Does this miner still have the Dev fee? yes. this miner has dev fee of 2% (x11) and 1% (x13). |
|
|
|
encurtando o caminhoo....
Heheheh com certeza.
Aqui sempre tive certo preconceito com Radeon, desde épocas mitológicas, mas a coisa melhorou muito desde que a AMD incorporou a ATI =), hj curto Radeon também.
A propósito, colegas mineradores com GPU Radeon, saiu novo driver Catalyst 14.6 se não me engano, ganhos consideráveis na mineração, já vi a moçada falando de R9 290X em X11 pular de 3.3 pra 4.5MH/s por placa, façam a atualização e nos deem um feedback please.
Grato
Mas o driver ainda é beta.... eu fico meio cabreiro de instalar os drivers betas da AMD por causa do linux... dava cada pipino com APUs affff Faça um pendrive com BAMT (um pendrive velho de 2Gb serve) e instale os drivers nele. Fiz isso aqui pra atualizar meu miner x11, e minha 280x tá fazendo 4.2MH/s fácil... Nem todo miner funciona no driver beta (o sgminer original não funciona). Meu miner mais novo funciona (veja aqui: https://bitcointalk.org/index.php?topic=616786.0 ), e tem também uma versão do sgminer feita pelo djm34 que funciona nele. |
|
|
|
posso estar errado mas acho que Darkcoin tem tudo para ser o novo Litecoin. Litecoin ficou parado no tempo. gosto da marca Darkcoin. problemas com o "RC3: Hard Fork on June 20th!" e o preço desabou... Moeda de alto risco 13:38 23/06/2014 | Name____ | Market Cap _____ | Price ____________ | Available Supply __ | Volume (24h) ____ | % Change (24h) | | Darkcoin | $ 43,093,797 | $ 9.77 | 4,409,274 DRK | $ 468,786 | +0.18 % | | Darkcoin | 73,033 BTC | 0.01656354 BTC | 4,409,274 DRK | 794.47 BTC | +0.18 % |
Minha opinião é que os devs da DRK não tem a menor idéia do que estão fazendo, e são melhores de gogó do que de desenvolvimento de criptomoedas. A começar pelo X11, que eles alardearam como mais seguro sendo que na verdade é MENOS seguro que o sha256 do bitcoin (ou o keccak que algumas coins usaram). Agora com essa sucessão de forks mal sucedidos. Os caras conseguem manter a atenção na moeda, mas são incapazes de cumprir o que prometem. |
|
|
|
girino,
O teu miner funciona com placas nvidia no linux?
Abs
sim, mas pra nvidia eu recomendo usar o ccminer, que é mais rapido nelas. |
|
|
|
eita! Eu testei esse seu minerador dia 20 de maio e dava erro, desisti. testei novamente na 670 GTX e deu certo. Chegou a 1.21 mh  Mas mesmo assim é muito pouco para minerar Darkcoin. Acho que faz uns R$ 0,10 por dia. valeu printScreen:  meu minerador é pra AMD, pra nvidia vc tem de usar o cudaminer/ccminer |
|
|
|
Como eu disse eu fiz das exchange onde tenho conta. Não tenho na Base Bit, vou dar uma lida na documentação durante o final de semana. Então semana que vem eu publico aqui a implementação da api da Base Bit e e mando pra eles da base bit também, caso queiram divulgar. bacana, brigadão!  |
|
|
|
Still Linux hashrate 20% lower. For 7790 X13 algo: 800-1000kHs versus 1120Khs stable on Windows 8.1 Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs . But its not stable yet. Differences between OSes are probably due to the version of the Driver. Check if you are using the same drivers on linux and windows. (and make sure you remove all the .bin files generated by the miner before running it again). Both same driver 13.12 (I tried SMOS 1.3 and BAMT 1.6.2). Whatever, catalyst 14.04 on Windows 8.1 gives 1100Khs stable too. Windows gives a more higher stable speed and not so sensitive for intensity option. I'm not saying that problem is in miner, perhaps linux OS requires additional configuration. 14.XX drivers are really faster than 13.XX. If you can upgrade your driver on BAMT or SMOS to 14.04 you should get a better performance. |
|
|
|
Still Linux hashrate 20% lower. For 7790 X13 algo: 800-1000kHs versus 1120Khs stable on Windows 8.1 Changing intensity=17 to xintensity=156 rised hashs to 900-1120Khs . But its not stable yet. Differences between OSes are probably due to the version of the Driver. Check if you are using the same drivers on linux and windows. (and make sure you remove all the .bin files generated by the miner before running it again). |
|
|
|
Pra x11 ela é bem melhor que a 280x (2Mh/s sem nem esquentar). nao testei com script. mas meu interesse nao é minerar e sim desenvolver (veja na minha assinatura link pro meu miner x11). precisava de uma 750ti pra testes... |
|
|
|
Tenho uma GeForce GTX 670 e faz uns 330 khash.
Desisti de minerar faz tempo.
já testei scrypt, x11 e os resultados são ridículos.
só AMD presta pra minerar.
tá desatualizado. x11 em NVidia é o que há. consegue 2Mh/s numa 750Ti consumindo entre 20 e 30W apenas. (contra 3Mhs numa r9 280x que custa 3x mais e consome 4x mais energia). |
|
|
|
Anyone knows if there's still an exchange for this coin?
If there's no more exchange, i'll turn the pool down at the end of the month and declare the coin dead for good. At least for me.
if the pool is dead, then it is totally dead... It's still active in ypool.net. just pool.girino.org is going down. your pool is much better and stable than ypool. it is a pity to shut it down... I'll keep it alive for some time still. But i see no future for metiscoin  And as far as it goes, it might be better to solo mine than to use a pool. (I promise that if i turn the pool off i'll provide you with a GPU miner for solo mining) thank you! Ok, time has come that i can no longer support the price of the VPS where my pool is running, and i'll have to shut it down. As promised, i'll be releasing a version of the miner that can solo miner. It is available as source code here: https://github.com/girino/cpuminerand binaries will be put here as soon as they ara available (it will take some time to compile on the several platforms): http://girino.org/metis-solo-minerTurning off of the pool will work as follows: mining will be turned off in about 24h from now. The site will still be up for one week for those who want to withdraw their mined coins. In one week from now, the site will be disabled. Everything will be backup up, so if you are unable to withdraw your mined coins before next saturday, you'll still be able to get them by sending me a PM here in the forum. I'm sorry for the inconvenience, but I now consider the coin to be dead, and it makes no sense for me to keep supporting it. Thanks to all and good luck for those who keep mining. girino. |
|
|
|
Obrigado. O mais importante é que eu envie as coins ainda amanhã pra ele. E que ele tenha como resgatar este dinheiro em Portugal ou França sem pagar altas taxas e sem demora (mas pode ser semana que vem). Também é bom que o preço do bitcoin não seja muito diferente, ou levaria prejuízo se for mais caro no Brasil.
Eu perguntaria no sub-forum de portugal como eles fazem por lá. Eles não costumam vir aqui no forum principal com frequencia, mas o forum deles é bem movimentado. |
|
|
|
Galera, Estou vendendo 3.5 BTC na exchange Basebit https://www.basebit.com.br/A cotação atual está a R$ 1599,00 por BTC, o menor preço nas 3 principais exchanges. |
|
|
|
whats the aveg. for 280x on your x13 miner ?
i use your 2% miner on x11 and im realy satisfied, hope you squeeze even more out of them soon.
reason i cant test myself is that my rigs are rented for whole week, and im realy interested whats the hash speed now
cheers
It will depend on how much Over Clock your board will support. People are reporting 6% speed increase compared with lasybears version. I measured about 4% on mine. |
|
|
|
Guys i'm on Windows 8.1 with 2x290
i get HW errors 1-5 and not any accepted shares. Mh/s do climb to 3.0+ on both.
what can cause this? scrypt and scrypt-n is mining ok. just changed to these 2x290, i had 2x280x before and i changed the conf accordingly
thanks
EDIT: x11 not working aswell. HW 1 error. mh/s are ok
"intensity" : "18",
"vector" : "1",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "32765",
"lookup-gap" : "2",
"gpu-threads" : "1",
"gpu-clock" : "947",
"gpu-memclock" : "0-1250"
This is not the right thread. My miner does not support ""kernel" " options. Each algorithm has it's own miner. please refer to the right thread or use my miner (slightly faster on x13, more stable, but charges a 1% fee on x13 and a 2% fee on x11). See first post. |
|
|
|
after some hours of working my miner closed
its not sick cards or etc
i can just go to web and start it again
using pimp
same error
on 1.5.5
1.5.3
1.4.3
any fixes ?
Can you please give me the following information so i can investigate: - What version of the miner (which of the files on the first page did you download)? - what are the command line params? - did you use a conf file, and if so, with which params? - what is your GPU model? thanks in advance, girino. |
|
|
|
i'm just not that greedy...the guy is violating the copyright and you guys are paying him to do it. grino, u waiting the full 30 days to release the source or do u just not care? cause once it's released the 2% will be removed by everyone here. I dont mind the fee but everyone here that has said the same thing would take the free version over the 2% version given the choice. that's what makes us hypocrites. I will continue with my sph version until the code can be seen if for no other reason but to support open source and gpl.
I'm not sure if this is a troll or if he is just stupid. You can support the GPL AND pay 2%, since the code for this miner is published and is GPL'ed. Next time, use your true name, no need to hide behind a fake sockpuppet. (Unless you knew your accusations were false, in which case it makes sense to use a sockpuppet to tell the lies for you) |
|
|
|
(...) 5. crie um novo arquivo texto chamado multibit.key e adicione essa privkey seguida de um espaço e da data atual (a data não importa muito, só o formato dela), conforme exemplo abaixo: 5JxCvdgrQM31cpGtZtbcLHkR1zF6qaBRUKR16zNSqtsg93Pgwdj 2014-06-08T01:54:52Z
(...) A data importa sim, ele só vai sincronizar a partir daquela data. Se vocE^tem saldo nessa carteira, coloque uma data que seja anterior ao primeiro depósito feito nela, sob risco de o multibit não detectá-lo... |
|
|
|
|
Show Posts
