J'avais pas vu ta réponse Merci superresistant!!!
|
|
|
All "stratum from pool 0 detected new block" means is that grandcoinqt uses longpoll rather than stratum. For "new block detected on network before longpoll" I suspect that there is a coding problem in the grandcoinqt.exe that allows new work to be sent to cgminer before the longpoll request is seen.
so i can't do anything about that. Thanks for your help man, i hope i will find some blocks today!!!!!!!
|
|
|
If you find a block then the coins will appear in the wallet associated with the daemon you are running. I do not know if you are running qt in server mode or grandcoind but both should point to the same wallet as well.
allright, I'm running grandcoinqt.exe as server. What's the difference between "stratum from pool 0 detected new block" and "new block detected on network before longpoll"? Thanks you.
|
|
|
According to your screen shot it is all working okay.
You are connected to your coin daemon as new blocks are detected, you have found shares with best share of 39.9K but have yet to find a share with a difficulty of greater than 344K.
When you do you will have found a block and had a success solo mining
Thanks for your reply, Do you know if i have do something to get my coins on my adress? http://www.coinwarz.com/calculators/grandcoin-mining-calculator/?h=1300&p=500.00&pc=0.10&pf=0.00&d=3.79539950&r=1000.00000000&er=0.00000936&hc=0.00Days to generate one block mining solo: 0.15 Day(s) (3 hours and 20 minutes) (can vary greatly depending on your luck) with 1300khash/s Maybe i'm realy unlucky? What's the difference between "stratum from pool 0 detected new block" and "new block detected on network before longpoll"?
|
|
|
Hello, I would like to try solo mining but i don't know if it's works. I tryed to mine all night but i earned nothing. This screenshot shows my Grandcoin.conf , my cgminer.conf and the first message when i start solo mining. Thanks for help me to figure out my problem. Reez
|
|
|
HW veut dire Hardware Error
Il doit (ou devrait) rester à 0.
Il faut que tu tests tous les différents paramètres. Perso je trouve ça pas mal mais je ne connais pas ta carte...
Par contre si tu pouvais éviter de poster des screens aussi énorme, nous donner ta ligne de commande et tes résultats est nettement plus efficace et économise la molette de ma souris :p
Hahaha, ba écoute oui je trouve ça pas trop mal pour un début, vu que j'y connais vraiment pas grand chose, maintenant des types arrivent à en tirer 650 khash/s, mais bon je pense que je vais try de bidouiller quelques trucs mais je sais pas si je vais arriver à faire mieux. Y'a des trucs que je comprend toujours pas, pourquoi des types avec la même carte que moi arrivent à mettre 24000 en thread concurrency alors que moi je suis bloqué a 8192, (c'est parce que j'ai 8 go de ram)?
|
|
|
12 hours mining, 0.10 LTC earned This is shit.
|
|
|
Looks like you are thereabouts. Tweek the GPU core down might help from there, also higher treads.
Thanks for your relplay, i'm gonna try. do you know why i can't put more that 8192 in thread concurrency?
|
|
|
Voila ou j'en suis maintenant, Comment est ce que je peux faire pour monter la thread-concurrency plus haut? dès lors qu'il dépasse un certain seuil ça bloque.
|
|
|
well i think i did something good. what do you think guys?
|
|
|
Voila ou j'ensuis... Des idées? Merci d'avance.
|
|
|
increase intensity. but you will loose performance. 12-14 for desktop use and 16-18 for dedicated mining. dedicated mining may result in the screen taking a few secounds to update
whenever i up intensity to 14, my speed hashrate is around 500. but i get lot of HW so my WU is realy low 75. I have the same amount of accepted and hardware error. Thanks for your reply
|
|
|
i did some changes it's a little better up
|
|
|
Hello guys, I'm looking for some help to improve my khash/sec, but everytime i try to follow some user's config, cgmner doesn't want to work . thanks for help me guys. Reez
|
|
|
J'avais pu trouver ça sur un forum sur des configs, mais je n'ai pas réussi à l'intégrer à un .conf.
Cards : 2x Gigabyte 7950 WF3 Rev.1 CGMiner.conf config: "scrypt" : true, "api-listen" : true, "api-allow" : "W:127.0.0.1", "auto-fan" : true, "temp-target" : "70, 70", "intensity" : "20, 20", "worksize" : "256, 256", "gpu-threads" : "1", "gpu-engine" : "1100, 1100", "gpu-memclock" : "1250, 1250", "thread-concurrency" : "16384, 16384", "gpu-powertune" : "20, 20", "gpu-vddc" : "d, d" KHash obtained : 670kh/s + 670kh/s = 1340kh/s Notes : Runs fine at 70C for GPU0 and 67C for GPU1
Est ce que tu sais pourquoi mon Cgminer se lance 1 fois sur 10 ? les autres fois il n'arrive pas s'initialiser correctement il reste bloqué sur Starting cgminer....
|
|
|
Le constructeur importe peu? Car HIS n'est pas très utilisé...
|
|
|
992.6 khash/s / A:504 / R : 125 HW : 408 / Wu : 98.8/m
il y a beaucoup d'erreur hardware j'ai l'impression.
|
|
|
J'ai modifié la vitesse des ventilateurs, c'est possible que ce soit ça qui ai produit un dysfonctionnement car le voltage, je n'y ai pas touché et au niveau de la chaleur, c'était niquel - de 50.
J'ai mis 16 et ça me parait plus stable.
A : R : HW : UW:
Que signifie HW? Que signifie UW?
|
|
|
Que veux dire SICK? ça a lair pas bon!
|
|
|
-I 20 --gpu-powertune -10 --thread-concurrency 4096 -I 15 -g 1 -w 256 pour voir C'est déjà mieux Merci! Si jamais vous avez d'autres indications je suis preneur.
|
|
|
|