Yes, thanks for testing. Encouraging to know that restoring to the default configuration is possible!
I ended up having to flash the bitmain firmware update. I wasn't able to see the GH/S(avg) but it's working fine now. |
|
|
|
Is anyone here with the S9 11.85Th/s (550Mhz) -model overclocked to ~12.93Th/s (600Mhz)?
Is it running stable and ok with 600Mhz settings or do you notice instability in miner operation?
I've found it depends on temperature. The other morning it was 40F so my machines were running very cool. I turned one up to 650 it ran at 13.85 great for 3 hours. Temperatures here rose so I got nervous and turned it back down. I've never overclocked a s9 before so I am still very leary, especially while they are still under warranty. Except for the one I overclocked of course. Ok, so you are long-term good with 600Mhz and ~12.93Th/s? I wouldn't consider 3 hours long term. |
|
|
|
Is anyone here with the S9 11.85Th/s (550Mhz) -model overclocked to ~12.93Th/s (600Mhz)?
Is it running stable and ok with 600Mhz settings or do you notice instability in miner operation?
I've found it depends on temperature. The other morning it was 40F so my machines were running very cool. I turned one up to 650 it ran at 13.85 great for 3 hours. Temperatures here rose so I got nervous and turned it back down. I've never overclocked a s9 before so I am still very leary, especially while they are still under warranty. Except for the one I overclocked of course. |
|
|
|
|
Tried on a B1 14T miner at 625 frequency. Miner worked and was up and running. As fubly stated I wasn't getting a good hash read out. Using awesome miner I was able to determine hash rate was about the same over a 30 minute test. Problem I ran into was. I was only able to see chip temp for one board, it read 114 which I felt was way to hot. My other B1's are running high 80's. I restored my BMminer and things are back to normal. I think Fubly is heading in the right direction, just a few bugs need to be worked out. I think the goal here if I'm not mistaken is doing away with BMminer, but also achieving a better hash rate or lower frequency.
|
|
|
|
Any updates ?
Hope they do it soon. I need more miners as soon as possible. It would be great to compare the two before I purchase. |
|
|
|
Hello.My hashboard arrived at Bitmain service, UPS says it was collected and signed by MR SUNG yesterday, 09.09.2016,
but on BITMAIN service ticket it is not updated as collected.Should I worry ?
I sent a mail to bitmain support regarding this
It takes sometimes up to a week for them to update it. they update my ticket after a week with this  and send it to me is that mean it repaired or replaced or what ? they don't tell me anything They generally will ship it back to you withing a few days, once they post that status on your account. |
|
|
|
Now when kano.is is blocking both Nicehash and Westhash ?
How about MRR.
Is it all Nicehash and Westhash? I thought it was just certain ip's? |
|
|
|
Hello.My hashboard arrived at Bitmain service, UPS says it was collected and signed by MR SUNG yesterday, 09.09.2016,
but on BITMAIN service ticket it is not updated as collected.Should I worry ?
I sent a mail to bitmain support regarding this
It takes sometimes up to a week for them to update it. |
|
|
|
|
Funny, we are all kano and ck
|
|
|
|
Sure wish they would sell me one. |
|
|
|
I don't think that picture is of an S9 BB board (at least not the batch I have. Might be an earlier batch).
The center, far left on mine has a shiny aluminum shield to cover where the Ethernet cable plugged in. At least that's how it was on my S9 bb board.
I got access denied when I click on the link lol. |
|
|
|
Just tried it and got this.. cp: invalid option -- 'n' BusyBox v1.21.1 (2015-05-15 12:25:19 CST) multi-call binary. Usage: cp [OPTIONS] SOURCE... DEST Copy SOURCE(s) to DEST -a Same as -dpR -R,-r Recurse -d,-P Preserve symlinks (default if -R) -L Follow all symlinks -H Follow symlinks on command line -p Preserve file attributes if possible -f Overwrite -i Prompt before overwrite -l,-s Create (sym)links
Go Back
Have you watched his video yet? Got slow 'net connection here at work so I haven't. Speaking of which... back to work work workYes watched it twice. I'll check it again and make sure I didn't miss a step |
|
|
|
|
Just tried it and got this.. cp: invalid option -- 'n' BusyBox v1.21.1 (2015-05-15 12:25:19 CST) multi-call binary. Usage: cp [OPTIONS] SOURCE... DEST Copy SOURCE(s) to DEST -a Same as -dpR -R,-r Recurse -d,-P Preserve symlinks (default if -R) -L Follow all symlinks -H Follow symlinks on command line -p Preserve file attributes if possible -f Overwrite -i Prompt before overwrite -l,-s Create (sym)links
Go Back
|
|
|
|
They might have not just updated that page. The pins and the functions are all the same for every Beaglebone Black board. You could even go with the original Beaglebone Black. Bitmain's BB board is the Beaglebone Black with less ports and functions (it doesn't have the HDMI port, USB port and 5VDC jack for example). The s9 bb board is much bigger than the s7. I pulled apart a old s7 just to make sure and there is no way it will fit. In there email they sent me last night it said they offer every board except the s9. |
|
|
|
I have 3 hash boards arriving today. I'm excited to get them up and going. I'm a little disappointed in Bitmain. I sent back a bad BB board that got lost on its way. I asked how much they would sell me a new board for, their response was they won't sell me one. So I will basically have a worthless miner, that came broken out of the box.
I'm glad to hear you're getting three boards back today! Sorry to hear that they "lost" a BB board. It really sucks they won't sell you a part that they no doubt have in stock. I shipped my bad BB board and the bad hash board together in the same box. I thought about shipping them separately, but decided that it would be best to have as few possible points of failure in the shipping chain. You "may" be able to get an S9 BB board from Colorado in a few months. I would contact them, if you haven't already. Until then, yeah, I guess you're screwed. I generally use Colorado for everything, the board was lost 3 weeks ago, so just before bitmainwarranty was doing them. I sent 2 hash boards to them yesterday. They are super good to work with. |
|
|
|
Well, my warranty-repaired S9 parts shipped out of China yesterday, and UPS tracking shows the package just left Osaka, Japan with an estimated delivery of Monday!  So, not sure if the parts were repaired or replaced - the ticket /order form is not very clear on that. It does have the word "Replace" on it. Anyway, hopefully I'll get back a working S9 600mHz hash board and a functioning BB Black board. All will be gravy if that is the case - Just as long as they work!! If I get it back in working order on Monday, it will be three weeks exactly from the day it shipped out from my UPS store. I will have no complaints. (Other than it cost a small fortune to send the parts back to China.) As long as it works and other miners don't start dying! Wish me luck!!!  More BLOCKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!I have 3 hash boards arriving today. I'm excited to get them up and going. I'm a little disappointed in Bitmain. I sent back a bad BB board that got lost on its way. I asked how much they would sell me a new board for, their response was they won't sell me one. So I will basically have a worthless miner, that came broken out of the box. |
|
|
|
|
I have found a block. It was a batch1 14th model.
|
|
|
|
Well as you are saying that you have cheap electricity only around 1 cent/kWh so i would say it will be a pretty good investement.
If i have access to that cheper electricity i would surely buy antminer and invest some money in mining and could generate some good amount of bitcoins.
1 cent/kwh is amazing. You would be more profitable than almost any miner. |
|
|
|
|
Show Posts
