 Show Posts
|
|
Pages: [1] 2 »
|
anyone mining with D3
im getting .38 about so far aft 24 /
hmmmmm ill keep posted
any other experiences --
anyone selling polis plz advise
trying to buy 1000 ...
namaste
Check Polis Discord channel to purchase - look up AISLING 5C for escrow service. https://discord.gg/XH7hzS |
|
|
|
Guys coin price is low thats why the reward is low.
Today price was 4 cent and reward became 69 USD a month which is ok for this price.
When the price hits 50 cent or more than the reward will be satisfactory and you will enjoy the passive income.
Vsync reward was also low due to its price. Now Vsync is 20 cent a coin and the reward is 1500 USD a month which is great !!
Good luck.
I'll wait until the buzz dies down and snap up a couple MNs at 1/3 price of $4k ATM. It's too bad there is no slack or discord thread. It is probably best to buy the MNs from a MN owner selling out than play the exchange lotto. Great coin that loves to stay under the radar. |
|
|
|
|
Why has the value not gone up for this coin?
|
|
|
|
|
It's been a few days since I set up my node but haven't received a reward. Is this normal?
Thanks.
|
|
|
|
Mining pool is incomming in few time, actually difficulty is very low you can solo mining. Last week a new pool mining added to monacoCoin project  Hi do you still recomend solo mining? or is it better to join a pool? if so which pool do you recomend? If you're the type who can wait for days or even a week not seeing any progress until the very end, solo mining could be for you. If you have ADHD like I do, normal mining that shows payment in small frequent increments is fine. |
|
|
|
Since this is an issue, I will add this to the Masternode guide today.
If you have < 2GB of RAM on the system, you won’t be able to compile Sucre. We’ll have to set up a swapfile. If you have the required 2GB, feel free to skip ahead.
cd /var
touch swap.img
chmod 600 swap.img
dd if=/dev/zero of=/var/swap.img bs=1024k count=2000
#Preparing the Disk Image
mkswap /var/swap.img
#Star
swapon /var/swap.img
#Stop
swapoff /var/swap.img
#Enable your Swap File During Boot
echo "/var/swap.img none swap sw 0 0" >> /etc/fstab
# type free to see if it's working
free
Thanks for updating - unfortunately, it keeps saying permission denied on the last step. ubuntu@i:~$ sudo echo "/var/swap.img none swap sw 0 0" >> /etc/fstab -bash: /etc/fstab: Permission denied ubuntu@ip-172-26-3-111:~$ free total used free shared buff/cache available Mem: 498380 40512 269172 1848 188696 425816 Swap: 0 0 0 |
|
|
|
Hi Which channel is the auction in? PMed but he disappeared- lol. Oh well. |
|
|
|
I have been mining here https://bulwarkpool.com/ several hours but not receiving payments (single 980GTX). Is it normal? Don't bother with single GPU. Difficulty is too high even with Antminer D3 ASIC. Bulwark didn't work for me. Mpools is pretty consistent if you can stomach 3% fee. |
|
|
|
|
Thanks.
2GB RAM is a steep requirement, especially for Linux, unless there is a way to install multiple nodes and just specify different ports in one VPS. I think this might be one of those coins where you need at least 10 nodes to make a decent passive income from it.
|
|
|
|
Mine was a 1GB of RAM with 512MB of swap. I could've upped the swap, but it was better to just get more RAM. 1 CPU.
1 CPU, 2GB of RAM worked for me.
Vultr? How much monthly for this config? Thanks. Trying to see cost effectiveness, especially for multiple nodes. |
|
|
|
need to add more swap before compile
Or get a higher RAM instance. 2GB worked just fine. The make on a 1GB server blew up for me. What are your VPS/server specs? Thanks. |
|
|
|
|
How much more of a swap file?
Does version 14 of uBuntu have similar issue?
Thanks.
|
|
|
|
I have the following issue compiling: config.status: creating Makefile
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: src/libsecp256k1-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
=-I. += -Wall -Wextra -Wno-unused-function -c src/gen_context.c -o gen_context.o
/bin/bash: =-I.: command not found
Makefile:1512: recipe for target 'gen_context.o' failed
make[3]: *** [gen_context.o] Error 127
make[3]: Leaving directory '/home/user/SucreCore/src/secp256k1'
Makefile:9940: recipe for target 'secp256k1/libsecp256k1.la' failed
make[2]: *** [secp256k1/libsecp256k1.la] Error 2
make[2]: Leaving directory '/home/user/SucreCore/src'
Makefile:9434: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/user/SucreCore/src'
Makefile:656: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
What is the version of Ubuntu? and did you follow the procedure exactly like in the guide? (see below) sudo apt -y update && sudo apt -y install build-essential libssl-dev libdb++-dev libboost-all-dev libcrypto++-dev libqrencode-dev libminiupnpc-dev libgmp-dev libgmp3-dev autoconf autogen automake libtool autotools-dev pkg-config bsdmainutils software-properties-common libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev -y git clone https://github.com/sucremoneda/SucreCore.gitgit clone https://github.com/dashpay/dash.git # (to fix a bug in secp256k1) rm -rf ~/SucreCore/src/secp256k1 cp -r ~/dash/src/secp256k1 ~/SucreCore/src/secp256k1 cd SucreCore find . -name "*.sh" -exec sudo chmod 755 {} \; ./autogen.sh ./configure # or ./configure --without-gui make Having same error output with Ubuntu 16.04 LTS. Everything is fine up to the 'make' command. Thanks. |
|
|
|
|
Hi,
What is monthly earning on a Masternode in USD? The earnings in Masternodes Online and MNRank tend to be outdated.
Thanks.
|
|
|
|
Can somebody clarify what happens after the bolded virtualenv venv command. The venv \ Scripts \ pip install -r requirements.txt
returns the following error message:
'venv' is not recognized as an internal or external command,
operable program or batch file.
--- below is the full instruction from desper:
Install Virtualenv by running pip install virtualenv
Download the sent and unzip to the directory C: \ sentinel (you can specify another, but for example here it will be this one)
We execute in the directory C: \ sentinel
virtualenv venv
venv \ Scripts \ pip install -r requirements.txt <--- executing command this shows the result in the venv error message
Editing sentinel.conf by specifying the path to monacoCoin.conf in the monacoCoin_conf parameter.
Create a C: \ sentinel \ sentinel.bat file with the following content:
@echo off
set HOME =.
cd С: \ sentinel
C: \ sentinel \ venv \ Scripts \ python C: \ sentinel \ bin \ sentinel.py
Create a C: \ sentinel \ sentinel.vbs file with the following content:
Install WshShell = CreateObject ("WScript.Shell")
WshShell.Run chr (34) & "C: \ sentinel \ sentinel.bat" & Chr (34), 0
Install WshShell = Nothing
This intermediate vbs-script is needed in order to not open the console window when executing through the task scheduler.
We add the action C: \ sentinel \ sentinel.vbs to the task scheduler (Control Panel -> Administration -> Task Scheduler -> Create Task ...)
Trigger indicate "Daily", repeat the task 1 min.
Have you tried the official sentinel instructions at https://github.com/monacocoin-net/sentinel ? I ask as it has a simpler set of instructions to install sentinel and get it working. The “simpler” set of instruction is for Linux. I am asking for Windows. Installing Sentinel on Windows It is assumed that the first steps to install the masterware have already been completed before installing Sentinel. Download and install Python 2.7.x from here https://www.python.org/downloads/Add C: \ Python27 and C: \ Python27 \ Scripts to the PATH environment variable. (System Properties -> Environment Variables) Install PIP - https://pip.pypa.io/...-to-install-pip. For this you need to download https://bootstrap.pypa.io/get-pip.py and run python get-pip.py in the same directory. Other ways to install PIP on Windows: http: //stackoverflow...pip-on-windows Install Virtualenv by running pip install virtualenv at first do it!!!!!!!!!!Did all of that- doesn’t work. I don’t think the Monoeci team got it to work either. If you could include step-by-step screenshots, that would really help. I have yet to see a single post from a member who got a Masternode working in Windows, using this instruction to install Sentinel. So yelling at me won’t make the instructions work. But thank you for your help. At least you tried. You may also want to check that nonworking stack overflow link. |
|
|
|
Can somebody clarify what happens after the bolded virtualenv venv command. The venv \ Scripts \ pip install -r requirements.txt
returns the following error message:
'venv' is not recognized as an internal or external command,
operable program or batch file.
--- below is the full instruction from desper:
Install Virtualenv by running pip install virtualenv
Download the sent and unzip to the directory C: \ sentinel (you can specify another, but for example here it will be this one)
We execute in the directory C: \ sentinel
virtualenv venv
venv \ Scripts \ pip install -r requirements.txt <--- executing command this shows the result in the venv error message
Editing sentinel.conf by specifying the path to monacoCoin.conf in the monacoCoin_conf parameter.
Create a C: \ sentinel \ sentinel.bat file with the following content:
@echo off
set HOME =.
cd С: \ sentinel
C: \ sentinel \ venv \ Scripts \ python C: \ sentinel \ bin \ sentinel.py
Create a C: \ sentinel \ sentinel.vbs file with the following content:
Install WshShell = CreateObject ("WScript.Shell")
WshShell.Run chr (34) & "C: \ sentinel \ sentinel.bat" & Chr (34), 0
Install WshShell = Nothing
This intermediate vbs-script is needed in order to not open the console window when executing through the task scheduler.
We add the action C: \ sentinel \ sentinel.vbs to the task scheduler (Control Panel -> Administration -> Task Scheduler -> Create Task ...)
Trigger indicate "Daily", repeat the task 1 min.
Have you tried the official sentinel instructions at https://github.com/monacocoin-net/sentinel ? I ask as it has a simpler set of instructions to install sentinel and get it working. The “simpler” set of instruction is for Linux. I am asking for Windows. |
|
|
|
|
Can somebody clarify what happens after the bolded virtualenv venv command. The venv \ Scripts \ pip install -r requirements.txt
returns the following error message:
'venv' is not recognized as an internal or external command,
operable program or batch file.
--- below is the full instruction from desper:
Install Virtualenv by running pip install virtualenv
Download the sent and unzip to the directory C: \ sentinel (you can specify another, but for example here it will be this one)
We execute in the directory C: \ sentinel
virtualenv venv
venv \ Scripts \ pip install -r requirements.txt <--- executing command this shows the result in the venv error message
Editing sentinel.conf by specifying the path to monacoCoin.conf in the monacoCoin_conf parameter.
Create a C: \ sentinel \ sentinel.bat file with the following content:
@echo off
set HOME =.
cd С: \ sentinel
C: \ sentinel \ venv \ Scripts \ python C: \ sentinel \ bin \ sentinel.py
Create a C: \ sentinel \ sentinel.vbs file with the following content:
Install WshShell = CreateObject ("WScript.Shell")
WshShell.Run chr (34) & "C: \ sentinel \ sentinel.bat" & Chr (34), 0
Install WshShell = Nothing
This intermediate vbs-script is needed in order to not open the console window when executing through the task scheduler.
We add the action C: \ sentinel \ sentinel.vbs to the task scheduler (Control Panel -> Administration -> Task Scheduler -> Create Task ...)
Trigger indicate "Daily", repeat the task 1 min.
|
|
|
|
i was able to setup the MN using the monocei binaries.. also if done quickly, it is possible to make sure the status of the MN stays ENABLED. Windows ( local HOT wallet) 1) Download the windows wallet from https://github.com/monacocoin-net/monoeci-core/releases2) let it sync. 3) once sync is done, stop the old Monaco wallet and Monocei wallet on windows 4) copy paste wallet.dat and masternode.conf which comes from your MonacoCoin Core directory Copy and paste monaco.conf and rename to monoeci.conf 5) Start the Monocei wallet. Linux VPS 1) Download the linux binaries https://github.com/monacocoin-net/monoeci-core/releases. 2) Stop the linux daemon for monaco "./monacoCoin-cli -daemon" 3) start the monocei daemon "./monoecid -daemon" 4) let it sync for a while. 5) once sync is done, stop the monocie daemon 6) copy the monaco.conf and rename to monoeci.conf 7) restart the linux daemon. PS: in case you have issues with running lnux daemon, please use the following files https://www.dropbox.com/s/rbtwujk0wma2i1s/monocei.tar.gz?dl=0these files are for ubuntu 16.04 setup sentinel as mentoined in dev guide. wait for some time and check you MN status. Does this instruction get around the problem not having Sentinel in Windows?
Thanks!Never mind- still broken in Windows. No sentinel, no Masternode. officially there is no sentinel for windows, even DASH doesn't support that, from where sentinel came. however if you google it people have been able to run sentinel on windows. if you are using windows 10, there is also a linux subsytem, you could install ans use sentinel there. https://docs.microsoft.com/en-us/windows/wsl/install-win10Assuming I get that far, how do I point the Windows wallet to sentinel running in the linux subsystem? I have one VPS (Amazon lightsail) running Server 2016, which I believe can activate a linux subsystem. The plan is to have up to 5 masternode running in 5 VPS. so your setup would we controller wallet on windows and MN wallet on linux subsystem. then the sentinel will control the linux wallet. both windows and linux will function separately. I guess the better question is, how do I point the Monoeci Core in Windows to the Linux subsystem? My frustration so far with this whole thing are the incomplete instructions. The posts here assumes successful setup of sentinel in Windows, but I have yet to actually anybody who has gotten it to work to post full instructions from start to finish and screenshots to prove it is running. If somebody has, please share. There are many members willing to setup masternodes, but the incomplete instructions delay the process needlessly. I hear many confirmation they have it up and running, but no screenshot or shared information. Not really sure why the devs are delaying update of instructions. |
|
|
|
Hi guys,
Why has the price fall so hard lately?
Low price is good for buying XMCC, then hold until the price goes up. Given the Monaco government does not want the name used, Monoeci may take longer to be adopted. Not sure at this point if Monoeci will be the currency of choice in Monaco. |
|
|
|
i was able to setup the MN using the monocei binaries.. also if done quickly, it is possible to make sure the status of the MN stays ENABLED. Windows ( local HOT wallet) 1) Download the windows wallet from https://github.com/monacocoin-net/monoeci-core/releases2) let it sync. 3) once sync is done, stop the old Monaco wallet and Monocei wallet on windows 4) copy paste wallet.dat and masternode.conf which comes from your MonacoCoin Core directory Copy and paste monaco.conf and rename to monoeci.conf 5) Start the Monocei wallet. Linux VPS 1) Download the linux binaries https://github.com/monacocoin-net/monoeci-core/releases. 2) Stop the linux daemon for monaco "./monacoCoin-cli -daemon" 3) start the monocei daemon "./monoecid -daemon" 4) let it sync for a while. 5) once sync is done, stop the monocie daemon 6) copy the monaco.conf and rename to monoeci.conf 7) restart the linux daemon. PS: in case you have issues with running lnux daemon, please use the following files https://www.dropbox.com/s/rbtwujk0wma2i1s/monocei.tar.gz?dl=0these files are for ubuntu 16.04 setup sentinel as mentoined in dev guide. wait for some time and check you MN status. Does this instruction get around the problem not having Sentinel in Windows?
Thanks!Never mind- still broken in Windows. No sentinel, no Masternode. officially there is no sentinel for windows, even DASH doesn't support that, from where sentinel came. however if you google it people have been able to run sentinel on windows. if you are using windows 10, there is also a linux subsytem, you could install ans use sentinel there. https://docs.microsoft.com/en-us/windows/wsl/install-win10Assuming I get that far, how do I point the Windows wallet to sentinel running in the linux subsystem? I have one VPS (Amazon lightsail) running Server 2016, which I believe can activate a linux subsystem. The plan is to have up to 5 masternode running in 5 VPS. |
|
|
|
|
