I have VMC board, but it uses same chip, so maybe some of you have any ideas what to do? and over and over again same thing, detect errors disabling, detect ... I tried restarts, shutdowns, hfa-hash-clock down to 300.. still nothing EDIT: heh.. pump sata power connector disconneted but now there is another problem: lots of hash core error (they were also here before that power came loose).. what is the cure for that?
|
|
|
I have VMC board, but it uses same chip, so maybe some of you have any ideas what to do? and over and over again same thing, detect errors disabling, detect ... I tried restarts, shutdowns, hfa-hash-clock down to 300.. still nothing EDIT: heh.. pump sata power connector disconneted but now there is another problem: lots of hash core error (they were also here before that power came loose).. what is the cure for that?
|
|
|
Pepper Mining app is released! Read more about it at https://peppermining.com/pepper-miner-app/Ill also be hanging out for a bit starting now on the freenode habanero channel.. join ##habanero and maybe I can answer any questions you have. how can switch what board core temps I see ? Set up multiple workers/api ports or turn the other board(s) off lol! well that's something I can think myself I thought there is some option I missed.. as I can see all boards in ASC tab, but only one board in Dies ta
|
|
|
Pepper Mining app is released! Read more about it at https://peppermining.com/pepper-miner-app/Ill also be hanging out for a bit starting now on the freenode habanero channel.. join ##habanero and maybe I can answer any questions you have. how can switch what board core temps I see ?
|
|
|
Has anyone received tracking numbers from orders over the holiday weekend? Promised on Tuesday but still have have nothing.. tracking will appear in order details.. open your order and look closely.. mine was sent via fedex although it said dhl got nothing on my order sadly, was paying my BTC and it was done via PM on here did you got e-mail that order was sent? someone mentioned that Ken headed West.. maybe he is not in office to ship your order?
|
|
|
looking this I think I finally can do my water-cooling projects.. I cooled hax8a1, but it was not easy.. looking that I cant wait to get my hands on and build my open loop system
|
|
|
Has anyone received tracking numbers from orders over the holiday weekend? Promised on Tuesday but still have have nothing.. tracking will appear in order details.. open your order and look closely.. mine was sent via fedex although it said dhl
|
|
|
So amazing! Just now I saw MED Google Adwords in a bitcoin media website ( www.coinfeed.net). The Dev. is still alive. This is good news though I don't think it's the dev considering he has not been on Med twitter for 2 weeks or on here for a month. AdWords was included in dev's original plan, so I believe it's their campaign.
|
|
|
Did you remove some of the mounting plastics for the heatsink, or you used what was stated in the h110 manual? seems to me it should be possible to get it close enough by removing one of the small plastic clips, allowing it those extra mm's more closer to the cores..
never looked at the manual this was my final solution:
|
|
|
Well I am sad to report that my GR card is no longer recognized by any system after I plugged in an additional fan to the board (fan 2 header). I am now at a loss. The board powers up with the normal lights and the normal indicators when USB is plugged in. after that, nothing is recognized.
What I did to "cause" this... 1. All systems running stable ~600GH/s @ ~90C @ 800MHz 2. Power Card down 3. Plug additional fan into fan2 header pins 4. Power up card (new fan was spinning) 5. nothing, card usb not seen by multiple systems.
Anyone have any troubleshooting ideas here?
I contacted Ken and company but have had no response.
My card was running off and on (off for liquid block placement) for roughly <2 weeks total.
Thanks!
Had the same thing the other day, I pushed the reset button on the card, it rebooted and showed up on my pc. 2nd thing I did... Still no joy. One time I lost my card also, I powered it off, then removed power cable, and powered it on again (without cable) so all those energy things I do not know the word in english will disappear and after that my card was happily found and hashing again
|
|
|
btcguild reporting: 940.59 GH/s 5972992 (99.42%) 32256 / 0 / 2560 that is two (2) cards... EDIT: hashrate seems to jump up'n'down a lot... tomorrow I can give a graph.
|
|
|
ok, here I go: indeed, using parts that came along with h110 watercooler, it is not possible to fit it on card, there will be a small cap.. so I used kids construction parts that were laying around.. and fitted into coolermaster mini-itx 130 case, I must say H100i is easyer to install on the miner board and into that chassi, also H100i is same size as air-intake holes on the side of case, although I leave cover off.. Temps seem to be about the same.. this card was 659GHz tested, 0.88v.. for me eligius about the same performance or maybe a 20G+ more.. time will tell.. Still I wonder how to rise voltage to the same step as "tested" label indicates... I must say I lake the design of my miner.. If building it would not be so expensive and time consuming, I would add rPi and voila, you would get a nice miner for now I have some more to build for myself EDIT: ok,, system with H100i get hotter.. it sits infront of air ventilation hole and gets hotter than system that has H110 and is next to it but does not have fresh and cool air ventilation hole in front of it.. so for next systems for me it is H110 or H100i + better fans.. Thanks for the update did you manage to get it in contact with the cores? another stupid q - are you having the fans blow into the radiator or out from it? doesnt say in the corsair manual.. I installed fans to pull air inside the case through radiator and out. case has one 120mm and one smaller fan to push air in, also case is open in the back, so air can flow freely around the PCB also. yes, it is in contact w cores
|
|
|
2 cards on btcguild: 1,074.86 GH/s 5115392 (99.42%) 27136 / 0 / 2560
1,2G and I would be fine, but this is.. this is.. too low...
|
|
|
ok, here I go: indeed, using parts that came along with h110 watercooler, it is not possible to fit it on card, there will be a small cap.. so I used kids construction parts that were laying around.. and fitted into coolermaster mini-itx 130 case, I must say H100i is easyer to install on the miner board and into that chassi, also H100i is same size as air-intake holes on the side of case, although I leave cover off.. Temps seem to be about the same.. this card was 659GHz tested, 0.88v.. for me eligius about the same performance or maybe a 20G+ more.. time will tell.. Still I wonder how to rise voltage to the same step as "tested" label indicates... I must say I lake the design of my miner.. If building it would not be so expensive and time consuming, I would add rPi and voila, you would get a nice miner for now I have some more to build for myself EDIT: ok,, system with H100i get hotter.. it sits infront of air ventilation hole and gets hotter than system that has H110 and is next to it but does not have fresh and cool air ventilation hole in front of it.. so for next systems for me it is H110 or H100i + better fans..
|
|
|
i have put it together (to the best of my knowledge) according to the instructions..
there is your problem.. you need to be creative I get my h110 tomorrow, will keep you posted then.. at the moment my board is hashing 450-550G with h100i @800MHz
|
|
|
Do you have any image?
nope, but it's not that hard, I did something like this: 1) download Debian Wheezy rasbperryPi image from here: http://www.raspberrypi.org/downloads/2) write it to SD card: http://www.raspberrypi.org/documentation/installation/installing-images/README.md3) connect microusb for power and monitor and keyboard to rasbPi and boot up, there will be little setup, i think you should do the 1st step atleast (just choose to enlarge partition, and all will be automatic) 4) connect fash-hast card to raspbery, after that when typing 'lsusb' you should see a new device that was not there before you connected fash-hast card. 5) install some more packages: sudo apt-get install build-essential autoconf automake libtool pkg-config libcurl3-dev libudev-dev 6) clone cgminer from git git clone git://github.com/ckolivas/cgminer.git 7) compile cd cgminer ./autogen ./configure --enable-hashfast make run cgminer as usual EDIT: And don't forget to tip ckolivas
|
|
|
Anyone running these on a rpi?
yes, debian on rPi
|
|
|
Where are the Monarchs?
The fourth generation of monarch butterflies is a little bit different than the first three generations. The fourth generation is born in September and October and goes through exactly the same process as the first, second and third generations except for one part. The fourth generation of monarch butterflies does not die after two to six weeks. Instead, this generation of monarch butterflies migrates to warmer climates like Mexico and California and will live for six to eight months until it is time to start the whole process over again. http://www.monarch-butterfly.com/this is the best ever
|
|
|
If you want to see how many cores are still active after awhile, turn on debugging in cgminer and look for the inflight value in the OP_GWQ_STATUS message.
Thanks, I was wondering how I can see that Also good to know about those core counts and max theoretical hash speed (y)
|
|
|
how can you tune voltages? you can't?
|
|
|
|