is this project still going or MN cash and duck?
|
|
|
Hi all,
Anyone knows what could be the problem that can cause this:
"Chain[5] Chip[62] junction temperature=136"
Everything else at the end of the log seem to look ok:
"Done check_asic_reg Chain[5] Chip[244] pcb temperature=62 Chain[5] Chip[62] junction temperature=136 Special fix Chain[5] Chip[62] middle Temp = 77 Done read temp on Chain[5] Chain[6] Chip[244] pcb temperature=65 Chain[6] Chip[62] junction temperature=71 Special fix Chain[6] Chip[62] middle Temp = 80 Done read temp on Chain[6] Chain[7] Chip[244] pcb temperature=62 Chain[7] Chip[62] junction temperature=66 Special fix Chain[7] Chip[62] middle Temp = 77 Done read temp on Chain[7] Max pcb temp : 65 Set fixed fan speed=80 FAN PWM: 80 read_temp_func Done! CRC error counter=0"
|
|
|
What's the registration to do some checks
|
|
|
I can presume that OP has access to a RM label printer or knows someone that works in a mailroom with time on their hand and willing to make a few extra cash.
Someone is definitely paying for them, but not the OP or his friend.
Depending on your ethics, it does not appear to be a scam, just a middle man cutting a few slices from another business who trusts their employees.
Edit: Also, why would someone buy an account for?
|
|
|
Is this like a shortcut for merit?
Personally, I would not allow this to be permitted and would punish any attempt of selling account with a ban/temp-ban.
|
|
|
Why would anyone buy an account ? Secondly, why is this allowed
|
|
|
I do remember seeing a description that the persons accepted BTC as payment but it was a collection in person.
Guess there would not have been a trust issue.
I am curious how and why would the buyer pay the eBay fees? Guess out of his own cash to avoid exchange fees until eBay implements are direct.
|
|
|
Did anyone try putting these in dielectric liquid?
I am curious how to trick the fan presence for the MB
|
|
|
long shot, but anyone has a coupon that does not plan on using?
|
|
|
This is from the Overview tab: Type T2TZ Controller Version soc MAC Address ***** Build Date 7th of August 2019 07:03 AM Platform Version t2tz_soc_20190807_070310
It has 2 fans at the back (the way out) and only 1 at the front - the big one - where the power cable and LAN are.
|
|
|
Was holding off from s17pro and now it seems to be worth it with this new one coming out and being delivered one month earlier than the s17pro in December; hmmm another blow to people who have preordered...
My worry is: depending on what batch you order will they increase the price?
Or will they be fair and leave all 3 batches (3 days apart) at the same price?
|
|
|
why did the difficulty go x2+ ?
|
|
|
are you on factory setting for the 2360/28.12
pretty typical for inno off 5-10% on power and off 5-10% on hash
you should try
balanced Balanced+ Balanced++
Every inno I have owned has been off 5-10% on power and 5-10% on hash
they all like balanced better then factory unless room is stupid cold they all run the fans too fast.
I am waiting on that 50t to ship so far it is two days late.
Do you have any stats for Balanced Balanced+ Balanced++ Like Th/s and watts, please?
|
|
|
So gear is now one date past shipping date.
So 50 x 0.00002300 = 0.00115 btc lost due to 1 day shipping delay.
It has not shipped today the second of sept making loss 0.00230 btc maybe a little less say 0.00002272 x 100 = 0.002272
Sept 1 50 x 0.00002272 = 0.001136 Sept 2 100 x 0.00002272 = 0.002272 place your bets on how bad it gets.
Realy sorry to hear they are running late on yours as well. Have you managed to get a reply from them? For me, miner_market < miner_market@innosilicon.com.cn> worked as a communication line much faster than miner_order@innosilicon.com.cn < miner_order@innosilicon.com.cn> Mine was 7 days late on shipping. I place my guess on 6 days max delay for you ?
|
|
|
2360W at the moments with 22 - 23 degrees celsius room temperature, plenty of 'fresh' air, vent at 100% , 28.12 th/s, board temp 67/69/69 uptime 9h (due to power failure, was 10ish days prior at almost 28.7th/s). It might be a good workhorse but the vent is driving me away from linking it Edit: factory settings at the moment.
|
|
|
the hash rate dropped considerately and most of the times I enjoy that as I get more with my small little rig but I saw you guys have disappeared from whattomine as well.
any plans in convincing people to come back and market it better than just a statement?
the worry, for me, is that it will slowly die
any takes on it?
|
|
|
One update on temperature:
I've changed the exhaust ducting from a 4" (was waiting on the other one to be delivered and this was the only one available) to a 5".
Overnight around 14 degrees outside and a good airflow I've managed to get 65/67/67 degrees on the boards with the fans at 95% (first time ever, but still room for improvements) down from 76 to 84 degrees.
The interesting part is that the miner shows 28 th/s now (still on factory settings, just a restart involved - guess is it now outside its +-5% tolerance), but will check the pool after 24h due to the restart.
I might try and post my fridge build, as I am mining home in a back spare room and managed to reduce the noise relatively well. Of course, if there is interest
|
|
|
For the low temperature of 16 - 20 Celsius I can only say: Winter is coming soon How did you get the fan to 65%? I believed they are 'blocked' at 100%. I am curious how many W's you are pulling Also, managed to reduce the vibration from it (and decibels by almost 10) by putting rubber legs (found on an old fridge compressor) under it.
|
|
|
Is it possible to have a batch that just does not like +ths at all?
As soon as I use any of the options to add TH/s my miner, s9j, loses TH and goes around 12th instead of at least 14,5.
Now the interface shows the correct speed, it includes the additional TH, but I checked on the pool and there I can see it is lower.
|
|
|
Why do people deliver like that? LOL Interesting as I had the same batch as you but had to upgrade to '7th of August 2019 07:03 AM' as the preloaded one was 1 weak earlier (1st of august or something). On the downside, the previous version was doing 29.5ths in factory settings, the new one only 29 I am doing factory settings and hoovering around 29ths at 80 to 82 degrees but at 2450W ~ 2500W at the moment. How many Watts do you pull from the socket?
|
|
|
|