HOW TO GET COINONATX (XCXT) WITH COINONAT(CXT) - You need to have CXT to get XCXT
- There is 1:1 swapping rate, this means when you send us 1 CXT you will get 1 XCXT, if you send us 5 CXT you will get 5 XCXT
- The minimum amount to swap is 5500 CXT for 5500 XCXT. If you send any amount less than that, we will wait for the payment to confirm the we will issue you a refund minus transaction fee.
- There is days maximum swapping period. If you don't swap during the 7 days then you will have to go with CXT or pay 20% extra CXT to swap
- Because both Coinonat and CoinonatX will continue to exist you will receive back 60% of the amount of the total amount of CXT you sent to us in 3 months, 20% monthly. For example, when you send us 100 CXT to swap for 100 XCXT, You will receive 100 XCXT and after 30 days you will receive back 20 CXT, after the next 30 days you will receive back 20 CXT, after another 30 days you will receive back 20 CXT. In all you receive 60% back in 90 days (3 months). The remaining 40% of CXT will be used to continue developing and promoting both CXT and XCXT to get more audience and value. Note that this is a very effective strategy to control the amount of both coins in circulation and to prevent high rate of inflation which may reduce the value of the coin. HOW TO SWAP To swap CXT for XCXT, please use the contact us for at www.coinonat.org and send the following information:
1. Name
2. Email
3. Amount of CXT you want to swap with XCXT
4. Bitcointalk Username ( if any)
5. The type wallet you want (Windows or Linux)
We will reply you with instruction on what to do. Note that we will haveto take care of those having CXT already before we will release the wallets to all other people. This is to avoid allowing those who don’t have CXT to start mining the coin and dumping it just like that as it may have bad effect on those who have CXT already.
Please note that the process of complete swapping may take up to 24 hours or more.just quoting "- There is days maximum swapping period. If you don't swap during the 7 days then you will have to go with CXT or pay 20% extra CXT to swap" |
|
|
|
Same here, too... still waiting for reply, coins are eager to be swapped  i see alot of people waiting for the swap too, did you guys get a confirmation email? i heard nothing since friday when i requested the swap. i have no idea if my request reached them. other people are happly trading and using xcxt, i see a train of complains incoming |
|
|
|
not exactly what we wanted to hear. either their webform was broken or they dont want to swap the full amount now. you should know something is wrong if you dont get confirmation mail. i dont want to scream scam, please give me my 7k+ xcxt so i can launch a masternode |
|
|
|
swaps for the 7days have been completed successfully.Second category of swap with 40% rebate starts in few hours,to last in 3 days from now
wait what? hell no... i requested on friday, heard nothing from you guys. i didnt send my forum name. now that the price of cxt dropped you try this ? |
|
|
|
I had a headache setting up the MN as well and was told it will be much more streamlined in the next wallet release. I stake my coins pending then.
yeah but staking is only 1/3 of the reward. so instead of $6 we only get $2, it still pays the server but masternode should work. i dont see why it doesnt. i am tempted to grab a node from herebut i kinda doub that it does work!??? on my very first try i tried to setup the node with coldwallet. it doesnt work as you have to use the qt wallet to setup the node and allocate the VIN i wonder how they can use their server with my coldwallet only by using the tx. why would they sell it if it doesnt work? its even cheaper than my current vps so it should be a win/win.. ill email them... but it should work like other masternodes, so i may try it again with the linux vps. neutron.conf with <alias><ip:port><masternodekey><txid><idx>
one last blink of hope, do i have to send exatly 25000.000000 so the VIN get allocated correctly? i always send more so i can cover the fee of the next try. i should try one tx with exactly 25k
OMG IT STARTED°!!^^exatcly 25k tx and unlocked for staking did the trick. Nodeshare.in was very clear in their tutorial, thanks for that. unlock for staking i got from you and still i would like the linux server and write a tutorial for it now that i see it the original tutorial first says 25001 and in second 25000 i feel stupid, wasted 3 days for this lol  dont judge me  |
|
|
|
thanks for trying to help.
this is really frustrating. i tried all that and im sure i do everything right.
i mean, what can you do wrong, send 25k to masternode-tab generated address
maybe its because of windows 8.
you need staking=0 in neutron.conf to disable staking
it wont get disabled in masternode.conf only.
i figures that out when i was trying to run without neutron.conf
i renamed the folder and started from scatch (with old blockchain)
i noticed the configuration like advanced coin control was still activated.
maybe it gets saved in windows registry?
where does the masternode "config" with txid and idx, the vin gets saved?
now i try the same wallet in a different pc.
guess i should try reinstalling the vps
I have similar problem. Masternode worked. Then I updated to wallet 1.1.1, created Nucleus node, started it (Adrenaline node at ... started), but no more income. Collateral address is ok, masternode key is ok, staking=0 in masternode.conf, but no rewards anymore. What am I doing wrong ? at least your node is starting. my wont start. like there is no money in the bank. but it is  i think you have to wait a little more. how long did you wait? give it 24-48h or even 72h. if you didnt get paid by then then something is messed up. do you guys wait the 10 confirmations of the 0.01 Fee and then start? i think my vin is incorrect. the error message pops up like it already knew it was wrong. i removed the config (be carefull, all nodes get deleted), tried a couple more times on the same pc. no vin allocation. i try a 3rd computer. i saw that xcxt masternodes uses the same config system (is it from pivx?) but they dont use the masternode.conf, everything gets set in "coinname".conf i already spend 0.5 NTRN on fees to send from x to Y and back again, i make you guys rich :p actualy the situation is kinda messed up und very unpleasant for newcomers or people that may want to join the train before it gets too fast. nobody want to buy the coin if the tec is not working  on a sidenote: with maxconnections limited and staking only the wallet doesnt freeze. |
|
|
|
Look, the guy is watching everything and he's not talking anything here.
Name: Truckman
View Profile
Activity: 98
Position:
View Profile View Forum Posts Private Message View Blog Entries View Articles Join Date: May 06, 2017, 01:13:49 AM
Last active: Today at 12:15:43 PM
what do you want him to say? people talk too much without saying anything. the tec is working, price is raising and everything is fine. go surf elsewhere and spread the word about das. come back later you may find an important update. i dont see any reason for the dev to say something only so that you guys feel good about yourself. i also dont see any real questions for him. so why would he say anything. waste of time, like my mesage here right now, but i need onions. also i believe das is open source, why not learn how to code and help development. |
|
|
|
|
is it safe to buy from nova now?
or do i need to swap coins after?
|
|
|
|
1.Rooter setting(NAT 192.168.0.254:6666).
2.CoinatX Wallet(CoinonatX-qt.exe) start.
3.Masternodes - My Masternodes - [Create..].
4.Alias = username
Address = GlobalIP:6666 (exam:114.161.223.xxx:6666)
6.[Get Config] button and CoinonatX-qt.exe quit.
7.Edit %appdata%\CoinonatX\coinonatx.conf
copy&paste the [Get Config] and replace..
rpcuser = username.
rpcpassword = userpassword.
port=6666
8.Restart CoinonatX-qt.exe.
7.Sent 5080XCXT to Collateral Address.
9.Masternodes - My Masternodes - [Start].
---------------------------
Error: could not allocate vin for collateralAddress
---------------------------
Is my method wrong???
were you able you fix it ? i have a similar problem with another mn. still waiting for swap |
|
|
|
I started staking with 25.000 Neutrons.
I get about 20 Neutrons a day.
How much does a masternode get? Is it better to run a masternode?
let me know if you have no problem starting the node.
i tried to load the blockchain from cryptochainer.com but the wallet just ignorged it and still loads the chain normal. with one exeption: blk0001.dat seems to be bigger than usual xD |
|
|
|
devs, is there a difference between the windows zip and the setup wallet? i used the zip maybe i have more luck with the setup i could imagen the setup copies some files for masternode which i am missing and theirfor cannot launch the masternode. or is it blockchain related? good thing the blockchain is up for download and i can try some things quickly... other people are running masternodes... why does my not work hmpf im loosing money everyday  and it looks like its somehow wallet related. i guess noone would be able to run masternodes if that were the case aw man |
|
|
|
@polylogic You can get the masternode.conf from Necleus =>My Necleus Nodes. Just click Get Config and copy & paste it and make some changes to make a masternode.conf You're supposed not to need neutron.conf anymore for the new wallet, but I'm not sure if you need staking=0 on it. I think the freezing is caused by scanning masternodes. and probably the code needs to be reworked. I followed this instruction, and has no problem starting a masternode. https://steemit.com/altcoin/@renk/guide-on-how-to-setup-a-neutron-usdntrn-masternodeMy problem is it goes to offline every time in a couple of hours. By the way, I could restart my masternode by sending the coins(25000) inside the collateral address again to the same collateral address whenever I get the error message. thanks for trying to help. this is really frustrating. i tried all that and im sure i do everything right. i mean, what can you do wrong, send 25k to masternode-tab generated address maybe its because of windows 8. you need staking=0 in neutron.conf to disable staking it wont get disabled in masternode.conf only. i figures that out when i was trying to run without neutron.conf i renamed the folder and started from scatch (with old blockchain) i noticed the configuration like advanced coin control was still activated. maybe it gets saved in windows registry? where does the masternode "config" with txid and idx, the vin gets saved? now i try the same wallet in a different pc. guess i should try reinstalling the vps |
|
|
|
any ideas how to fix error could not allocate vin for collateral address
address has the 25000, already at 31 confirmations i tried to send from another address (same wallet) to collateral i tried to send from the same address (same wallet) i didnt try from a second wallet (different pc) i tried to start the node with locked wallet i tried to start the node with unlocked wallet i cant imagen why this error happens from debug console: mastenode start
- you must set masternode=1 in configuration
masternode start-many
- your wallet is locked
masternode start-many
- "overall" : "Successfully started 0 masternodes, failed to start 0, total 0",
masternode debug
- not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )
so now i create a neutron.conf with masternode=1 but i dont have much hope. i also can confirm that the wallet is unresonsive every 10sec for 20 sec maybe too much connections as this wont happen right after launching the wallet.
no ideas?wtf why doesnt it work? i created a new wallet, still the same problem. guess ill have to delete the neutron folder next. can i get a slack invite? wallet#2 -> collateral = not working collateral -> collateral = not working collateral -> address 0 = not working address 0 -> collateral = not working collateral -> collateral (after wallet restart) = not working in chaincoin you have to unlock the coins in send coins input but its not possible here. linux masternode doesnt seem possible because the masternodes gets managed via ui debug console is not much help but i try to work with it now.. sorry guys but you messed up the masternodes |
|
|
|
any ideas how to fix error could not allocate vin for collateral address
address has the 25000, already at 31 confirmations i tried to send from another address (same wallet) to collateral i tried to send from the same address (same wallet) i didnt try from a second wallet (different pc) i tried to start the node with locked wallet i tried to start the node with unlocked wallet i cant imagen why this error happens from debug console: mastenode start
- you must set masternode=1 in configuration
masternode start-many
- your wallet is locked
masternode start-many
- "overall" : "Successfully started 0 masternodes, failed to start 0, total 0",
masternode debug
- not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )
so now i create a neutron.conf with masternode=1 but i dont have much hope. i also can confirm that the wallet is unresonsive every 10sec for 20 sec maybe too much connections as this wont happen right after launching the wallet. |
|
|
|
Same here, too... still waiting for reply, coins are eager to be swapped i see alot of people waiting for the swap too, did you guys get a confirmation email? i heard nothing since friday when i requested the swap. i have no idea if my request reached them. other people are happly trading and using xcxt, |
|
|
|
|
as it seems neutron doesnt have the ability to run masternode with remote (cold storage) wallet (anymore?) !?
ive read you removed the masternode.conf in favor of the current system.
most modern coins have the ability to have the masternode run remotly.
i tried to add masternode.conf in windows to /%appdata%/Neutron/
but the wallet is not working with it. its sad. i hope the wallet gets updated.
i dont want to store the wallet with the colleteral on the linux masternode vps, its a bad thing to do ^^
at home i cant properly run a masternode because of dynamic ip,
guess i have to invest into some windows server or increase my linux skills...
|
|
|
|
ok things were going great on ubuntu 17.04 with the fix. now i tried the same on ubuntu 16.04 with 1gb ram and got some error message i didnt copy (tried to build with PIE=1) then i tried to copy my build from 17.04 but it doesnt work on 16.04 (should have known) i need to deploy another 16.04 sandbox, build it there with more ram or install swap on vps, but not tonight.
alright. Ubuntu 16.04 doesnt need the fix from above. smooth build from start without much editing on my 2gb ram sandbox. now repeat that on live vps or just upload the build... guide is comming up next week ... on live vps its a different story again: cannot run as user only as root, not sure if this is supposed to be like this. but at least its syncing... now only need cli neutron@vps:~$ ./Neutrond -daemon
************************
EXCEPTION: N5boost12interprocess22interprocess_exceptionE
No such file or directory
Neutron in AppInit()
terminate called after throwing an instance of 'boost::interprocess::interprocess_exception'
what(): No such file or directory
Aborted
i installed jsonrpcake, but it cannot connect to Neutron. guess i do something wrong. rpc port should still be 32000 does a proper call look like this?: im getting timeouts
ok here is one smooth way to make rpc calls you need curl (apt install curl) curl --user <YOUR_CHOSEN_RPC_USERNAME> --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "getinfo", "params": [] }' -H 'content-type: text/plain;' http://127.0.0.1:32000/
lets see how i import private key with this xD |
|
|
|
^
darksend.cpp:977:29: error: cannot convert ‘bool’ to ‘bool*’ in initialization
bool* pfMissingInputs = false;
^~~~~
darksend.cpp: In member function ‘bool CDarkSendPool::DoAutomaticDenominating(bool, bool)’:
Depends of compiler, you can try replace pointer to false ("bool *pfMissingInputs = false;"), with pointer to false value var ( bool pfMissingInputs = false;), and pass pointer of var (&pfMissingInputs) as argument; Replace it like this in all "bool *pfMissingInputs = false": bool pfMissingInputs = false;
if(!AcceptableInputs(mempool, txCollateral, false, &pfMissingInputs)){
if(fDebug) printf ("CDarkSendPool::IsCollateralValid - didn't pass IsAcceptable\n");
return false;
}
If you have problems I can upload a github corrected version. ok i found the line with nano (ctrl + w) original looks like this: //if(!AcceptableInputs(mempool, state, txCollateral)){
bool* pfMissingInputs = false;
if(!AcceptableInputs(mempool, txCollateral, false, pfMissingInputs)){
if(fDebug) printf ("CDarkSendPool::IsCollateralValid - didn't pass IsAcceptable\n");
return false;
now all i should do is remove the * and add & ? lets see.. didnt work masternode.cpp:162:26: error: cannot convert ‘bool’ to ‘bool*’ in initialization
bool* pfMissingInputs = false;
^~~~~
masternode.cpp:191:17: warning: unused variable ‘nDoS’ [-Wunused-variable]
int nDoS = 0;
^~~~
masternode.cpp:221:137: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘int64_t {aka long int}’ [-Wformat=]
rejected, too far into the past %s - %d %d \n", vin.ToString().c_str(), sigTime, GetAdjustedTime());
^
masternode.cpp:221:137: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘int64_t {aka long int}’ [-Wformat=]
masternode.cpp: In member function ‘void CMasterNode::Check()’:
masternode.cpp:605:33: error: cannot convert ‘bool’ to ‘bool*’ in initialization
bool* pfMissingInputs = false;
^~~~~
i have to change it in other files too? ok i changed the lines in darksend.cpp & masternode.cppand voila, build complete thank you very much, that was awesome |
|
|
|
you can add more masternodes to your cold wallet. not your vps. you do need a new ip. you maybe can add ips to your vps and reroute everything with iptables.
but i dont yet know how to do it. you could add another coin to your first vps to maximise its gain. if you want to setup masternodes for the same coin you do have to get another 1000 coins and a new vps.
I sought before an another option and i find this : http://www.explorerz.top/das-masternode-guide.html (at the end) #### 2 Masternodes on one VPS #### Follow the above guide again. You don't need to install dependencies again and you don't need to compile. However, you need a new Acc 0 address and a new Masternode key. Can get them by using a separate data dir. In order to get one do: .... thats awesome i have to try it. i have read somewhere people get their masternodes disabled if using same ip:port now if this does work it would be great. cant wait to try it but im a little busy this weekend Could i setup like 10 Masternodes on the same pc at the same time whilst having 10k coins splitted up in 10x1k, or is there a need for different IP when hosting a MN
based on the above you actually can run more than 1 masternode from the same ip and vps it should be worth it to run a couple of them already now the price is raising quickly. there is no stopping das. i can only tell you to grab 10k coins and setup masternode, setup your life and the life of your children. |
|
|
|
can anyone help me with unix build? i try to build with ubuntu 17.04 server with 2gb ram and followed the official docthis is the error i get: i should have all dependencies and disabled miniupnp. You should copy ": error:". GCC does not stop on warnings. ^
darksend.cpp:977:29: error: cannot convert ‘bool’ to ‘bool*’ in initialization
bool* pfMissingInputs = false;
^~~~~
darksend.cpp: In member function ‘bool CDarkSendPool::DoAutomaticDenominating(bool, bool)’:
|
|
|
|
|
Show Posts
