|
Sorry no you don't have to wait you can dial up intensity 18 and see how it goes, but the higher intensity the more likely it is to be unstable is all. If you want you can set it at 20 and watch it (temp etc).
If you continue to get hardware errors and low hashrate there is a chance that one of the 2 gpus are bad which happens from time to on the dual gpu cards.
I was just suggesting setting the intensity at 15 see if it runs fine with minimal hardware errors, then stop it set it to 16, and so on until you find an acceptable setting on your way up towards 20 intensity.
|
|
|
|
|
MSI Afterburner.
I will look at my settings at home if I remember, but I run stable at 405ish with tweaks and basic mem overclock in afterburner no voltage change or card flashing.
|
|
|
|
|
Intensity is a different range for scrypt. it goes up to 20, start increasing starting around 15 as long as it's stable and you should see a increase in hash rate. 6990s can doo 800+ scrypt with overclocks and tweaking.
|
|
|
|
I would first test on another pool if the hash remains low there you could have issues, here are some settings for reference, but if the hash rate has dropped in half the card could be damaged as well: https://litecoin.info/Mining_hardware_comparison |
|
|
|
|
Paid! Transaction info in PM.
|
|
|
|
|
Is this an auction or do you have a price in mind?
|
|
|
|
I will take them if they have not been sold. Shipping to 98033.
I just paid this morning! |
|
|
|
Shipping to 45601 cost?
Please pm me.. about 21$ USD PM Sent with address. |
|
|
|
Put me next in line!  |
|
|
|
|
Obvious Scam when an offer seems too good to be true it usually is.
William Darrell "Billy" Mays, Jr. (July 20, 1958 – June 28, 2009)
The OP is dead!
|
|
|
|
|
For the past 2 days middlecoin seems to be stealing, not reporting, or rejecting 30-40% of my hash rate that I have had over the past. I have about 1.5-1.65 MHash and its been only showing 800-900KHash for 2 days which has typically reported 1.2-1.4MHash and I checked my rig everything is running fine and reporting normal rates with standard small amount of HW/Rejections. Is there something going on like this for anyone else? Or a known issue going on with the pool?
|
|
|
|
|
Are you looking for GPU water blocks only or CPU as well? I have a CPU water cooling setup heat sink, pump, radiator, fan, hoses, clamps sitting around if you're interested in that? If interested will look at brand and get pics when at home.
|
|
|
|
You'll probably be able to tell who is using windows vs. linux in this thread I restart probably monthly and restart my asic cgminer app itself more often than that due to stability issues. |
|
|
|
|
Is like.coin-pool an actual litecoin pool? If so that is your problem. USB Erupters/curren asics can only mine sha256 coins not scrypt coins.
|
|
|
|
|
Where are they shipping from and price shipped for all to US?
|
|
|
|
|
what power on the powered hub, also 5 powered by 2 usb ports is likely 1 issue, but I'm guessing they're not getting enough power.
|
|
|
|
|
spread them out on the floor or a table and take pictures if you don't want to take the time to research and post it up!
|
|
|
|
|
Show Posts
