delle54
|
|
June 02, 2017, 08:16:09 PM |
|
I wanted start to mining but i got a problem!! Rx 480 rx 470 they are not available anymore in Internet!!!! I'm going to sell one of each on ebay.de on the weekend
|
|
|
|
preda
|
|
June 02, 2017, 08:20:07 PM |
|
Hi guys,
I wanted start to mining but i got a problem!! Rx 480 rx 470 they are not available anymore in Internet!!!!
So.... what i did.... i thought something else to find good enough....
I tried to buy cheap gtx 1060 3gb which i paid 177 euro... No struggling with bios and other things, just msi afterburner core +100 memory +900/950 i get 23.5 MH/s ethereum as well as are the consumption about 90w each card.
So my actual rigs they are
6x 1060 3gb about 137 MH/s 700w (177 euro x6) 6x 1060 3gb 137mh 700w 5x rx 480 about 130 mh 900w (250 euro x 5) 4x rx 480 130 mh 700/750
Do some calculations and you will get that nvidia they are actually better than amd costing 250😉😉😉 hope to have help you.
Dual mining on 6x rx 480 167 mh/s ETH with 5000+ mh/s DRC = 900w I didn't try to mining with eth+decred... i should try with Nvidia and post results....
|
|
|
|
frostminer
|
|
June 02, 2017, 08:59:49 PM |
|
Hi guys,
I wanted start to mining but i got a problem!! Rx 480 rx 470 they are not available anymore in Internet!!!!
So.... what i did.... i thought something else to find good enough....
I tried to buy cheap gtx 1060 3gb which i paid 177 euro... No struggling with bios and other things, just msi afterburner core +100 memory +900/950 i get 23.5 MH/s ethereum as well as are the consumption about 90w each card.
So my actual rigs they are
6x 1060 3gb about 137 MH/s 700w (177 euro x6) 6x 1060 3gb 137mh 700w 5x rx 480 about 130 mh 900w (250 euro x 5) 4x rx 480 130 mh 700/750
Do some calculations and you will get that nvidia they are actually better than amd costing 250😉😉😉 hope to have help you.
Dual mining on 6x rx 480 167 mh/s ETH with 5000+ mh/s DRC = 900w I didn't try to mining with eth+decred... i should try with Nvidia and post results.... The rx 570 itx does around 22mh at right under 100W 25 mh eats 135 watt.
|
|
|
|
ffthomas
|
|
June 02, 2017, 09:23:50 PM |
|
Hello Guys,
Can I mix Pitcairn (270X) and Hawaii (290X, 390) cards in the same rig? I tried that but the Pitcairn cards gave only 0,3MH/s.
I use CDM 9.4 and 16.10.3 ATI driver. I tried to disable ASM on Pitcairn cards but didn't help.
Can anyone tell me what did I wrong?
The 270X cards have 2GB RAM - is it possible to use this cards for ETH mining?
No! You need a card with minimum 3GB RAM to mine ETH. The DAG is larger than 2GB. Impossible to mine with 2GB of memory on the card. Thank you, Jackbox, I thought but I was not sure about the reason why those cards are not working on ETH.
|
|
|
|
dazz
|
|
June 02, 2017, 09:41:52 PM |
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
|
|
|
|
preda
|
|
June 02, 2017, 11:03:20 PM Last edit: June 02, 2017, 11:29:07 PM by preda |
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
i just tried all dual mining etc+pascal+sia+decred+lbry well i got impressed by etc+lbry my 4 rx 480 was gettin etc 104 mhs but when mining pascal or sia it goes 80 just decred is good but is not worth it to mine tbh last i tried etc+lbry i am getting 100mh (losing 4mh) and very well 144 mh on lbry. going to whattomine u can see that with just 144 on lbry profit is 78 dollars month which i think is very profitable rn good mining!!!!!!!!!!!!!!!!!!!!!!! lookguys what a 1060 3gb can do https://youtu.be/1uhSfOpvHks?t=7359
|
|
|
|
Holyman007
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 03, 2017, 01:46:04 AM |
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
i just tried all dual mining etc+pascal+sia+decred+lbry well i got impressed by etc+lbry my 4 rx 480 was gettin etc 104 mhs but when mining pascal or sia it goes 80 just decred is good but is not worth it to mine tbh last i tried etc+lbry i am getting 100mh (losing 4mh) and very well 144 mh on lbry. going to whattomine u can see that with just 144 on lbry profit is 78 dollars month which i think is very profitable rn good mining!!!!!!!!!!!!!!!!!!!!!!! lookguys what a 1060 3gb can do https://youtu.be/1uhSfOpvHks?t=7359If you don't want to lose etc/eth hashrate while dual mining, use the -dcri option. Start with 30 and slowly decrease/increase until you are happy with the eth/etc vs sia/pascal/lbry performance. Lower dcri for faster ETH/ETC, slower sia/pascal/lbry. And vice versa.
|
|
|
|
newmz
Sr. Member
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
|
June 03, 2017, 02:19:53 AM |
|
Hi guys,
I wanted start to mining but i got a problem!! Rx 480 rx 470 they are not available anymore in Internet!!!!
So.... what i did.... i thought something else to find good enough....
I tried to buy cheap gtx 1060 3gb which i paid 177 euro... No struggling with bios and other things, just msi afterburner core +100 memory +900/950 i get 23.5 MH/s ethereum as well as are the consumption about 90w each card.
So my actual rigs they are
6x 1060 3gb about 137 MH/s 700w (177 euro x6) 6x 1060 3gb 137mh 700w 5x rx 480 about 130 mh 900w (250 euro x 5) 4x rx 480 130 mh 700/750
Do some calculations and you will get that nvidia they are actually better than amd costing 250😉😉😉 hope to have help you.
I have one 6 GPU AMD rig (mostly R9 290s) and a 4 GPU Nvidia rig which is 2 x 1070's & 2 x 1060 6GB. I love the Nvidia rig! It's doing 105-110 mh/s for only 550-600 watts! Unbelievable right? Anyway - in your post you said that you OC the core clock +100 and memory +900/950? I have found with my Nvidia cards that I can actually underclock the core, I have all my Nvidia cards at core -200 and memory +750 - and it's no different to core +75 memory +750, and it saves some power.
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
vogonpoetry
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 03, 2017, 02:28:28 AM Last edit: June 03, 2017, 02:51:46 AM by vogonpoetry |
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
I'm having the same problem. By all accounts, this card should be mining at ~20-22MH/s but I'm only getting 12.5 no matter what I do. I've tried both the latest drivers and 15.12. Pixel Clock Patcher did nothing. Edit: After some research, it seems like this rate is par for the course for the 7970/280x due to the current DAG size slowing it down. Bummer. Seems like other coins are the only answer. Though I might just use mine to dual mine. 12.5 is better than nothing.
|
|
|
|
dakky
Newbie
Offline
Activity: 53
Merit: 0
|
|
June 03, 2017, 03:03:36 AM |
|
Is there any LINUX monitor software like ethman for win? Thanks /sorry if i asked this already
|
|
|
|
Bwtmn7
Member
Offline
Activity: 109
Merit: 10
|
|
June 03, 2017, 04:01:53 AM |
|
anyone with a FIji GPU has tried to use non 16.3.2 driver to mine? how did you replace opencl dlls?
|
|
|
|
Teress
|
|
June 03, 2017, 05:27:23 AM |
|
Is there any way how to check for memory errors in Linux like in hwinfo64 in Windows? Thanks
|
|
|
|
preda
|
|
June 03, 2017, 07:05:26 AM |
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
i just tried all dual mining etc+pascal+sia+decred+lbry well i got impressed by etc+lbry my 4 rx 480 was gettin etc 104 mhs but when mining pascal or sia it goes 80 just decred is good but is not worth it to mine tbh last i tried etc+lbry i am getting 100mh (losing 4mh) and very well 144 mh on lbry. going to whattomine u can see that with just 144 on lbry profit is 78 dollars month which i think is very profitable rn good mining!!!!!!!!!!!!!!!!!!!!!!! lookguys what a 1060 3gb can do https://youtu.be/1uhSfOpvHks?t=7359If you don't want to lose etc/eth hashrate while dual mining, use the -dcri option. Start with 30 and slowly decrease/increase until you are happy with the eth/etc vs sia/pascal/lbry performance. Lower dcri for faster ETH/ETC, slower sia/pascal/lbry. And vice versa. I tried to put -dcri 16 but it say unknown command Can u tell me the exact thing to write pls?
|
|
|
|
eRadicant
Newbie
Offline
Activity: 19
Merit: 0
|
|
June 03, 2017, 07:21:36 AM Last edit: June 03, 2017, 07:34:41 AM by eRadicant |
|
edit: nevermind
|
|
|
|
ozzy1926
|
|
June 03, 2017, 08:57:22 AM |
|
Hi guys,
I wanted start to mining but i got a problem!! Rx 480 rx 470 they are not available anymore in Internet!!!!
So.... what i did.... i thought something else to find good enough....
I tried to buy cheap gtx 1060 3gb which i paid 177 euro... No struggling with bios and other things, just msi afterburner core +100 memory +900/950 i get 23.5 MH/s ethereum as well as are the consumption about 90w each card.
So my actual rigs they are
6x 1060 3gb about 137 MH/s 700w (177 euro x6) 6x 1060 3gb 137mh 700w 5x rx 480 about 130 mh 900w (250 euro x 5) 4x rx 480 130 mh 700/750
Do some calculations and you will get that nvidia they are actually better than amd costing 250😉😉😉 hope to have help you.
I have one 6 GPU AMD rig (mostly R9 290s) and a 4 GPU Nvidia rig which is 2 x 1070's & 2 x 1060 6GB. I love the Nvidia rig! It's doing 105-110 mh/s for only 550-600 watts! Unbelievable right? Anyway - in your post you said that you OC the core clock +100 and memory +900/950? I have found with my Nvidia cards that I can actually underclock the core, I have all my Nvidia cards at core -200 and memory +750 - and it's no different to core +75 memory +750, and it saves some power. I would like to know how did you underclocked your nvidia ? Nvdia smi or afterburner?
|
|
|
|
preda
|
|
June 03, 2017, 09:08:44 AM |
|
Hi guys,
I wanted start to mining but i got a problem!! Rx 480 rx 470 they are not available anymore in Internet!!!!
So.... what i did.... i thought something else to find good enough....
I tried to buy cheap gtx 1060 3gb which i paid 177 euro... No struggling with bios and other things, just msi afterburner core +100 memory +900/950 i get 23.5 MH/s ethereum as well as are the consumption about 90w each card.
So my actual rigs they are
6x 1060 3gb about 137 MH/s 700w (177 euro x6) 6x 1060 3gb 137mh 700w 5x rx 480 about 130 mh 900w (250 euro x 5) 4x rx 480 130 mh 700/750
Do some calculations and you will get that nvidia they are actually better than amd costing 250😉😉😉 hope to have help you.
I have one 6 GPU AMD rig (mostly R9 290s) and a 4 GPU Nvidia rig which is 2 x 1070's & 2 x 1060 6GB. I love the Nvidia rig! It's doing 105-110 mh/s for only 550-600 watts! Unbelievable right? Anyway - in your post you said that you OC the core clock +100 and memory +900/950? I have found with my Nvidia cards that I can actually underclock the core, I have all my Nvidia cards at core -200 and memory +750 - and it's no different to core +75 memory +750, and it saves some power. I would like to know how did you underclocked your nvidia ? Nvdia smi or afterburner? i use msi afterburner or new evga precision tool they are the same
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
June 03, 2017, 09:38:47 AM |
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
I'm having the same problem. By all accounts, this card should be mining at ~20-22MH/s but I'm only getting 12.5 no matter what I do. I've tried both the latest drivers and 15.12. Pixel Clock Patcher did nothing. Edit: After some research, it seems like this rate is par for the course for the 7970/280x due to the current DAG size slowing it down. Bummer. Seems like other coins are the only answer. Though I might just use mine to dual mine. 12.5 is better than nothing. Dual mining takes a lot more power, eth+sia is 40% more power than eth only. And I remember somebody said is mining musicoin+sia with 7k series card...
|
|
|
|
preda
|
|
June 03, 2017, 11:45:58 AM |
|
It's been a while since I last mined ETH+DCR or SIA. Can someone let me know what's the current normal hashrate for HD7970's please?
Now mining at miningpoolhub, ETH+SIA, dcri 90, I get some 12Mh/s in ETH and 550MH/s in SIA. That's with Crimson 17 drivers, pixel patched
Thanks
I'm having the same problem. By all accounts, this card should be mining at ~20-22MH/s but I'm only getting 12.5 no matter what I do. I've tried both the latest drivers and 15.12. Pixel Clock Patcher did nothing. Edit: After some research, it seems like this rate is par for the course for the 7970/280x due to the current DAG size slowing it down. Bummer. Seems like other coins are the only answer. Though I might just use mine to dual mine. 12.5 is better than nothing. Dual mining takes a lot more power, eth+sia is 40% more power than eth only. And I remember somebody said is mining musicoin+sia with 7k series card... i just checked it.. etc only 4x rx 480 695w from the wall etc+lbc 800w for 140mh lbc well 100w is good
|
|
|
|
polylogic
Sr. Member
Offline
Activity: 546
Merit: 254
ʕʘ̅͜ʘ̅ʔ
|
|
June 03, 2017, 12:43:17 PM Last edit: June 03, 2017, 01:16:18 PM by polylogic |
|
hey guys, claymore, i have a problem with win 10 task scheduler & rx580 nitro+ LE it launches ethdcrminer64.exe without fan control an without custom gpu power config. its kinda weird.. its seems it only loads parts of the config.txt file. it is mining but only 26mh/s, the fan control is offline, gpu gets 75c and the fans are chill at 30% ^^ while ethman doesnt show gpu temp and fan speed. after i launched saphirre trixx i saw the custom power config didnt apply too. i did set win10 task scheluder with highest priority and 1min delay after windows boot without login and saved pw. after i kill the task and launch ethdcrminer from bat file is is working normal.. 31.5mh/s full fan control, ethman showing all data and custom gpu power the logfile shows all arguments get loaded. but claymore isnt able to apply them.. even after a manual launch from task scheduler ... ADL no AMD Adapters found for security reasons i would rather not launch from autostart after login a workaround maybe could be done with trixx but i dont think it should be nessesary my old rigs dont use custom gpu power and do stable fan at 80% so the problem never came up but now that i am talking about that, ethman wont show gpu temp and fan speed on the old rigs too.. they all launch from task scheduler.... so it might be the same problem... 14:53:06:195 fbc ETH - Total Speed: 30.474 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 14:53:06:195 fbc ETH: GPU0 30.474 Mh/s 14:53:06:210 fbc SC - Total Speed: 548.524 Mh/s, Total Shares: 0, Rejected: 0 14:53:06:210 fbc SC: GPU0 548.524 Mh/s 14:53:07:101 708 ADL: Cannot find any AMD adapters 14:53:10:393 708 ADL: Cannot find any AMD adapters 14:53:11:478 fbc ETH: checking pool connection... 14:53:11:478 fbc send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
14:53:11:540 fbc got 248 bytes 14:53:11:540 fbc buf: {"id":3,"jsonrpc":"2.0","result":["0xc32659eda951e0cab286baf5115765c0858c3ec3dfaf73faf33482b1c8772f91","0x647f661938636e3134265b2cca03fa33cc878d00d108c449244f0437bf1f863a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3a3212"]}
14:53:11:556 fbc parse packet: 247 14:53:11:571 fbc ETH: job is the same 14:53:11:587 fbc new buf size: 0 14:53:13:672 708 ADL: Cannot find any AMD adapters 14:53:15:360 fbc got 248 bytes 14:53:15:360 fbc buf: {"id":0,"jsonrpc":"2.0","result":["0x739c255ae7097090ce52544a107607c5f5b600886ef095266f59a4c6e3f56718","0x647f661938636e3134265b2cca03fa33cc878d00d108c449244f0437bf1f863a","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x3a3213"]}
14:53:15:360 fbc parse packet: 247 14:53:15:375 fbc ETH: job changed 14:53:15:375 fbc new buf size: 0 14:53:15:375 fbc ETH: 06/03/17-14:53:15 - New job from eu2.ethermine.org:4444 14:53:15:469 fbc target: 0x0000000112e0be82 (diff: 4000MH), epoch #127 14:53:15:469 fbc ETH - Total Speed: 23.861 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 14:53:15:485 fbc ETH: GPU0 23.861 Mh/s 14:53:15:485 fbc SC - Total Speed: 429.498 Mh/s, Total Shares: 0, Rejected: 0 14:53:15:500 fbc SC: GPU0 429.498 Mh/s
|
◾.Presale LIVE.✔.◾ Crypto Visa EU OUT NOW.✔ ◾ Bonus Payments.✔ ◾ Cashback ✔ ◾ Rainshowers ✔ ◾ Ambassador Bounty ✔ Founding the next way of banking D E Z E N T R A L I Z E D | | | | █ |
| ║ █ ║
| █ █ █
| | | | | | | | | 2gether.global
| | | | | | | | | █ █ █
| ║ █ ║
| | █
| | | AI optimized Community driven Personal banking | | | ║ █ ║
| | ❌ VFA Approved ✅ ERC-20 Token ⚠⚠ Join presale now!
| | | ║ █ ║
| | |
|
|
|
|
Bdavid1122
Newbie
Offline
Activity: 37
Merit: 0
|
|
June 03, 2017, 12:45:07 PM |
|
Ok guys I recently purchased a miner and I need to know if what I am experiencing is normal or not. I'm getting around 168mh on eth only but it's been very inconsistent. On ethermin my effective hash ranges from 120mh to 190mh, my reported hash stays around 170. I am also getting about 10 to 12 restarts a day on simplemining.
My opinions on simplemining are as follows,
-wd 1 -r 1 -epool us1.ethermine.org:4444 -ewal (my wallet) -epsw x -allpools 1 -mport -3333
Would it be beneficial to add - asm 0 or does everything seem fine?
|
|
|
|
|