0.017BTC

Thanks hybrid, all pieces were designed by me in CAD and then 3D Printed on my machine.  Each box takes close to 24 hours to print all the pieces and I've been running the printer non-stop for the past 2 months.

I commend the thoroughness of the OP.  Very nice work going over all the details associated with these 2FA coins and how the BTC/BCC issue is affected by them.  I honestly wasn't aware of it prior and you've done a nice job summarizing the issue.  

Best of luck with the sale and I hope you find the right buyers. 

Nice coin! 

Interestingly enough, COA's were only provided for the earlier release I believe.  The later release coins I got didn't come with COA's and I'm now wondering if any of the later ones came with them.

Appreciate it, I like your idea that if you put coins in here that receive distributions, it's an energy free miner.



Thanks for the kind words!



Thanks wheelz and yes, all the major work has been completed to bring these to the community!  

In regards to the sizing, either the 5-1oz or 4-1oz & 1-ANACS would work for that, both Regular slot width.  One or the other could also be reconfigured into a new 4-1oz insert, would be quick and easy for me to do upon request.  

Noted, everyone is all set!  These will be shipping out Monday in a batch and I've provided an example order in my second post to clarify the details that will help me get you the right box setup. 

Thanks to everyone who helped this project come to life, you know who you are!    

P.S.
I wanted to add the Cryptopods prototype coin is hiding behind one of the Cas coins.




Example Order Formats

---

Top: Acrylic
Fan Grate: Open
Insert: Small 3-1oz, Storage

Top: Standard
Fan Grate: Closed
Insert: None

Top: Acrylic
Fan Grate: Open
Insert: Small 3-1oz, Storage

Top: DIY / Standard
Fan Grate: Closed
Insert: Regular 3-1oz, Storage

Today I'm releasing a new coin storage case, "Digi's Custom Coin Miner" Storage Boxes - a cryptocurrency themed Storage Box!


Coin Miner Storage Boxes

---

Each one has been printed with my own 3D printing machine and was hand assembled & checked for fitment.  They're a coin storage case I've designed styled around popular Bitcoin miners and they can hold 1oz/2oz coins, along with ANACS/other graded slabs.  Multiple insert designs and two different coin slot sizes allow a wide variety of coins & slabs to be housed in the cases.  These took me quite a bit of time to create and I'm glad to finally bring them to the community.

The default "fan grate" is closed and keeps the box dust free, there's also an open model which allows the fan blade to spin when air is blown over it:


Open Fan Grates (left) vs Closed Fan Grates (right)

---

Multiple varieties of inserts are available which makes your Storage Box unique to your needs.  The inserts are removable for the ability to change the boxes layout whenever you'd like, please be aware that less desirable inserts (single & double coin/single ANACS) will be printed on demand.  The inserts are sized for generic 1oz & 2oz rounds along with ANACS Slabs.  Before purchasing let me know which insert(s) you would like and based on the below "Insert Sizing Guide", if the 1oz coin slots (if applicable) are to be Small or Regular.


Insert Varieties

---

Extra Inserts can be purchased with any Storage Box and a free mining themed sticker (for the top) will be provided with every box.  If you do not want an insert for your box, a small amount can be knocked off the price.


Insert Sizing Guide (tested for fitment)

---

Two insert sizes: Small 1oz Slot Width + Regular 1oz Slot Width

Small 1oz Slot Width:
 - Casascius in custom capsule (loose fit)
 - Cryptoimperator BTC
 - Cryptoimperator DOGE
 - Cryptoimperator Silver
 - Cryptopods
 - Cryptovault
 - F*d BTC
 - Friends of Satoshi
 - Ravenbit
 
Regular 1oz Slot Width:
 - BTCC 1/2 BTC
 - Bitpiece
 - Cas 25BTC in custom capsule
 - Denarium smaller capsules
 - Cryptolator
 - F*d BTC/ETH Silver
 - Game Coins
 - Gox Coins
 - Monero Coins
 - NastyFans 1oz
 - Physibit Poker Chips
 - Satori Coins in Direct Fit 39mm
 - Shibanu DOGE
 - Silk Road Anonymous Mint Tokens
 
2oz Slot Width (same for Small + Regular):
 - BTCC 1 BTC
 - Dignitas Coins 2oz
 - NastyFans 2oz
 - SQL Coins
 
ANACS Slot:
 - PCGS
 - ANACS (some slabs are oversized/bulged in width and may require a little filing of the insert slot nub)


Quantity Available

---

6 - Closed Fan Grate Storage Box
1 - Open Fan Grate Storage Box

There are ~8 Acrylic Storage Box Tops left and depending on popularity I will decide whether that should be the default box layout going forward.
In the grand scope, they're quite limited with less than 75 total quantity projected until the end of this year.


Price + Shipping

---

Storage Box w/acrylic see through top =
Storage Box w/standard top =
DIY Storage Box (unassembled) w/standard top =
Extra Inserts = ea.

Shipping is free within the US and depending on your location internationally, there may be a small fee.  


Payment address

---

PM for payment


Dimensions and Warnings

---

Approx. dimensions with lid + fans: L: 135.5m, W: 60mm, H: 67.5mm
Approx. interior dimensions: L: 104mm, W: 53mm, H: 60mm

Coin Slot Warning:
Some coins fit much tighter than others, be mindful of the pressure placed on the capsule when inserted.  A few capsules I had required being fully closed before they were able to be inserted as intended.

ANACS Warning:
The ANACS fitment is tight and it should not bend the slot pegs more than 5-10 degrees when fully inserted.  During extensive testing for fitment I found some ANACS slabs (~1/10) were oversized/thicker/bulged and if they're forced into the ANACS holder to have the lid close fully this could cause one of the pegs to break on the insert.  I'd advise checking your slab fitment before fully inserting them, if it's tight you can remedy it by filing/sanding the insert pegs to remove a little bit of material.

1. I would bid at the lower increment and I don't think they're worthless, I didn't state that so please avoid putting words in my mouth. 

2. I do own more than one and the one I have for sale has been listed on my coin emporium thread for a couple months.  I won't link to it from here since I don't feel that's appropriate - it's your sales thread.

Sorry to upset you for some reason by asking for a lower bid increment and good luck with the sale I'd say. 

Thanks, figured I'd ask.  I've had trouble selling mine for less than 0.1BTC although I haven't done an auction or specific listing.

At some point in time I'm sure that was true but as the countdown to the two month deadline closes, this becomes a much slimmer chance.  He stated there were technical issues surrounding his digital components (hard drive/laptop/etc.) so I would have to assume all details are currently lost.

I sold a couple that weren't quite that low for ~0.12BTC ea. 2 or 3 months ago to give you an idea.  I'd think 0.14BTC to be the ceiling although you can shoot for whatever valuation you desire. 

Would you consider lowering the Min. bid increment to 0.005BTC?

Here's an image of what one looks like if some users were unsure. 

I've been watching this and can't wait to see the final item when complete!  Now that you're offering to hand deliver them, I don't see the final pre-order lasting long.   

Sure I can add something else for you, I'm not sure what exactly your requesting to be added but if you want to send me a PM to clarify that will work. 

0.005BTC

Wow, what a great deal Krog!  Can't believe I missed the follow up to this one last month.  

Figured I'd post the pictures here from your other thread as I don't think any interest will be drummed up without showing these. 

Photos look great, are the new coins available for purchase or will there be auctions listed?