I do the math and it seems @1.9% I would need to get more hash then this upgrade gives for it to be profitable.
|
|
|
I recall someone has built some updated custom firmware for the S7.
I just got 35 S7s and am looking at making them as efficient as possible, this means down clocks and other fun stuff, but I recall there was a custom firmware that did undervolting and gave very percise controls...
Anyone have and idea of where to get it? I googled around and only found some weird German threads about Momotorro.
|
|
|
Currently another crypto user, owes me just short of 1million dollars in btc. I am looking for an individual or group that would be able to help me collect by any means necessary, in return I'd share 50% of all funds recovered.
Please PM me if interested.
|
|
|
I have a chance at free power, I can offer you $450 each, or .05 BTC as of right now (this BTC price may fluctuate based on current market value)
|
|
|
Getting back into buying Rigs but Bitmain has moved to only selling use BCC? Anyone have a site that sells rigs or BCC at a reasonable price?
Are there any other reliable companies at this time?
|
|
|
Does anyone know why the system doesn't boot if I plus pcie riser into main x16 slot on motherboard? BTW - I'm using P5Q PRO board: https://www.asus.com/Motherboards/P5Q_PRO/Whenever I use the main x16 pcie slot (blue) the system won't boot. Anyone knows how can I fix this ? Time to talk to your MFG.
|
|
|
Windows 10 v1703 8 RX 580 Gaming-X 8GB (Hynix) Asus Prime Z270 P Claymore 9.8
In june with my rig i got 240 MH/s to 242 MH/s, i change nothing and now, 3 month later the MH/s drop 230 MH/s, i tried aug 23 blockchain driver, the result, i got 248 MH/s, but unfortunately i met issue with stabilty not good. On this topic I read this "It should be higher. Try increasing the -ethi to 8. My eight card mixed RX 570/570 4GB/8GB rig is getting 28.5 to almost 30 MH/s dual mining UBQ."
What is this setting? -ethi to 8
Try -ethi 16
|
|
|
@claymore - Still have the issue even in 10. that If an instance of has more than 3 AMD cards I crash my Win 10 (I am running 7Nvidia 1070s and 5 AMD 580s (2 4mb 3 8mb)
What kind of logsdo we need to get?
I've changed Drivers.
I've reinstalled Windows.
I've rolled back Drivers and gone as far back to 9.4.
And ideas would be amazing I'd like to get allmy cards working again.
|
|
|
How do you unlock AMD overclocking on hybrid rig? I have 6 gtx and 2 RX Furys, I can't touch anything on the Fury cards.
You need to make one of your Furys a main card. Main slot + plug monitor. I didnt have to. try MSi After burner 4.4 beta 16
|
|
|
Okay all m y cards are hynix so I can OC them a bit? My screen for timing looks nothing like his.
Seems wrong version of PBE, you need to find one which display the timings properly... did you try the one in the article I've sent earlier? ...and always 'Run As admin'.... Yea Ia m using Polaris Bios editor 1.4 and atiwinflash Use the latest v1.6. You definitely don't need to run PBE as an administrator. Atiwinflash does. https://github.com/jaschaknack/PolarisBiosEditorIs there a newer version of atiwinflash? mine really only lets me see 3 cards at a time. never mind - use CLI is so much better. Ty ty.
|
|
|
Okay all m y cards are hynix so I can OC them a bit? My screen for timing looks nothing like his.
Seems wrong version of PBE, you need to find one which display the timings properly... did you try the one in the article I've sent earlier? ...and always 'Run As admin'.... Yea Ia m using Polaris Bios editor 1.4 and atiwinflash
|
|
|
I dont understand the bios modding. What am I to be changing on my Polaris cards I am only get roughly 20mh/s out of them on ETH.
When i load the bios following instructions, they say change timing, the timings are all kinds of crazy hex numbers.
I also get an error about my bois being too small
You cannot use GPU-Z to save the BIOS as it only saves half of modern bioses. You must use ati flash to save the bios. You are copying the memory straps from either 1500 (hynix, micron and elpida) or 1750 (samsung) and pasting it to all memory straps higher than it, such as 1650, 1700, etc up to 2000 or higher. This makes the memory run with tighter memory settings so hashes more. But it can also make the card unstable and/or crash. How do I tell memory brand... also I am using ATI flash to pull them. They appear to already read as 2000 as thier default memory speed? When you start GPU-Z, it reports the memory brand. Also use the following article for BIOS flashing as it tells you the correct Polaris BIOS editor version to use in order to get rid of the craxy hex numbers you're seeing: http://1stminingrig.com/sapphire-nitro-rx-470-8gb-oc-bios-flash-mod-tutorial-hynix-samsung/Okay all m y cards are hynix so I can OC them a bit? My screen for timing looks nothing like his.
|
|
|
I dont understand the bios modding. What am I to be changing on my Polaris cards I am only get roughly 20mh/s out of them on ETH.
When i load the bios following instructions, they say change timing, the timings are all kinds of crazy hex numbers.
I also get an error about my bois being too small
You cannot use GPU-Z to save the BIOS as it only saves half of modern bioses. You must use ati flash to save the bios. You are copying the memory straps from either 1500 (hynix, micron and elpida) or 1750 (samsung) and pasting it to all memory straps higher than it, such as 1650, 1700, etc up to 2000 or higher. This makes the memory run with tighter memory settings so hashes more. But it can also make the card unstable and/or crash. How do I tell memory brand... also I am using ATI flash to pull them. They appear to already read as 2000 as thier default memory speed?
|
|
|
I dont understand the bios modding. What am I to be changing on my Polaris cards I am only get roughly 20mh/s out of them on ETH.
When i load the bios following instructions, they say change timing, the timings are all kinds of crazy hex numbers.
I also get an error about my bois being too small
|
|
|
I would be interested i knowing what people are getting with the 10.0 update for LBR with their 470,570,580, and 560 RX cards when dual mining
4 Rx 480 8gb (xfx ref, 2 xfx hard swap, powercolor ref) getting a total of 117mh/s eth + 257mh/s lbry This is my bat file setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x7CB5eA7Dc754Da82B49b4E8ac06639b5AB4c4797.Ajek -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal carbonjawed.1 -dpsw x -dcoin lbry -dcri 19 -esm -gser2 -eres -estale RX 560 - 13 Eth 34 LBR RX 570 - 28.6 Eth 74 LBR RX 580 - 29.4 Eth 79 LBR I decided to answer my own question How with 10 + aug 23 + win 10 My rx580s are capped at like 18-22
|
|
|
to increase hashrate, you need to mod your bios and edit your memory timings. Also, underclock and undervolt to save electricity and overclock the memory. Its not plug and play, but there many guides out there, youtube videos and bitcointalk posts. You could always check my website there is a section on bios flashing. at your own risk. no one said it was easy but for a little effort you will get 30% more hashrate for less power usage.
what is the website?
|
|
|
Im brand new here, trying to mine eth with a G73 laptop running windows 7 w/ a GTX 460M, currently getting this error:
----------------------------------------------------------------------------------------------------------------------- 12:29:22:153 129c ETH: job changed 12:29:22:153 129c new buf size: 0 12:29:22:278 8bc Setting DAG epoch #141... 12:29:23:994 1974 NVML: cannot get fan speed, error 3 12:29:25:088 8bc Setting DAG epoch #141 for GPU0 12:29:25:088 8bc Create GPU buffer for GPU0 12:29:25:104 8bc CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
12:29:27:275 1974 NVML: cannot get fan speed, error 3 12:29:28:117 8bc Set global fail flag, failed GPU0 12:29:28:117 8bc GPU 0 failed 12:29:28:149 1864 Setting DAG epoch #141 for GPU0 12:29:28:164 1864 GPU 0, CUDA error 11 - cannot write buffer for DAG ------------------------------------------------------------------------------------------------------------------------
Any help would be greatly appreciated!, Thank you
sidenote: just checked GPU RAM &:
Total available memory: 4095 MB Dedicated Video Memory: 1536 MB System Video Memory : 0 MB Sharsed System Memory: 2559 MB
IF you are trying to break your laptop - just give it to me.
|
|
|
Need some help, I have 12 cards in a system. I can run the 7 Nvidia with no issues. And I can run 3 of the 5 AMD cards with no issues, And I can run each of the 5 AMD cards solo, but if the other 2 are allowed to run with other cards it crashes my GUI. And Apparently windows but the remote client stay alive during this crash because I can DC and reconnect to it but its just a black screen, and it appears to still has for 3-5mins after this event crashes the gui, but I see nothing in windows error logs.
Are there and logs that can upload to trouble shoot the issue?
Still happening. Rig has 8 gb of ram and a 32 gb swap/VRAM and a quadcore cpu. and help is appreicated.
|
|
|
I thought btcjam is closing why continue posting here?
Because they don't know its a scam yet. Did btcjam.com scam anyone? I been using it for many years and it never scam me once. If you are planning on loaning your bitcoin you need to thoroughly examine your the lenders background. Becasue they've lied about things, and made it so some notes are untradable and worthless.
|
|
|
|