0.0.1
crave.conf for use with Crave Master Node 3 maxconnections=100 rpcuser=YourRPCUser rpcpassword=YourRPCPassword rpcport=30107 port=9997 gen=0 server=1 daemon=1 staking=0 reservebalance=500 masternodeaddr=YouIPAddress:9997 masternode=1 masternodeprivkey=YourMasterKey rpcallowip=127.0.0.1
Baffled once again. 2 work and the only thing I changed is the RPC port. I have tried changing all the ports so they different but still it won't work...what could be up??
|
|
|
|
Jengo
|
|
April 14, 2015, 12:43:45 PM |
|
Just made this real quick, use it infront of a brighter background or you'll see some aliasing. Really nice Liberty or DieThanks! If anybody needs to use it with a black background then just tell me and I'll make one without alpha channel.
|
|
|
|
hepilord
|
|
April 14, 2015, 12:45:16 PM |
|
This fu..... mn not work i tryied on 2 machines with windows 7 64bit and not work
|
|
|
|
DonQuijote
Legendary
Offline
Activity: 1551
Merit: 1002
♠ ♥ ♣ ♦ < ♛♚&#
|
|
April 14, 2015, 12:45:51 PM |
|
is darksend working fine?
not yet under development Ok thanks
|
THE INGENIOUS GENTLEMAN DON QUIXOTE OF LA MANCHA
|
|
|
rocoro
Legendary
Offline
Activity: 938
Merit: 1000
|
|
April 14, 2015, 12:48:21 PM |
|
Baffled once again. 2 work and the only thing I changed is the RPC port. I have tried changing all the ports so they different but still it won't work...what could be up??
Did you add more nodes? add some of these: addnode=104.131.107.33 addnode=104.131.60.120 addnode=104.131.81.102 addnode=104.131.88.156 addnode=104.156.227.249 addnode=104.156.250.144 addnode=104.156.251.190 addnode=104.207.128.99 addnode=104.207.129.243 addnode=104.207.133.191 addnode=104.207.133.26 addnode=104.207.135.34 addnode=104.207.149.135 addnode=104.236.205.29 addnode=104.236.206.97 addnode=104.236.234.246 addnode=104.238.132.89 addnode=104.238.133.21 addnode=104.238.133.23 addnode=104.238.134.169 addnode=104.238.144.146 addnode=104.238.174.160 addnode=107.191.46.130 addnode=107.191.51.51 addnode=108.61.168.215 addnode=108.61.190.29 addnode=108.61.216.187 addnode=128.199.242.28 addnode=162.243.13.251 addnode=174.63.158.15 addnode=176.118.48.189 addnode=178.62.36.12 addnode=185.92.221.156 addnode=185.92.221.84 addnode=188.226.210.40 addnode=188.40.96.10 addnode=188.40.96.57 addnode=209.222.30.82 addnode=212.8.195.245 addnode=217.92.212.5 addnode=37.59.24.15 addnode=37.59.27.14 addnode=45.55.132.193 addnode=45.55.140.160 addnode=45.55.146.241 addnode=45.55.161.38 addnode=45.55.165.127 addnode=45.55.172.84 addnode=45.55.180.78 addnode=45.63.124.171 addnode=45.63.15.190 addnode=45.63.15.91 addnode=45.63.49.162 addnode=45.63.83.206 addnode=46.101.21.231 addnode=5.45.179.149 addnode=52.0.109.78 addnode=52.5.146.102 addnode=52.5.147.199 addnode=52.5.148.28 addnode=52.5.175.64 addnode=70.190.27.57 addnode=76.120.69.105 addnode=76.22.119.198 addnode=80.153.190.197 addnode=85.25.214.175 addnode=85.25.223.7 addnode=104.207.135.83
|
|
|
|
EmilioMann
Legendary
Offline
Activity: 2184
Merit: 1028
#mitandopelomundo
|
|
April 14, 2015, 12:55:12 PM Last edit: April 14, 2015, 01:07:16 PM by EmilioMann |
|
Same for me I opened the port 9999 and 9998 for two masternodes, and i can't manage to make the 2nd with 9998 work, always got "not masternode capable'....i spent hours on it...gonna ask to a friend to help now I followed everything that was explained The 1st one is perfect. If somebody has some clues... This fu..... mn not work i tryied on 2 machines with windows 7 64bit and not work
sologap and Kimowa have a masternode setup service for noobs & lazy boys https://bitcointalk.org/index.php?topic=1016963
|
|
|
|
Jengo
|
|
April 14, 2015, 12:58:21 PM |
|
is darksend working fine?
not yet under development Ok thanks It works already, read waffles post.
|
|
|
|
waffles99
|
|
April 14, 2015, 01:02:24 PM |
|
Also don't forget you can create these now, will look into src to see if they're useable at this time however
|
|
|
|
rocoro
Legendary
Offline
Activity: 938
Merit: 1000
|
|
April 14, 2015, 01:06:24 PM |
|
dev posts a message and its get lost. you refresh the page and another page is already created. never seen a thread had so many pages of bullshit
You can see all the Dev/ICM posts right here easily: Latest posts of: IndustrialCoinMagic https://bitcointalk.org/index.php?action=profile;u=482660;sa=showPosts
|
|
|
|
zzzman20
|
|
April 14, 2015, 01:08:43 PM |
|
You guys, please stop filling up the forum with posts about how you can't get your masternodes working. The directions on http://www.cravecoin.info/ work just fine, I had 0 issues. It was incredibly easy in fact. If you still can't get it to work, just use Sologap and Kimowa's service ( https://bitcointalk.org/index.php?topic=1016963) and stop filling up pages and pages of the thread with this stuff.
|
|
|
|
rocoro
Legendary
Offline
Activity: 938
Merit: 1000
|
|
April 14, 2015, 01:13:19 PM |
|
There are links to guides in my signature, please follow & read all you can before posting issues. Or do as others say, use sologap's or kimowa's service.
|
|
|
|
EmilioMann
Legendary
Offline
Activity: 2184
Merit: 1028
#mitandopelomundo
|
|
April 14, 2015, 01:38:56 PM |
|
is darksend working fine?
not yet under development Ok thanks It works already, read waffles post. wow man, that's great
|
|
|
|
Piston Honda
Legendary
Offline
Activity: 2702
Merit: 1064
Juicin' crypto
|
|
April 14, 2015, 01:48:43 PM |
|
I wish the pumpers and dumpers would move on with their trading bots,its so fucking annoying
lol right, without them this coin would be nothing to begin with!
|
$ADK ~ watch & learn...
|
|
|
borris123
|
|
April 14, 2015, 01:56:10 PM |
|
still get error
not capable masternode: Could not connect to *****:9998
that is for masternode 3. The 1st 2 configs work and they have not got the ports changed like you said only the rpc port number.
Do you have the latest wallet? The zipped file is named cravex64mn7.7z and you can download it from the OP Here is my config and it is working with three MN Read the following if you want to setup more then one master node using the same computer with one ip address. You can change the port and the rpcport and setup more if you want. You will need one copy of the data dir and the crave-qt.exe for each master node that you wan to run. Here is an example of running three master nodes. Folder that hold the block chain and .conf files C:\SubFolders\CraveMasterNode1 C:\SubFolders\CraveMasterNode2 C:\SubFolders\CraveMasterNode3 Folders that contain the crave-qt.exe and the .bat files to launch the masternode c:\MyFiles\CraveMN1\ c:\MyFiles\CraveMN2\ c:\MyFiles\CraveMN3\ Then in each of the above folders you would put in the following .bat files to launch the master nodes. StartMasterNode1.bat crave-qt -datadir=C:\SubFolders\CraveMasterNode1 StartMasterNode2.bat crave-qt -datadir=C:\SubFolders\CraveMasterNode2 StartMasterNode3.bat crave-qt -datadir=C:\SubFolders\CraveMasterNode3 Also in each of the data dir you need to put in a crave.conf file like the following. Notice with each config they use a different port and a different rpcport for each crave.conf. It is best to have staking=0 so it does not stake. crave.conf for use with Crave Master Node 1 maxconnections=100 rpcuser=YourRPCUser rpcpassword=YourRPCPassword rpcport=30105 port=9999 gen=0 server=1 daemon=1 staking=0 reservebalance=500 masternodeaddr=YouIPAddress:9999 masternode=1 masternodeprivkey=YourMasterKey rpcallowip=127.0.0.1
crave.conf for use with Crave Master Node 2 maxconnections=100 rpcuser=YourRPCUser rpcpassword=YourRPCPassword rpcport=30106 port=9998 gen=0 server=1 daemon=1 staking=0 reservebalance=500 masternodeaddr=YouIPAddress:9998 masternode=1 masternodeprivkey=YourMasterKey rpcallowip=127.0.0.1
crave.conf for use with Crave Master Node 3 maxconnections=100 rpcuser=YourRPCUser rpcpassword=YourRPCPassword rpcport=30107 port=9997 gen=0 server=1 daemon=1 staking=0 reservebalance=500 masternodeaddr=YouIPAddress:9997 masternode=1 masternodeprivkey=YourMasterKey rpcallowip=127.0.0.1
Baffled once again. 2 work and the only thing I changed is the RPC port. I have tried changing all the ports so they different but still it won't work...what could be up?? Right this is wrong advice but thanks anyway. I have fixed it!. YouIPAddress:9997 should always be 9999 and so should port 9999 all you change is the rpc port. Also add listen=0 and it works!
|
|
|
|
waffles99
|
|
April 14, 2015, 02:02:53 PM |
|
Also We've got community spread out would love to help provided theres time and users that know a thing or two...
CRAVETALK.ORG
CRAVECOIN.SLACK.COM
|
|
|
|
stackoverflow
|
|
April 14, 2015, 02:09:14 PM |
|
I have a few questions if the dev cares to enlighten me:
1- What is the purpose of those adrenaline nodes since they are not performing any coin mixing, just taking 2/3 of the PoS reward from stakers.
2- What anonimity/stealth features does this coin have since darksend is not working, nor is sendtostealthaddress.
3- Why use the abandoned lfnet irc network for peer discovery as it has proven to be an insecure/centralized solution.
Thanks!
this coin is under very fast construction Thanks for your answer about darksend, looks still in development but really promising.
|
|
|
|
goblynn
|
|
April 14, 2015, 02:15:08 PM Last edit: April 14, 2015, 02:36:06 PM by goblynn |
|
darksend is functional..just at the moment from debug command only..but it does work
EDIT: ha i cant say whether its working..but i thought ICM said it was working from command..my bad
|
|
|
|
EmilioMann
Legendary
Offline
Activity: 2184
Merit: 1028
#mitandopelomundo
|
|
April 14, 2015, 02:16:26 PM |
|
I have a few questions if the dev cares to enlighten me:
1- What is the purpose of those adrenaline nodes since they are not performing any coin mixing, just taking 2/3 of the PoS reward from stakers.
2- What anonimity/stealth features does this coin have since darksend is not working, nor is sendtostealthaddress.
3- Why use the abandoned lfnet irc network for peer discovery as it has proven to be an insecure/centralized solution.
Thanks!
this coin is under very fast construction Thanks for your answer about darksend, looks still in development but really promising. Nope, i was wrong its already working is darksend working fine?
not yet under development Ok thanks It works already, read waffles post. wow man, that's great
|
|
|
|
|