Looks like ztex has to perform some magic to make this run  |
|
|
|
There seems to be some sort of longpoll (or other connection) issue between GPUMAX and the ZTEX mining software. I get lots of rejects and overflows. BitMinter and EMC work without problem. I have no idea what the problem is. The poll loop time jumps up and also getwork and submit time. If i ping the pool the timing is about 200ms. That's not brilliant but should work ? No problems with cgminer and my 3 GPUs. Here is what i get with BitMinter and EMC. bus-0-0: ztex_ufm1_15d3-0001-02-05: f=208.00MHz, errorRate=0.02%, maxErrorRate
=0.74%, hashRate=208.0MH/s, submitted 18 new nonces, luckFactor=1.03
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=212.00MHz, errorRate=0.99%, maxErrorRate
=1.86%, hashRate=209.9MH/s, submitted 16 new nonces, luckFactor=0.94
bus-0-0: poll loop time: 15ms (USB: 0ms network: 15ms) getwork time: 144ms su
bmit time: 293ms
Total hash rate: 417.9 MH/s
Total submitted hash rate: 409.5 MH/s
--------
bus-0-0: ztex_ufm1_15d3-0001-02-05: f=208.00MHz, errorRate=0.12%, maxErrorRate
=0.74%, hashRate=207.8MH/s, submitted 15 new nonces, luckFactor=1.03
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=212.00MHz, errorRate=0.46%, maxErrorRate
=1.86%, hashRate=211.0MH/s, submitted 9 new nonces, luckFactor=0.91
bus-0-0: poll loop time: 15ms (USB: 0ms network: 15ms) getwork time: 179ms su
bmit time: 280ms
Total hash rate: 418.8 MH/s
Total submitted hash rate: 404.5 MH/s
--------
New block detected by long polling
bus-0-0: ztex_ufm1_15d3-0001-02-05: f=208.00MHz, errorRate=0.26%, maxErrorRate
=0.74%, hashRate=207.5MH/s, submitted 11 new nonces, luckFactor=1.01
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=212.00MHz, errorRate=0.96%, maxErrorRate
=1.86%, hashRate=210.0MH/s, submitted 11 new nonces, luckFactor=0.91
bus-0-0: poll loop time: 16ms (USB: 0ms network: 16ms) getwork time: 187ms su
bmit time: 287ms And now GPUMAX  bus-0-0: ztex_ufm1_15d3-0001-02-05: Using LongPolling URL http://gpumax.com:8332
/listenChannel
bus-0-0: ztex_ufm1_15d3-0001-02-05: f=200.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hashRate=200.0MH/s, submitted 1 new nonces, luckFactor=0.36
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=200.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hashRate=200.0MH/s, submitted 0 new nonces, luckFactor=0.00
bus-0-0: poll loop time: 145ms (USB: 0ms network: 145ms) getwork time: 1416ms
submit time: 1078ms
Total hash rate: 400.0 MH/s
Total submitted hash rate: 71.6 MH/s
--------
Warning: jsonParse: Parameter `data' not found
bus-0-0: ztex_ufm1_15d3-0001-02-05: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d3-0001-02-06: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d3-0001-02-05: f=204.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hashRate=204.0MH/s, submitted 16 new nonces, luckFactor=1.00
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=204.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hashRate=204.0MH/s, submitted 13 new nonces, luckFactor=0.77
bus-0-0: poll loop time: 475ms (USB: 0ms network: 475ms) getwork time: 1730ms
submit time: 2104ms
bus-0-0: Warning: 10 overflows occured. This is usually caused by a slow network
connection.
Total hash rate: 408.0 MH/s
Total submitted hash rate: 357.9 MH/s
--------
bus-0-0: ztex_ufm1_15d3-0001-02-05: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15d3-0001-02-06: Set frequency to 208.00MHz
New block detected by block monitor
New block detected by long polling
bus-0-0: ztex_ufm1_15d3-0001-02-05: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d3-0001-02-06: Set frequency to 212.00MHz
New block detected by long polling
bus-0-0: ztex_ufm1_15d3-0001-02-05: Set frequency to 208.00MHz |
|
|
|
|
Ping times are around 200ms for the pool... works well with my 3 GPUs and cgminer 2.3.1
|
|
|
|
 veni vidi vici
|
|
|
|
I have some problems here getting GPUMAX to run. Here is what i get with BitMinter. bus-0-0: ztex_ufm1_15d3-0001-02-05: f=208.00MHz, errorRate=0.02%, maxErrorRate
=0.74%, hashRate=208.0MH/s, submitted 18 new nonces, luckFactor=1.03
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=212.00MHz, errorRate=0.99%, maxErrorRate
=1.86%, hashRate=209.9MH/s, submitted 16 new nonces, luckFactor=0.94
bus-0-0: poll loop time: 15ms (USB: 0ms network: 15ms) getwork time: 144ms su
bmit time: 293ms
Total hash rate: 417.9 MH/s
Total submitted hash rate: 409.5 MH/s
--------
bus-0-0: ztex_ufm1_15d3-0001-02-05: f=208.00MHz, errorRate=0.12%, maxErrorRate
=0.74%, hashRate=207.8MH/s, submitted 15 new nonces, luckFactor=1.03
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=212.00MHz, errorRate=0.46%, maxErrorRate
=1.86%, hashRate=211.0MH/s, submitted 9 new nonces, luckFactor=0.91
bus-0-0: poll loop time: 15ms (USB: 0ms network: 15ms) getwork time: 179ms su
bmit time: 280ms
Total hash rate: 418.8 MH/s
Total submitted hash rate: 404.5 MH/s
--------
New block detected by long polling
bus-0-0: ztex_ufm1_15d3-0001-02-05: f=208.00MHz, errorRate=0.26%, maxErrorRate
=0.74%, hashRate=207.5MH/s, submitted 11 new nonces, luckFactor=1.01
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=212.00MHz, errorRate=0.96%, maxErrorRate
=1.86%, hashRate=210.0MH/s, submitted 11 new nonces, luckFactor=0.91
bus-0-0: poll loop time: 16ms (USB: 0ms network: 16ms) getwork time: 187ms su
bmit time: 287ms And now GPUMAX. bus-0-0: ztex_ufm1_15d3-0001-02-05: Using LongPolling URL http://gpumax.com:8332
/listenChannel
bus-0-0: ztex_ufm1_15d3-0001-02-05: f=200.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hashRate=200.0MH/s, submitted 1 new nonces, luckFactor=0.36
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=200.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hashRate=200.0MH/s, submitted 0 new nonces, luckFactor=0.00
bus-0-0: poll loop time: 145ms (USB: 0ms network: 145ms) getwork time: 1416ms
submit time: 1078ms
Total hash rate: 400.0 MH/s
Total submitted hash rate: 71.6 MH/s
--------
Warning: jsonParse: Parameter `data' not found
bus-0-0: ztex_ufm1_15d3-0001-02-05: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d3-0001-02-06: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d3-0001-02-05: f=204.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hashRate=204.0MH/s, submitted 16 new nonces, luckFactor=1.00
bus-0-0: ztex_ufm1_15d3-0001-02-06: f=204.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hashRate=204.0MH/s, submitted 13 new nonces, luckFactor=0.77
bus-0-0: poll loop time: 475ms (USB: 0ms network: 475ms) getwork time: 1730ms
submit time: 2104ms
bus-0-0: Warning: 10 overflows occured. This is usually caused by a slow network
connection.
Total hash rate: 408.0 MH/s
Total submitted hash rate: 357.9 MH/s
--------
bus-0-0: ztex_ufm1_15d3-0001-02-05: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15d3-0001-02-06: Set frequency to 208.00MHz
New block detected by block monitor
New block detected by long polling
bus-0-0: ztex_ufm1_15d3-0001-02-05: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d3-0001-02-06: Set frequency to 212.00MHz
New block detected by long polling
bus-0-0: ztex_ufm1_15d3-0001-02-05: Set frequency to 208.00MHz Why is the poll loop time so much higher ? What does the "Warning: jsonParse: Parameter `data' not found" mean ? |
|
|
|
Nice custom setup! It looks like for the 1.15x you have ditched the stock heatsink. Are those aluminum heatsinks? I am thinking copper won't make much of a difference since the key bottleneck is the transfer from the FPGA to the heatsink.
This are 1.15d boards ! The heatsinks come with them but you can't really go bigger because the heatsink would collide with some parts on the board. 1.15x leaves you more room for modifications. |
|
|
|
Hey Pirate Did you change anything ? Almost impossible to connect with my FPGA. GPU seems fine  Nope, everything seems fine. I'll check the logs. Really strange. I have getwork timings of 1500ms +. If i switch to BitMinter i'm down 300 max. Can you give me the longpoll address ? Perhaps i have to enter it manual. I get a warning: "jsonParse: Parameter `data' not found" when i start the miner but lp is working  |
|
|
|
Hey Pirate Did you change anything ? Almost impossible to connect with my FPGA. GPU seems fine |
|
|
|
And don't forget that mining elsewhere is certain to get better efficiency. GPUMAX always has much higher rejects, but that isn't a problem since they pay more.
Gigas has 0.47% stale rate. That's not really bad ! |
|
|
|
You can't see much different from the other side. Since the PSU is emitting warm air, i decided not to drill a hole in the wall. The fan would just suck hot air out of the PSU. Instead i moved the fan about 1cm from the wall to help blowing the cold air from above over the boards. It makes a big difference ! At first my plan was to go only with the 120mm fan but it did not work out as i expected. Both fans run at 13.8V which gives them a little boost. They are from be quiet, below 20db. Best fans for the money imo ! I love them. You can see that board nr6 needs some help to stay cool but the clamp is also transfering some heat away.  |
|
|
|
|
People like Inaba or Meni warned him when he started A1. Now he's complaining about the scammer tag. He had plenty of time to come clean. On top of not paying his miners he is calling other pool operators idiots... that's lowest behavior.
|
|
|
|
|
I don't know... but that looks wild. Is going to be "cut and put" a new plug on, no problem.
|
|
|
|
Will you be contacting the people who pre-ordered via email? I don't always watch this thread so I was just making sure.
yes, i send about half of the email, then start the payment and ship. tomorrow another half, and payment, and ship. today i send out 10+ packages.  can't wait Edit: What kind of plug is on the cable for the power supply ? Almost every country in europe has a different plug |
|
|
|
This is very true, then you get a nice scammer tag like I did and people just keep bashing you even before you get your pool up and running. So it's totally not worth it. Just let all these other idiots deal with all the pain in the ass stuff and have them pay you to mine for them.
AFAIK someone else did pay your depts for you. You deserve that scammer tag. Don't talk the talk when no actions follow. I only see one idiot here  |
|
|
|
|
Two EP3SL340 should do the job. No idea how expensive they are today.
|
|
|
|
|
I run mine at 190 MHz. Drops the temp by about .5 to 1 degree C compared to 300 MHz. Speed is the same.
|
|
|
|
|
What is the voltage range of Icarus ? 12v only or can i use higher voltages ?
|
|
|
|
Turbor, do not shout at me. You are also in my potential scammers list now. Good luck.  it's best you stay away from BFL products. And don't say something is worth nothing just because you have no idea. Now keep mining at deepbit with your GPUs |
|
|
|
gigavps, can you post statistics from some well-known pool? Your screenshots worth nothing.
Bullshit ! GPUMAX just works like every other pool ! Stupid nonsense... |
|
|
|
|
Show Posts
