I have a question about the fan. Is it possible to get the spec, seems to be a 40mm and I hope that its not necessary to run it at full speed. Others have mentioned that their setup is silent. Anyone care to share their noise-levels and what you think.
I replaced all my fans with Scythe Kaze minis. One fan failed (got very noisy) because i blew air on the board with a 92mm fan, diagonal from above. Not very clever i know ! That destroyed the bearing in less than 2 months The minis are a bit quieter but they don't deliver the same airflow as the stock fans. Scythe is 14 dB/A, 4,11 CFM, Xilence (stock) 19 db/A, 5,28 CFM. The stock fans are a good balance between noise and effective cooling for a stand-alone board. Since i use additional fans to cool my units and the noise was too loud, i went with the minis. Very happy so far.
|
|
|
Take care. We still need you
|
|
|
Ordered: 3/14/2012 Shipped: Not Yet Qty: 2
|
|
|
Cool setup
|
|
|
Where did you steal them ? One wheel alone is worth more than 100 BTC
|
|
|
C = Commercial (Tj = 0°C to +85°C), I = Industrial (Tj = –40°C to +100°C). Would be nice to know what exactly makes the difference between a commercial and an industrial rated chip. I guess not much
|
|
|
No problem for me. I don't need interest. Only want my 50s back
|
|
|
Look people, I can't even find the sites that sell the units your talking about, how can they possibly win? If Google can't find it then it's a fail.
If you can't google you fail !
|
|
|
...and ztex's dynamic overclocking might not exactly help with that... Why do you think that ?! It's not that the board changes the frequency every five minutes. You start the board, it changes the frequency and after that it runs for weeks at that speed if your temperature is constant (within 5 degree C). Compared to Icarus the ZTEX modules run cooler. And that with almost 30 MHz difference. Not sure why ? Because ztex uses speed grade -3 chips, and Icarus uses speed grade -2 with industrial thermal ratings. That makes sense. Not really the expert
|
|
|
Hey Con. Will you release a version with kanos work that supports mining with Icarus and BFL (windows7, 2.3.1f) ? There is a 7.5 BTC bounty for that. Would be nice
|
|
|
...and ztex's dynamic overclocking might not exactly help with that... Why do you think that ?! It's not that the board changes the frequency every five minutes. You start the board, it changes the frequency and after that it runs for weeks at that speed if your temperature is constant (within 5 degree C). Compared to Icarus the ZTEX modules run cooler. And that with almost 30 MHz difference. Not sure why ?
|
|
|
Those of you who have this working...
Are you using 32-bit or 64-bit Java. Also, are you on Java 6 or Java 7? Lastly, where are you copying the rxtxSerial.dll files?
I use 32 bit Java 6, just copy the rxtxSerial.dll for your system to the same location as the java file.
|
|
|
So far, Sudo is only talking. He refused to point some of his hashpower to BitMinter to back up what he claims !
|
|
|
How do you know? the .bin says Tahiti...
|
|
|
Well, I'm not going to pay a bounty till I get a miner that works, so I think that takes care of it. If you did all the work already and the cgminer guy finally makes a binary for it maybe we can do a split bounty or something. +1 i feel free to test the software before i pay the bounty.
|
|
|
The bounty is now for a total of 7.5 Bitcoins, I'm adding 2.5 BTC. I want the same thing. Unzip and go, no compiling. I don't care who's feelings get hurt, I just want a binary and it's gotta be cgminer.
http://www.mediafire.com/?96tru91ydhlgrjtSend bounty to: 1xMs3fAkdo5dPvFSyxwFfRkmDPE43Jgii Thanks Do you have an Icarus running with that download ? What are the options i need to enter in the conf beside "scan-serial" : "COMX" ? First test did not work with Icarus. Can anyone confirm ? append -S auto into the Target field in windows shortcut properties when you make a shortcut to the cgminer executable. If that doesn't work try specifying both: -S COM5 -S COM3 Does not work. I know that Icarus is on port 4. I assume you mine with 7970s ?
|
|
|
Some guy at Hetzner ? Edit: just reminded me at this film where Edward Norton plays this retarded cleaner.
|
|
|
Looks like we have to sit and wait. I hope Con will make it available in the near future. Not that i'm in a rush, i have working mining software for all my hardware but i prefer an all in one solution.
|
|
|
The bounty is now for a total of 7.5 Bitcoins, I'm adding 2.5 BTC. I want the same thing. Unzip and go, no compiling. I don't care who's feelings get hurt, I just want a binary and it's gotta be cgminer.
http://www.mediafire.com/?96tru91ydhlgrjtSend bounty to: 1xMs3fAkdo5dPvFSyxwFfRkmDPE43Jgii Thanks Do you have an Icarus running with that download ? What are the options i need to enter in the conf beside "scan-serial" : "COMX" ? First test did not work with Icarus. Can anyone confirm ?
|
|
|
|