getting this error ./maxcoind: line 6: syntax error near unexpected token `newline' ./maxcoind: line 6: `<!DOCTYPE html>'
Got the same error. same here so at least its not just me
|
|
|
getting this error ./maxcoind: line 6: syntax error near unexpected token `newline' ./maxcoind: line 6: `<!DOCTYPE html>'
|
|
|
@maxcoinproject 3m Pools reporting they are still having minor problems - be prepared to solo mine.
hmm The QT client would likely have a similar option to other coins to be a solo miner but that's not the same as needing a cloud terminal daemon. i also considering going solo with a cloud setup, but i have no clue how to teach the cpuminer to go solo
|
|
|
die btc die hängen bleiben kommen wohl sehr zuverlässig nach ca 7 tagen wieder zurück
es scheinen technische probleme zu sein, solange mtgox das fiat bzw die bitcoins nicht zweckentfremdet hat muss man sich imo keine allzu grossen sorgen machen. sogar wenn sie dicht machen ist das geld / die bitcoins ja nicht irgendwo im nimbus sondern noch vorhanden.
|
|
|
ich versuche gerade deinen "pro-tipp" mit der auszahlung direkt nach deinem neuen block.
nervig ist nur ständig bei blockchain.info nachzuschauen obs nen neuen block gibt.
gibts da eventuell ne bessere lösung?
|
|
|
krass wie es bitstamp kein bisschen interessiert
|
|
|
nice to see some into the wild!
|
|
|
FWIW two cointerra rigs arrived today at my hosting facility and are now hashing away. No tracking number, they just arrived.
Will
december batch?
|
|
|
- Cloud mining
- GPU mining
- Botnet mining
So fair Good luck competing with these guys on your laptop CPU. GPU mining? i thought its CPU only?
|
|
|
can be overclocked the november jupiter or not???
why dont you just start to read the fuckn thread? seriously you act like a little 5-year old.
|
|
|
schlechtestes Investment ever 1100 DEM gemined, hätt die damals in BTC tauschen sollen im Wert von 300€ Die hohe Inflation killt den Coin. Hab ebenfalls den Fehler gemacht und ein paar Tage 1 TH reingegeben.
|
|
|
Is one RPI able to handle several BJs via USB?
|
|
|
Rejected c4b91fb5 Diff 333/256 HFB 1 pool 0 (high-hash) HIGH HASH on eligius.st on ghash.io only low-hash will rejected!!! HI HF, can you explain please! Why the handling on different pools are not equal. thx fubly Eligius is always special. KNCJupiters had also lower Hashrates/higher HW-Errors at Eligius until wizkid published a eligius-cgminer version.
|
|
|
nice! done some voltage tweaks?
|
|
|
do us all a favour and go spam somewhere else plz
|
|
|
got my batch 2 shipping notice also. should be here by monday
when was the advertised batch#2 delivery date?
|
|
|
For anyone that might be running a little hot, it might be worthwhile to check the water cooler/ reapply thermal paste. i was running around 84 degrees on Die 1 and just reapplied thermal paste and reseat the water cooler head. Running about 8 degrees cooler now. Disclaimer, dont do it if you don't know what you are doing. http://imgur.com/a/7DZqdIs that 2nd picture your own application of thermal paste? I assume it is because it looks quite nice. What was the original thermal paste? Was it the stock one that comes preapplied to the waterblock? Yes the original TP is most likely what comes pre-applied with the CoolIT's from the factory. Couldn't tell you what brand that is. You can still see some remnants around the crevices on the other components on the chip, but I neglected to take a picture of that. I wish i had some more time to clean up and do a better job of spreading the TP, but i really wanted to get it back up and hashing so i could play with clock speeds more. (Also make money lol) So far 81 Degrees at 670 clock. Not bad considering i used to be 84 degrees at 600 clock. Averaging ~500GH for the last 10 minutes. Do I have the fastest baby jet so far? No one is really talking about overclocking on this thread. makes me sad as a pc overclooking guy. Edit - started seeing lot of usb errors and hw errors. I suggest not going this high.Great to see under the cooler, thanks for posting the pics. I might well join you in checking the thermal paste some time. I know it did wonders for the BFL stuff going with arctic silver instead. So how does one overclock the device? I noticed the extra options part in minepeon but I'm not sure what arguments and values need to be passed. I am curious too on the whole warranty thing. Is there some way they can 'tell' if the device is overclocked? I doubt there'd be some stateful information on the hashing board itself but I could be wrong. warranty lasts only 14 days if i remember correct? so that shouldnt be an issue i guess.
|
|
|
For anyone that might be running a little hot, it might be worthwhile to check the water cooler/ reapply thermal paste. i was running around 84 degrees on Die 1 and just reapplied thermal paste and reseat the water cooler head. Running about 8 degrees cooler now. Disclaimer, dont do it if you don't know what you are doing. http://imgur.com/a/7DZqdIs that 2nd picture your own application of thermal paste? I assume it is because it looks quite nice. What was the original thermal paste? Was it the stock one that comes preapplied to the waterblock? Yes the original TP is most likely what comes pre-applied with the CoolIT's from the factory. Couldn't tell you what brand that is. You can still see some remnants around the crevices on the other components on the chip, but I neglected to take a picture of that. I wish i had some more time to clean up and do a better job of spreading the TP, but i really wanted to get it back up and hashing so i could play with clock speeds more. (Also make money lol) So far 81 Degrees at 670 clock. Not bad considering i used to be 84 degrees at 600 clock. Averaging ~500GH for the last 10 minutes. Do I have the fastest baby jet so far? No one is really talking about overclocking on this thread. makes me sad as a pc overclooking guy. Edit - started seeing lot of usb errors and hw errors. I suggest not going this high.i am definitly looking forward to overlock as soon as the dust settles and they run smooth and stable
|
|
|
|